Tightsen industrial repairing adhesive products are widely used to repair, rebuild and restore of corrosion, abrasion, grind, breach parts. Make the equipment return to service quickly, increase operation life of equipment, reduce consumptions of spare parts, decrease maintenance fees, improve equipment reliabilities. |
| Metal repairing adhesive |
|
|
TS811-Cast iron repairing adhesive.
▲Rebuild and repair of porous, crackle on casting iron surface.
▲Wear and corrosion resistance ,similar to original material colors.
▲Can be drilled,tapped and machined after curing.
|
|
TS812-Steel repairing adhesive
▲Rebuild and repair various steel material imperfect, crackle and wearing.
▲Wear and corrosion resistance, similar to original material colors.
▲High strength, can be drilled, tapped and machined after curing.
|
TS813-Aluminum repairing adhesive
▲Rebuild and repair various aluminium material and cast aluminum imperfect , crackle and wearing.
▲Wear & corrosion resistance, similar to original material colors.
▲Can be drilled, tapped and machined after curing.
|
|
TS814-Copper repairing adhesive
▲Rebuild and repair various copper material and cast copper imperfect , crackle and wearing.
▲Wear & corrosion resistance, similar to original material colors.
▲Can be drilled, tapped and machined after curing.
|
| Rubber repairing adhesive |
|
|
TS801-Conveyer cold bonding adhesive
▲Polyurethanes, two components, fast curing, high strength.
▲For bonding multi layer rubber conveyer joint; also for bonding of rubber to rubber, rubber to metal, rubber to fabrics etc..
▲Equipment can be operated after 30 minutes.
|
|
TS802-Rubber repairing adhesive
▲Medium strength, medium hardness.
▲Used for repairing transport belt, cable, roller etc.. Also for insulated sealing of cable joint , protecting coat in equipment and sealing up of machine.
|
|
Anti wearing adhesive |
|
|
TS821- Anti wearing adhesive
▲Mixed with ceramic beads and metal carbide, high adhesion to substrate. For rebuilding hard sliding abrasion equipment . Such as pumps, impellers, propellers etc..
▲The wearing resistance is 2-8 times than general cast iron.
|
|
TS828-Wear & corrosion resistance adhesive
▲Rebuild and protect of large scale heavy duty abrasion equipment.
▲Fast curing speed, not flow on vertical surface.
▲Have good adherence to metal, cement and ceramic.
|
Corrosion resistance adhesive |
|
|
TS836-Ceramic beads adhesive.
▲Putty like , not flow on vertical surface, aggressave chemicals resistance.
▲For rebuilding partly corroded pump, valve, pipeline, exchanger, reaction kettle etc |
|
TS838-Brushable ceramic adhesive .
▲Low viscosity, can be brushed.
▲For sealing and protecting new or rebuilt large scale of equipment to prevent liquid erosion, pneumatic abrasion and chemical corrosion. |
| Emergent repairing adhesive |
|
|
TS851 General-purpose repairing magic stick.
▲Used for refitting leakage, damage etc
▲Stick form, cut off a section, kneed and apply on damage surface.
▲Fast curing, repair timely, easy to use. |
|
TS856- Wet surface repairing adhesive.
▲For repairing leakage or oozing in various of piping, valve, caliduct, watercraft, oil tank , water tank etc
▲Can be used on wet working environment. |
TS858-Oil surface repairing adhesive
▲Liquid, fast curing. Can repair with oil.
▲For repairing leakage or oozing in transformer, oil pans, oil piping, flange and so on. (Note: Not suitable for preventing leakages in copper pipeline). |
|
|
Technical Specification
▲Tested at 25±2℃,relative humidity 55-65%.Heating can improve cure speed when temperature when temprature under 15℃.
Product |
Container |
Color |
Compress strength(Mpa) |
Tensile strength(Mpa) |
Shear strength(Mpa) |
Peal strength(Mpa) |
Hardness(Shore D) |
Temperature range(℃) |
TS801 |
1kg |
Brown |
/ |
9.0 |
/ |
/ |
65 |
-50-120 |
TS802 |
350g |
Black |
/ |
9.0 |
/ |
/ |
68 |
-50-100 |
TS811 |
500g |
Iron |
98.7 |
32.5 |
18.0 |
56.5 |
85 |
-50-168 |
TS812 |
500g |
Steel |
106.5 |
39.2 |
17.8 |
58.3 |
86 |
-50-204 |
TS813 |
250g |
Alum |
99.6 |
33.5 |
17.0 |
21.6 |
84 |
-50-168 |
TS814 |
500g |
Copper |
92.3 |
36.8 |
16.0 |
51.4 |
80 |
-50-175 |
TS821 |
500g |
Grey |
120.5 |
35.1 |
22.0 |
77.5 |
89 |
-50-160 |
TS828 |
8kg |
Grey |
91.5 |
32.3 |
19.0 |
70.0 |
85 |
-50-150 |
TS836 |
500g |
Black |
98.5 |
47.9 |
18.0 |
68.0 |
80 |
-50-150 |
TS838 |
6kg |
Blue |
99.6 |
48.5 |
18.6 |
72.0 |
88 |
-50-150 |
TS851 |
114g |
Steel |
80.0 |
/ |
12.0 |
33.9 |
75 |
-50-121 |
TS856 |
500g |
Brown |
80.0 |
20.0 |
17.0 |
45.0 |
82 |
-50-150 |
TS858 |
85g |
Clear |
89.6 |
25.0 |
32.0 |
68.8 |
85 |
-50-120 |
Product |
Mix ratio（A：B） |
Working time100g（min） |
Cure speed(h) |
By weight |
By volume |
Machined or light load |
Load fud |
TS801 |
10:1 |
/ |
40 |
2 |
8 |
TS802 |
10:7 |
/ |
20 |
12 |
24 |
TS811 |
7:1 |
4:1 |
50 |
12 |
24 |
TS812 |
7:1 |
4:1 |
50 |
12 |
24 |
TS813 |
6:1 |
4.5:1 |
50 |
12 |
24 |
TS814 |
6:1 |
4:1 |
50 |
12 |
24 |
TS821 |
8:1 |
5:1 |
45 |
12 |
24 |
TS828 |
2:1 |
2:1 |
40 |
12 |
24 |
TS836 |
5:1 |
4:1 |
40 |
12 |
24 |
TS838 |
5:1 |
3.5:1 |
40 |
12 |
24 |
TS851 |
/ |
/ |
4 |
20 |
6 |
TS856 |
6:1 |
3.5:1 |
10 |
12 |
24 |
TS858 |
1:1 |
1:1 |
4 |
12 |
24 |
|
