Electric PVC plastic ball valve
Other Products
I. Introduction:
The Q911F-10S electric plastic ball valve adopts double union socket connection, allowing quick assembly without special tools. It features compact structure, wear resistance, easy disassembly, convenient maintenance, and simple upkeep. The valve body is made of hygienic, non-toxic material with strong corrosion resistance and light weight, making it widely applicable. Examples include pipeline systems for pure water and drinking water, drainage and sewage systems, brine and seawater systems, acid-base and chemical solution systems, and many other industries. It has a compact and beautiful appearance, light body weight for easy installation, strong corrosion resistance, wide application range, hygienic non-toxic material, wear resistance, easy disassembly, and simple maintenance.
II. Product Features:
1. Wide temperature range: -40℃~+95℃
2. Excellent strength and toughness
3. Outstanding chemical corrosion resistance
4. Flame retardant property is self-extinguishing
5. Low thermal conductivity, approximately 1/200 of steel
6. Heavy ion content in the medium meets ultra-pure water standards
7. Hygienic indicators comply with national health standards
8. Smooth inner wall, resulting in small friction resistance and adhesion when conveying fluids
9. Light weight, equivalent to 1/5 of steel pipes and 1/6 of copper pipes
10. Easy to install, can be connected via flange, union, etc.
11. Excellent aging resistance and UV resistance, significantly extending its service life compared to other pipeline systems
III. Technical Parameters:
Electric actuator options: PLVE series, PLVQ series
Action modes: On-off type, regulating type (4～20mA)
Ambient temperature: -30℃～+70℃
Power supply: AC220V, AC380V (other customizations like DC24V available) 50/60Hz
Protection class: IP67, IP68 optional
Optional functions
Explosion-proof type: Explosion-proof grade: dⅡBT3/T4
Signal feedback: Active signal, passive signal
With heater: Can dry internal components of the actuator in humid environment (optional)
Manual function: Electric actuator is equipped with manual valve opening and closing functions
Regulating type: Input 4～20mA signal to realize valve regulation function
III. Precautions:
1: Ensure correct power phase sequence is connected to avoid damage to the valve or actuator.
2: Manual operation is prohibited when power is on.
3: When used outdoors, install a protective cover on the electric actuator to prevent aging.
4: After opening the cover, tighten the screws to prevent water or dust from entering the interior of the electric actuator.
5: Do not install near explosive gases; specify explosion-proof requirements when ordering if needed.
6: Confirm that the input voltage and wiring terminals are correct.
7: Do not overload the electric actuator
IV. Part Materials:
1 Shaft | Polyvinyl Chloride (PVC) |
2) O-ring | Ethylene Propylene Diene Monomer (EPDM) |
3) Ring nut | Polyvinyl Chloride (PVC) |
4) Valve body | Polyvinyl Chloride (PVC) |
5) Port | Polyvinyl Chloride (PVC) |
6) O-ring | Ethylene Propylene Diene Monomer (EPDM) |
7) Ball seal | Polytetrafluoroethylene (PTFE) |
8) Ball | Polyvinyl Chloride (PVC) |
9 O-ring | Ethylene Propylene Diene Monomer (EPDM) |
10) Ball seal support | Polyvinyl Chloride (PVC) |
11) Ring | Polyvinyl Chloride (PVC) |
| Industry Category | Rubber & Plastics/General Purpose Plastics/PVC (Polyvinyl Chloride) |
|---|---|
| Product Category | |
| Brand: | 上海舟腾 |
| Spec: | Q911F-10S |
| Stock: | 99 |
| Manufacturer: | 上海舟腾泵阀制造有限公司 |
| Origin: | 113120 |
