2BV water ring vacuum pump

Introduction of 2BV water ring vacuum pump

SKA/2BV water ring vacuum pumps are suitable for extracting gas and water vapor, with an suction pressure up to 33 mbar absolute pressure (97% vacuum degree). When the vacuum pump works for a long time when the suction pressure is lower than 80 mbar, an anti-cavitation protection pipe should be connected to protect the pump, and the suction pressure can reach 10 mbar. When used as a compressor, its maximum pressure can reach 0.26 MPa (absolute pressure). It can be widely used in petrochemical, pharmaceutical, food, sugar manufacturing and other industries. Since the gas compression process is isothermal during operation, there is no danger when compressing and extracting flammable and explosive gases, so its application is more extensive. With excellent performance and many advantages, it will comprehensively replace the SK and 2SK series water ring vacuum pumps and W, WY, WL series reciprocating vacuum pumps with the same performance.

2. Structure of 2BV water ring vacuum pump

SKA/2BV water ring vacuum pump is composed of pump cover, pump body, disc, impeller, mechanical seal, motor and other parts. The air inlet pipe and exhaust pipe are connected to the pump cavity through the suction holes and exhaust holes on the disc installed on the pump cover. The shaft is installed eccentrically in the pump body, and the impeller is fixed on the shaft with a flat key. The total clearance of both end faces of the pump is adjusted by the gasket between the pump body and the disc. The clearance between the impeller and the disc on the pump cover is adjusted by the gasket between the disc and the pump body. The clearance between both end faces of the impeller and the disc on the pump cover determines the loss and its ultimate pressure during the flow of gas from the air inlet to the exhaust port in the pump cavity. Mechanical seal is adopted as the sealing method, which is installed between the impeller and the pump body. The clearance between the impeller and the pump body is determined by the mechanical seal. A disc is installed on the pump cover, which is provided with suction and exhaust holes and flexible exhaust valve plates. The function of the flexible valve plates is that when the gas pressure between the impeller blades reaches the exhaust pressure, the gas is discharged before the exhaust port, which reduces the power consumption caused by excessive gas pressure, thereby reducing power consumption.

3. Detailed features of 2BV water ring vacuum pump

The coaxial direct-coupled design of the motor and pump saves space and is easy to install.

Mechanical seal is adopted as standard configuration, which eliminates leakage and is easy to maintain. It runs smoothly with low noise.

Unified corrosion-resistant design: the bronze impeller improves the corrosion resistance of the pump, and the stainless steel material is more suitable for more demanding applications.

The unique flexible exhaust port design will not cause over-compression, ensuring that SKA works efficiently within its performance range.

4. Model parameters of 2BV water ring vacuum pump