Dik üstden giren garyjy
Contact Info
- Salgysy:Puýjang şäheri, Şöwdu awan köçesi 4285-nji bölüji, Poçta indeksi: 200000
- Habarlaşmak: 胡工
- Tel:18001633556
- E-poçta:15000845544@163.com
Beýleki önümler
Vertical top-entrystirrer
I. Product Introduction
Vertical top-entrystirrer,chemical machinerystirrer,stainless steel mixing and stirring equipment can be applied in fields such as biopharmaceuticals, biochemistry, food, nanomaterials, coatings, adhesives, daily chemicals, printing and dyeing, petrochemicals, paper chemicals, etc. This digital-display electric stirrer is suitable for dispersion, stirring and other mixing processes of multi-viscosity systems in laboratories.
II.Add new functions to your laboratory
1. Digital display
2. Powerful, vertical shape, humanized design
Improved performance and technology based on the reliable YK120 series, with stable motor power
3. Two speed gears (high and low speed gears), ranging from 60-2000rpm.
4. Penetrating stirring paddle (only when fixed).
Equipment Parameters | Values |
Power supply | 220-240/100-115 V |
Motor power | 120W |
Stirring capacity (H₂O) | 20 L |
Motor input power | 70 W |
Motor output power | 35 W |
Speed display | LED LCD display |
Speed range | 60 - 2000 rpm |
Treatable viscosity | 10000CP |
Stirring shaft output power | 26 W |
Allowable continuous operation time | 100 % |
Stirring shaft torque | 150 Ncm |
At 60 rpm, stirring shaft torque (overload) | 300 Ncm |
At 100 rpm, stirring shaft torque | 150 Ncm |
At 1000 rpm, stirring shaft torque | 24 Ncm |
Speed range I (50 Hz) | 60 - 500 rpm |
Speed range II (50 Hz) | 240 - 2000 rpm |
Speed range I (60 Hz) | 72 - 600 rpm |
Speed range II (60 Hz) | 288 - 2400 rpm |
Speed control | Stepless |
Stirring paddle fixation | Rotary chuck |
Clamping diameter range of rotary chuck | 0.5-10mm |
Hollow shaft, inner diameter | 10.5 mm |
Hollow shaft (insertable when stopped) | Yes |
Bracket fixation | Extension arm chuck fixation |
Extension arm diameter | 13 mm |
Extension arm length | 160 mm |
Rated torque | 1.5 Nm |
Allowable ambient temperature | 5 - 40 °C |
Allowable relative humidity | 80 % |
DIN EN 60529 protection method | IP 20 |
External dimensions | 880×294×212 mm |
Weight | 3.1 kg |
III. Optional Configurations
1. Four-blade propeller type — standard stirring head, which makes the mixed medium flow axially from top to bottom, with low shear force.
2. Three-blade propeller type — makes the mixed medium flow axially from top to bottom, generating local shear force. Suitable for medium and high speed use.
3. Dissolution type — makes the mixed medium generate radial flow from both top and bottom; the strong turbulence and high shear force formed can crush particles in liquid. Suitable for medium and high speed use.
4. Centrifugal type — double blades open as speed increases, suitable for use in narrow-mouth containers. Stirring effect is similar to that of four-blade propeller type. Suitable for medium and high speed use.
5. Blade type — generates tangential flow, with low turbulence and good heat exchange performance, applied in occasions requiring gentle stirring of medium. Suitable for medium and low speed use.
6. Anchor type — generates tangential flow, with high shear rate formed at the edge, preventing the mixed medium from depositing on the container wall. Suitable for low speed use. It is an ideal stirring element for polymer reactions and dispersion of minerals in liquid, especially for high-viscosity fluids.
7. Other special paddles — various other types of paddles can be selected (to meet your special working conditions)
IV. Maintenance of Mechanical Stirrers:
·1. Bearings bear all the load of the machine, so lubrication is crucial for bearing life, which directly affects the service life and operation rate of the machine. Therefore, the injected lubricating oil is required to be clean and well-sealed. The main oil injection points of this machine are (1) rotating bearings, (2) rolling mill bearings, (3) all gears, (4) movable bearings and sliding surfaces.
·2. Newly installed wheel hoops are prone to loosening, so they need to be checked frequently.
·3. Pay attention to whether all parts of the machine are working normally.
·4. Check the wear degree of easily worn parts and replace worn parts in time.
·5. The bottom frame surface of the movable device should be kept free of dust and other substances, so that when the machine encounters unbreakable materials, the movable bearings can move on the bottom frame, avoiding serious accidents. 6. If the bearing oil temperature rises, stop the machine immediately to check the cause and eliminate it.
·7. If there is impact noise when the rotating gears are running, stop the machine immediately to check and eliminate the fault before restarting.
| Senagat kategoriýasy: | Chemicals/Heat Transfer Equipment/Other Heat Transfer Equipment |
|---|---|
| Önüm kategoriýasy: | |
| Brend: | |
| Aýratynlyklary: | |
| Ambar: | |
| Gelip çykyşy: |
