EDW-200 Full Aotomatic Bathroom Tissue Kitchen Towel and Industrial Roll Rewinder

Detailed Product Description 1 Economic but high speed2 PLC control3 Touch LCD screen4 Electric braking5 Printing Embossing Parameter: Machine Speed: Max. 300M/min Machine Width: 2800 mm. Paper Width: 2750mm 1. Backstands 1) Sensor to control feeding the Jumbo roll 2) 3 cone wheel control web tension in manual. 3) 2 shafts with chucks for 3” core & a sleeve for any size. 4) Jumbo Roll diameter: Max. φ1500mm 5) Core diameter: φ76mm, 152mm 6) Two driving belt system for each unit 2. Embosser-lamination unit 1) Embossing pattern for Toilet roll and the simple pattern for Towel) as confirmed by the seller. 2) Heavy chrome coating. 3) Micro-adjustment of nips between the steel rolls. 4) Brand bearings for embossing rolls, printing rolls, and perforation rolls, etc. 5) Crown on the embossing rolls. 3. Rewinder 1) Core diameter manually adjustable, Min 42mm ~ 45mm Max. 2) Automatic diameter control for finished rolls, 90 ~ 110mm. 3) Safety guards, electrical interlock for all machines around, with signs in English. 4) PLC control (Mitsubishi) 5) Two set of steel to rubber embossing unit, controlled by pneumatic pump. 6) Emergency stop system, automatic counting unit, tail sealing inside unit 7) Automatic feeding core unit, core diameter adjustable 8) Perforation distance is between 120-280mm. for toilet rolls & towels. 9) Input the perforating sheet, diameter of toilet roll/kitchen towel by human-machine interface automatic. 4. Log Saw 1) Sensors across the infeed and inside to detect any jams or blade breakage. 2) Automatic grinding of the blade. 3) Adjustment to keep the position of blade or to change. 4) Automatic spray lubrication on blade. 5) brand grind wheels. 6) Strong safety guards for protection if blade breaks. 7) sensor for safety doors to stop the machine on emergency. 8) Straight & clean cut on the rolls. 9) Trimming for the end of logs: 30mm for the toilet rolls 30 ~ 35 mm. for the towels 10) Cutting length is adjustable, servo motor driving system, PLC control Cutting length for the finished toilet rolls: 98mm, + 1 ~ 2mm. Cutting length for the finished towel rolls: 220-270 mm. 11) Clamps 6~8 mm. adjustable on the diameter of the rolls. 12) 2 sensors to stop the saw if logs are not available. 5. Core Machine 1) Speed up to 25 M./Min. 2) Cold glue & hot glue. 3) Cutting length: adjustable. 4) Cut-off blade: high speed steel saw, clean cut. 5) One 50 mm. diameter mandrel, chrome coating One 46 mm. diameter mandrel, chrome coating 6) Parent rolls: Outside diameter: up to 1200mm. Core diameter: 76 mm. Paper width: 70 mm. 6. Printing Unit (optioned) 1) One circulation pump, including filter, min 50L tank, stainless steel. 2) Fountain roll (rubber over) Anilox roll Printing roll Backup roll 3) Micro-adjustment for all the above rolls. 4) Ink Pan 5) Drain to clean all the ink from the Pan. Automatic ink level in the ink pan. 7. Edge embossing unit (Optioned)