Reservoir Water Level Monitoring System
Contact Info
- Add:Optics Valley Core Center, Zip:
- Contact: 张静
- Tel:18062006340
- Email:18062006340@163.com
Other Products
Wuhan Zhongdi Hengda -- Water Level Monitoring System
System Introduction
The water level monitoring system is suitable for automatic measurement of water levels in reservoirs, dams and rivers. It has large-capacity storage function, supports multiple communication interfaces, and is applicable to application fields such as national land geological disasters, mine geological disasters, and water conservancy and hydropower monitoring. The monitoring system adopts an integrated design, integrating the sensors required for water level monitoring, data acquisition, data transmission, solar power supply, pole brackets and other components into one, making field installation simple and convenient.
Technical Parameters
Measurement Range | 30m |
Resolution | 1mm |
Accuracy | ±3mm |
Operating Temperature | -30℃~80℃ |
Adaptable Water Level Change Rate | Not less than 100cm/min |
Average Life* | ≥ 30000h |
Blind Area | 0.5m |
Power Supply Mode | Solar energy, storage battery, mains electricity |
Protection Class | IP67 |
3. System Configuration
No. | Name | Description |
1 | Radar Level Gauge | Used to measure water level |
2 | Digital Signal Collector | Used for data acquisition and storage |
3 | GPRS Antenna | Used for data transmission |
4 | Solar Panel | 100W (can be adjusted according to actual conditions, or can be replaced with mains power supply) |
5 | Storage Battery | 65Ah maintenance-free battery (can be adjusted according to actual conditions) |
6 | Charge Controller | Protects the storage battery and prevents overcharging; 12V/24V 20A |
7 | Buried Box | Houses the internal equipment and provides protection |
8 | Integrated Installation Bracket | Stainless steel galvanized steel pipe, 2 meters (can be adjusted according to actual conditions) |
9 | Cloud Platform | Data display, export, and early warning |
4. Functional Features
1) Supports sending data in different protocol formats to 3 or more addresses;
2) Automatic reconnection after disconnection, and automatically resends unsuccessfully sent data after network recovery;
3) Optional synchronous monitoring of storage battery/solar voltage, charge and discharge information, temperature and humidity, signal strength, location information, etc.;
4) Supports multiple working modes: sleep mode, online mode, early warning mode;
5) Has a threshold trigger function, and automatically reports monitoring data immediately when it exceeds the threshold;
6) Can store data for more than 2 years, with the function of automatically overwriting old data;
7) Remote control, online upgrade of hardware programs;
8) Non-contact measurement, convenient installation, and very low maintenance requirements;
9) Less affected by terrain during installation, as long as the bracket is properly set up, measurement can be carried out;
10) Radar waves have a small beam angle, extremely low transmission power, concentrated energy, and stronger anti-interference ability, greatly improving measurement accuracy and reliability;
| Industry Category | Chemicals/Chemical Machinery/Papermaking Testing Instruments |
|---|---|
| Product Category | |
| Brand: | 中地恒达 |
| Spec: | ZDHD-（Guard-SW02） |
| Manufacturer: | 武汉中地恒达科技有限公司 |
| Origin: | 114201 |
