Pumpu ya emulsification ya stainless steel ya high-shear intermittent
Contact Info
- Aderesi:Nmero 4285, Barabara ya Shen Du, Mugaaji wa Pujiang, Zip: 200000
- Uvugishe: 胡工
- Tel:18001633556
- Imeri:15000845544@163.com
Ibindi bicuruzwa
Gap gap high shear stainless steelemulsification pump
Product Introduction:
Gap gap high shear stainless steelemulsification pump is a high-performance dispersion emulsifier designed for bottom-entry containers. It mixes, emulsifies, and disperses free-flowing or viscous liquid media in batch operations. Using the rotor-stator principle, ECA is suitable for applications that cannot be completed with traditional stirring methods.
Product Features:
Suitable for special environments or hygiene requirements, installed at the bottom of containers, this bottom-mounted high-shear dispersion emulsifier allows materials to be discharged or circulated after processing. Traditional bottom-mounted installations cannot discharge materials separately after processing. ECA can provide two different circulation methods: internal and external.
ECA machines can avoid strong vortices and aeration, even when the tank has a very low filling level or the container is being stirred or dispersed
during emptying.
ECA machines have a simple, sturdy design. Three-phase motor, rotor drive shaft, and flange, equipped with a rotor combined with a compact unit using a cover. The standard ECA version is suitable for processing
temperatures up to 120 °C. The shaft seal uses a low-maintenance mechanical seal.
Product Parameters:
Model | Size | Processing Capacity | Motor Power @50Hz | Standard Speed @60Hz | Linear Speed @60Hz |
Liter L | KW | rpm | m/s | ||
ECA 60 | 60 | 2000 | 2.2 | 3600 | 27 |
ECA 115 | 115 | 5000 | 5.5 | 3600 | 18 |
ECA 150 | 150 | 8000 | 7.5 | 3600 | 25 |
ECA 220 | 220 | 10000 | 11 | 1800 | 18 |
ECA 250 | 250 | 16000 | 15 | 1800 | 21 |
ECA 280 | 280 | 22000 | 22 | 1800 | 24 |
ECA 300 | 300 | 30000 | 30 | 1800 | 25 |
1. The upper limit batch volume in the table is measured with water as the medium;
2. Batch volume depends on the viscosity and solid content of the material. If you encounter difficulties in model selection, please contact Yuedi Company by phone;
3. For special requirements such as high temperature, flammability, explosion risk, and corrosion, please confirm in writing before customization to avoid danger and loss;
4. Insert from the bottom of the container; no horizontal verticality requirement during installation;
5. The data in this table may not be accurate due to technical improvements or customization; please refer to the actual product. 
Product Applications:
Mainly suitable for equipment with small containers, where upper installation is not possible, or for applications requiring multiple emulsification pump equipment or small initial feeding, etc. It can also meet special working conditions such as vacuum and pressure requirements.
· Bottom-mounted dispersion emulsification pump uses well-selected motors, with excellent material selection, lower noise, and more stable operation, ensuring high quality of the whole machine
· No pollution to materials, it is an ideal choice for high-cleanliness requirements in pharmaceuticals, food, and cosmetics;
· Simple and reasonable structure, convenient for cleaning and disassembly, meeting GMP hygiene requirements;
· Suitable for normal pressure, closed, vacuum, and pressure working conditions;
· Bottom-mounted dispersion emulsification pump can choose mechanical seals: single-end, double-end
· Applicable temperature for bottom-mounted dispersion emulsification pump: ≤160℃
| Icyiciro cy'inganda: | Chemicals/Heat Transfer Equipment/Condensers |
|---|---|
| Icyiciro cy'ibicuruzwa: | |
| Ubwoko: | |
| Ibisobanuro: | |
| Ububiko: | |
| Inkomoko: |
