Three zones Thermal shock testing chamber
20000USD/SET
Three zones Thermal shock testing chamber
This chamber is designed for cyclic climatic tests, to test temperature resistance of samples in a rapid temperature change.
Model |
HD-CTS3-1J |
HD-CTS3-2J |
HD-CTS3-5J |
HD-CTS3-10J |
|
Internal volume (L) |
120 L |
210 L |
504 L |
900 L |
|
Internal dimensions (D*W*H) |
400*500*600 mm |
500*600*700 mm |
700*800*900 mm |
900*1000*1000 mm |
|
External dimensions (D*W*H) |
1620*1460* 2360 mm |
1720*1560* 2460 mm |
2120*1820* 2260 mm |
2420*2020*2660 mm |
|
Preheating area
|
Preheating temperature upper limit |
200℃ |
|||
Heating time |
R.T.~+200℃: 40min (approximately) |
||||
Pre-cooling area
|
Pre-cooling temperature lower limit |
-75℃ |
|||
Cooling time |
R.T.~-70℃: 90min (approximately) |
||||
Working area
|
Temperature shocking range |
High temperature: 60℃~+150℃; Low temperature: -55℃~-10℃; |
|||
Temperature fluctuation |
≤±0.5℃ |
||||
Temperature deviation |
≤±2℃ |
||||
Temperature recovery time |
≤5min |
||||
Material |
|||||
Shell |
Cold rolled sheet steel, spray plastics on surface |
||||
Internal material |
Stainless steel |
||||
Thermal insulation material |
Polyurethane foam + glass wool |
||||
Refrigeration system |
|||||
Refrigeration mode |
Mechanical compression, two-stage refrigeration |
||||
Cooling mode |
Water cooling |
||||
Compressor |
Imported compressor |
||||
Controller |
Programmable logic controller, 7’’ LCD touch screen |
||||
Power supply |
АС380V, 50Hz, Three-phase four-wire + earth wire |
Industry Category | Measurement-Analysis-Instruments/Testing-Equipment |
---|---|
Product Category | |
Brand: | HD |
Spec: | |
Stock: | |
Origin: |