Intelligent Electric Laser Bird Repeller for Substation, Tender Product for Substation

Intelligent Laser Bird Repeller for Substation Power Systems

I. Overview

Bird damage is a major disturbance to the normal operation of substations. Since the construction of the first substation, power grid staff have been carrying out bird damage prevention work in full swing. The methods have evolved from manually removing bird nests and installing bird spikes to the bird repellents widely used today. However, power grid departments have found that these measures only work in the early stage of bird damage, and the bird repelling effect is greatly reduced after birds adapt to them. In response to this situation, Telcom has developed the Intelligent Laser Bird Repeller for Substation Power Systems to repel birds around the substation. It can effectively drive away birds without harming them.

II. Working Principle

The Intelligent Laser Bird Repeller for Substation Power Systems is based on the biological instinct of organisms to seek advantages and avoid disadvantages. It uses a 520nm green laser, which is repulsive to birds. Birds that are irradiated will immediately fly away from the area and will not choose to活动 around the substation for a long time, so the bird repelling effect is very good. The portable design can target the areas of the substation severely affected by bird damage to repel birds, avoiding "idling" of the equipment. The built-in photosensitive module allows the Intelligent Laser Bird Repeller for Substation Power Systems to automatically adjust the laser power, preventing device aging caused by long-term high-power operation and extending its service life.

III. Product Technical Parameters

1. Laser: 520nm

2. Laser Power: 500Mw/1W/2W

3. Straight Line Angle: 5°

4. Horizontal Rotation Angle: 0~350°

5. Vertical Rotation Angle: ±35°

6. Time Control: Hour/Week

IV. Postscript

Due to the relatively remote location of the substation, it is very suitable for bird activities. In addition, there are many steel structures in the substation, which are obviously better choices for birds to build nests than tree branches that are easily affected by wind and rain. The debris such as iron wires and electric wires used for nesting can easily cause faults and short circuits when falling into the substation. If the birds around the substation cannot be repelled in time, it will be very detrimental to the normal operation of the substation. Once the Intelligent Laser Bird Repeller for Substation Power Systems was successfully developed, it immediately cooperated with power grid departments in Hubei, Shaanxi and other regions, replacing the original bird spike equipment in substations. On the day of installation, the bird damage problem was significantly improved. Moreover, in the later use result surveys, it was found that the Intelligent Laser Bird Repeller for Substation Power Systems would not cause birds to adapt to it, and the bird repelling effect remained outstanding as always.

V. Product Advantages

The Intelligent Laser Bird Repeller for Substation Power Systems can adjust its laser power according to the external ambient light intensity, and will stop operation at night to reduce the loss rate of the laser.

VI. Alternative Names of the Product

Comprehensive Bird Damage Prevention and Control Equipment for Substations, Solar-Powered Laser Bird Repelling Device for Substations, Intelligent Laser Bird Repeller for Substation Power Systems, Laser Bird Prevention Device

VII. Product Model

PSB100 Mr. Wang 1/3/6/8/2/3/5/0/0/2/9/