Bathroom Leak-Proof Microcrystalline Membrane Waterproof Coating (No Tile Removal Required)

After the no-smashing waterproof material dissolves in water, it uses water as a carrier to quickly penetrate all gaps that water can reach, immediately triggering an expansion and solidification reaction to form an acid-resistant, corrosion-resistant, highly flexible, 100% impermeable colloid. This tightly bonds the underground concrete together, further filling all leakage gaps, thereby achieving the purpose of plugging leaks and stopping seepage.

Product Usage Method:

1. Use a plastic bag to wrap a wet cloth or balloon to block the floor drain to prevent the material from flowing into the drainpipe.

2. Take approximately 15-20 kilograms of tap water, pour products A1 and A2 into the bucket in sequence and stir to dissolve, then pour material B into the bucket and stir until dissolved.

3. Pour the mixed material onto the ground and continuously sweep from low to high areas with a broom. (Sweep approximately every 10 minutes.)

4. After about 1 hour, the remaining liquid on the ground will solidify into a gel-like solid. Clean it up, and the construction is complete. (Do not step directly on the solidified colloid.)

Common Repair Methods for Bathroom Leaks:
1. Smash the tiles and redo the waterproofing (labor-intensive, time-consuming, costly, and takes about a week to complete).
2. Surface treatment and filling tile gaps (temporary effect, addresses symptoms but not the root cause).
3. Inject grout from downstairs or perform localized treatment (only plugs the leaking gaps but cannot prevent water seepage from other areas).

4. This waterproof material is a highly concentrated raw material. After dilution with water, it performs a comprehensive repair, forming a dense, integrated waterproof layer with the cement and sand beneath the tiles. It is cost-effective, convenient, and thoroughly fixes leaks.