The online infrared monitoring device for wildfires can automatically identify.

Online Monitoring Device for Infrared Fire Detection and Shooting of Forest Fires

I. Overview

Winter has arrived, and most areas of the forest, after being baptized by the bleak autumn wind, have accumulated a large number of dead branches and fallen leaves, which are natural hotbeds for forest fires. At this time, a discarded cigarette butt, firecrackers set off during the Spring Festival, etc., may cause a forest fire. For the transmission lines erected in the forest, fires have a great impact on the stability of their overall operation. When the temperature is too high, it is easy to cause a trip problem. If the fire is too large, the overall integrity of the line may be damaged, which will cause huge losses to the power grid department. Telcom has developed the Online Monitoring Device for Infrared Fire Detection and Shooting of Forest Fires to address this issue. According to the feedback from the power bureau in the area where the equipment is installed, the situation in many areas with frequent forest fires has been improved.

II. Working Principle

The infrared camera at the front end of the Online Monitoring Device for Infrared Fire Detection and Shooting of Forest Fires can identify fire sources and smoke points within the detection range, and report the fire to the background management personnel in real time via wireless 4G signal. Considering the inconvenient access in the forest area, in order to shorten the time for operation and maintenance personnel to reach the fire point, a GIS geographic information system is additionally added. It can help locate the specific position of the fire point and assist in planning a reasonable fire extinguishing path, avoiding serious consequences caused by delayed fire extinguishing.

III. Technical Parameters

1. Power supply system: Solar energy + battery

2. Operating voltage: DC12V

3. Detection radius: 2KM

4. Operating temperature: 0℃~85℃

5. Focusing method: Auto focus

6. Aperture control: Auto aperture

IV. Functional Features

1. Micro fire source identification

2. Fire location

3. Active alarm, no need for real-time on-duty personnel at the background

V. Postscript

Why is there a common saying "Setting fire to the mountains will lead to a long prison term"? Because compared with fires in other places, the mountain forest areas have inconvenient vehicle access, and many fire extinguishing methods cannot be used. Coupled with the help of mountain winds, sometimes we have to wait until the combustibles on the mountain are burned out before dealing with the remaining fire. Therefore, when facing the problem of forest fires affecting transmission lines, we must start from the source and deal with the fire when it has not formed a large fire or only some ignition points appear, reducing the probability of micro fire sources developing into forest fires. Telcom's Online Monitoring Device for Infrared Fire Detection and Shooting of Forest Fires can monitor the corridors and areas on both sides within the monitoring range in real time. The front end can directly identify fire points and smoke points, and send alarm information in a timely manner, allowing operation and maintenance personnel to respond to the occurrence of forest fires in a timely manner and take countermeasures as early as possible. It is currently a widely purchased equipment for power grid departments to deal with forest fire problems. If there is a need, please call for consultation!

VI. Alternative Names of the Product

Online Monitoring Device for Infrared Fire Detection and Shooting of Forest Fires, Video Online Monitoring Equipment (Forest Fire Prevention Monitoring), Online Monitoring Device for Transmission Lines Against Forest Fires, Forest Fire Early Warning Device for Transmission Lines

VII. Product Model

TLKS-PMG-DF Mr. Wang 1/3/6/8/2/3/5/0/0/2/9