Explosion-proof Bromine Gas Alarm

Introduction
A gas alarm is an explosion-proof safety device capable of rapid, reliable, and stable continuous detection of gas concentration in industrial production. When the detected gas concentration reaches the preset alarm value, the alarm triggers and drives external equipment to alert on-site personnel to take necessary protective measures, thereby preventing combustion accidents caused by gas leaks.
Working Principle of Gas Alarm: The alarm, installed on-site and powered on, operates by converting detected gas leakage into corresponding voltage signals via sensors. These voltage signals are processed by the alarm, uploaded as data, and displayed on the screen. When the concentration reaches the set action value, the alarm activates and drives external devices.
A gas alarm is a fixed instrument that continuously monitors the concentration of oxygen or toxic, harmful, flammable, and explosive gases in the working environment.
The gas alarm employs a diffusion method, converting the gas concentration signal at the monitoring point into an electrical signal in real time. This signal is amplified and then processed by the CPU through AD sampling, temperature compensation, and intelligent calculation. If the measured value exceeds the set alarm concentration, an alarm signal is issued.
The gas alarm features a dual-chamber design, specialized imported sensors, and a modular sensor design for easier calibration and adjustment. It offers superior performance, high stability, multiple signal outputs, and convenient installation and maintenance, meeting the high reliability requirements of industrial sites.

Features
Ingenious structural design for extremely simple installation;
Flexible setting of upper and lower alarm points across the full range;
Explosion-proof design suitable for Zone 1 and 2 hazardous areas in industrial settings;
Optional LCD concentration display for real-time on-site concentration monitoring;
Optional dedicated explosion-proof audible and visual alarm for on-site alerts;
Meets any range between 1-99999 and all gas detection needs of customers;
Two sets of normally open passive contact outputs for controlling fans or solenoid valve AC contactors;
Elegant power supply design with pure SMT component mounting process ensuring stable product performance;
Sensors use imported gas-sensitive components with high accuracy, long lifespan, minimal zero drift, fast response time, suitability for long-term continuous operation, compact size, easy operation, and good anti-poisoning performance;
Allows adjustment of alarm points, zero points, and target point calibration for the transmitter via the controller without opening the cover;
Suitable for detecting dozens of gases and displaying gas names; Gas unit names: ppm, LEL%, VOL%, mg/m³;
International standard (4–20)mA signal can be directly connected to the factory DCS system; RS485 digital signal can connect to the factory host computer.