Laboratory stainless steel high-pressure reactor
Contact Info
- No.4285 Shendu Highway, Pujiang Town, 200000
- 胡工
- 18001633556
- 15000845544@163.com
Laboratory Stainless Steel High-Pressure Reactor
Product Introduction:
The laboratory stainless steel high-pressure reactor is equipped with an electric constant-speed stirring system, a condensation system, and a dropping system. The jacket of the reactor vessel needs to be connected to an external heating or cooling circulation device. While stirring the materials, circulating hot or cold solution is injected into the jacket to perform constant-temperature heating or cooling on the materials inside the vessel. When the materials are heated for reaction, the evaporation efficiency can be improved under vacuum conditions (a vacuum device needs to be connected). When the solvent vapor passes through the glass condensation coil, it cools into liquid (a cooling device needs to be connected), which can either reflux into the vessel or be recovered through the valve at the lower part of the reflux elbow. After the reaction is completed, the materials can be discharged from the side discharge port at the bottom of the vessel.
This series of products needs to be matched with a vacuum device, a high-temperature or low-temperature circulation device, etc., to form a complete system device.
Technical Parameters:
Product Name: 20L Three-Layer Jacketed Stainless Steel/Glass Reactor
Material of Inner Vessel: 316L Stainless Steel
Material of Non-Wetted Vessel: 304
Material of Vessel Lid: 316L
Reactor Design: Sealed reactor capable of withstanding vacuum and positive pressure
Wall Thickness of Inner Vessel Jacket: 5mm
Inner Vessel Jacket: Can use water bath or oil bath
Outer Vessel Jacket: Insulation layer
Jacket Inlet/Outlet: DN25 quick-connect joint
Designed Total Volume: 26L
Effective Volume: 20L
Vessel Structure: Upper and lower head structure
Vessel Lid Openings: Vacuum pressure gauge, sight glass with scraper, feed port with filter, feeding hopper, vacuum breaking respirator, spray ball, sight glass (with internal vessel lighting)
Inner Vessel Structure: Frame-type wall-scraping stirring, stirring power 400W, rotation speed 0-63r/min, scraper made of integral PTFE Class A scraper, speed regulated by Taiwan Delta frequency converter;
Vessel Lid Connection Method: Four-side locking buckle connection
Vessel Bottom Structure: Bottom-mounted disperser
Homogenizer: Bottom-mounted, power: 2.2KW, rotation speed: 0-3600r/min, bimetallic water-circulating mechanical seal
Temperature Measurement Component: PT100 temperature probe
Discharge Method: Tipping discharge
Vessel Lid Lifting Method: Electric hydraulic lifting
Lifter Material: 304
Lifting Column Material: 304
Product Features:
Highly modular design, various systems can be optionally installed
High-speed motor, long-life design, stable operation
Reasonable overall structure design, high-quality materials selected
Stepless speed regulation, with a shear line speed of 27m/s
Suitable for different working environments (sealed, open, atmospheric pressure, vacuum)
Overload protection, double insulation, ensuring your safety
Working head made of stainless steel, reusable, meets GMP hygiene standards
Modular design, any system can be flexibly combined. You can arbitrarily add other customized functions you need.
Product Parameters:
Model: | YK-20L |
Power Supply: | 220V/50/60Hz |
Stirring Volume: | 8~20L |
Processing Volume: | 10~20L |
Working Temperature: | 120°C (high temperature optional) |
Heating Method: | Water bath (or oil bath) circulation |
Vacuum Level: | -0.096Mpa (positive pressure optional) |
Processing Viscosity: | 70000CP (130000CP ultra-high viscosity optional) |
Mixer Power: | 180W |
Mixer Rotation Speed: | 0~200rpm (ultra-high rotation speed optional) |
Impeller Configuration: | Anchor-type wall-scraping stirring impeller |
Emulsification Homogenizer Power: | 1500W |
Emulsification Homogenizer Rotation Speed: | 300~6000rpm |
Emulsification Working Head Model: | 60DG |
Support Lifting Method: | Electric lifting |
Support Lifting Stroke: | 400mm |
Material-Contacting Material: | SUS316L stainless steel; scraper can be optionally made of PTFE or silicone |
Reactor Vessel Material: | Borosilicate glass jacketed container (SUS316L stainless steel container is also optional) |
Weight: | 70KG |
Packaging: | Wooden case |
| Chemicals/Reaction Equipment/Reactors | |
