Stainless steel adjustable metal sheet steam trap
Other Products
I. Introduction:
       When the CS17 stainless steel adjustable metal disc steam trap starts up, air enters the steam trap, and the valve core is in the open position at low temperature. Then condensate enters the steam trap. At low temperature, the bimetallic strip is in a flat state, and the valve core is fully open to quickly discharge the condensate. When hot condensate enters the steam trap, the bimetallic strip begins to bend and deform as the temperature rises, pulling the valve core upward to adjust the valve seat opening. Before the temperature reaches the saturation temperature, the valve core fully closes the valve. After the hot condensate accumulated in the valve cools down slowly, the temperature-sensitive bimetallic strip reduces its deformation, driving the valve core to open the valve and continue discharging condensate. Since hot condensate always exists in front of the valve, steam-water separation is formed, and no steam leakage occurs.
II. Product Features:
1. The discharge temperature can be adjusted freely, the installation posture is flexible, and all internal parts are made of stainless steel.
2. The water-seal formed by high-temperature condensate effectively reduces steam leakage.
3. Sensitive operation, water hammer resistance, no noise, and excellent drainage performance.
4. Simple structure, easy maintenance, suitable for high-temperature steam pipelines.
III. Product Installation:
1. Before installation, check the valve cavity and sealing surface, ensuring no dirt or sand particles adhere to these parts;
2. Tighten the bolts at all connection parts evenly;
3. Check that the packing part is properly compressed to ensure both the sealing performance of the packing and the flexible opening of the gate;
4. Before installing the valve, the user must verify the valve model, connection dimensions, and pay attention to the medium flow direction to ensure consistency with the valve requirements;
5. When installing the valve, the user must reserve the necessary space for valve actuation;
6. The wiring of the actuation device must be carried out according to the circuit diagram;
7. The gate valve must be maintained regularly, and must not be collided or squeezed at will, so as not to affect the sealing performance.
IV. Performance Parameters:
Shell Pressure Class | 1.6, 2.5 MPa | Maximum Working Pressure Difference | 2.5 MPa | Allowable Back Pressure Rate | ≥75% |
Load Leakage Rate | 0% | Applicable Superheated Steam | Excellent | Energy Saving Effect | Excellent |
Applicable Medium | Steam, Condensate | Discharge Mode | Continuous Mode | Water Hammer Resistance | Excellent |
| Industry Category | Machinery & Equipment/Valves/Steam Traps |
|---|---|
| Product Category | |
| Brand: | 上海舟腾 |
| Spec: | CS17 |
| Stock: | 99 |
| Manufacturer: | 上海舟腾泵阀制造有限公司 |
| Origin: | 113120 |
