ZX self-priming centrifugal pump, stainless steel chemical pump

I. Overview of ZX Self-Priming Centrifugal Pumps

The ZX horizontal clean water self-priming centrifugal pump is a type of self-priming pump connected to the pump body via a coupling by a motor. Its main feature is the self-priming function, eliminating the need for a foot valve in the pipeline. Before operation, it only needs to ensure that a certain amount of priming liquid is stored in the pump body, enabling the "one-time priming, lifelong self-priming" function. It has advantages such as compact structure, convenient operation, stable operation, easy maintenance, high efficiency, and long service life. The pump body and flow-passing components can be made of cast iron or various grades of stainless steel, and the motor can be equipped with a frequency conversion or explosion-proof motor. It is widely used in industrial sectors such as petroleum, chemical industry, metallurgy, machinery, chemical fiber, food, energy, and transportation, for urban water supply, and can also be used for agricultural irrigation and sprinkler irrigation. It is used to transport clean water or other liquids with physical and chemical properties similar to clean water, with a viscosity less than 5°E and a temperature below 80℃.

II. Structural Principle of ZX Self-Priming Centrifugal Pumps

The pump body of the ZX horizontal clean water self-priming centrifugal pump consists of a suction chamber, a liquid storage chamber, a volute chamber, a liquid return hole, a gas-liquid separation chamber, etc., adopting an axial liquid return structure. After the pump starts normally, the impeller sucks the liquid in the suction chamber and the air in the suction pipeline together, and they are fully mixed in the impeller. Under the action of centrifugal force, the liquid carrying gas flows to the outer edge of the volute chamber, forming a white foam belt with a certain thickness and a high-speed rotating liquid ring on the outer edge of the impeller. The gas-liquid mixture enters the gas-liquid separation chamber through the diffusion pipe. At this time, due to the sudden decrease in flow rate, the lighter gas is separated from the mixed liquid, and the gas continues to rise and discharge through the pump outlet. The degassed liquid returns to the liquid storage chamber and enters the impeller again through the return hole, mixing again with the gas sucked from the suction pipeline inside the impeller. Under the action of the high-speed rotating impeller, it flows to the outer edge of the impeller again. As this process repeats continuously, the air in the suction pipeline decreases until the air is exhausted, completing the self-priming process, and the pump then operates normally.

Some pump bearing bodies also have a cooling chamber at the bottom. When the temperature rise of the bearing exceeds 70℃ due to bearing heat, coolant can be injected through any coolant pipe joint at the cooling chamber for circulating cooling. The sealing mechanism inside the pump that prevents liquid leakage from high-pressure areas to low-pressure areas is composed of front and rear sealing rings. The front sealing ring is installed on the pump body, and the rear sealing ring is installed on the bearing body. When the sealing rings wear after long-term operation of the pump, affecting the pump's efficiency and self-priming performance, they should be replaced.

III. Product Details of ZX Self-Priming Centrifugal Pumps

IV. Applicable Working Conditions of ZX Self-Priming Centrifugal Pumps

① Applicable to urban environmental protection, construction, fire protection, chemical industry, pharmaceutical industry, dyeing, printing and dyeing, brewing, electric power, electroplating, paper making, petroleum, mining, equipment cooling, oil tanker unloading, etc.

② Applicable to clean water, seawater, chemical medium liquids with acidity and alkalinity, and general pasty slurries (medium viscosity ≤100 centipoise, solid content up to less than 30%).

③ Equipped with a swing nozzle, it can spray water into the air and disperse it into fine raindrops for spraying, making it a good tool for farms, nurseries, orchards, and tea gardens.

④ It can be matched with any type and specification of filter press, and is the most ideal matching pump for conveying slurry to the filter press for pressure filtration.

V. Model Parameters of ZX Self-Priming Centrifugal Pumps