Exterior Transparent Waterproof Adhesive

Exterior Wall Waterproof Transparent Adhesive Product Introduction

1. Colorless, transparent, will not damage the original wall decoration effect after application, and will not yellow or collect dust;

　　2. Heat resistant, UV resistant, ozone resistant, acid and alkali resistant, with a wide range of adaptability to temperature; blended with synthetic rubber emulsion modifier, surfactant;

　　3. The coating film has good film-forming properties, is soft and tough, and can withstand the stress caused by base layer deformation and cracking;

　　4. Uses water as the dispersion medium, non-flammable, non-toxic, odorless, does not pollute the environment, and is an environmentally friendly product;

　　5. Cold application, safe operation, convenient construction, can be directly sprayed, painted, brushed, or scraped onto the wall;

　　6. The film has microporous breathability, suitable for the thermal evaporation of humid climates in the south, and does not blister;

　　7. Low usage, cost-effective.

Scope of Application

1. Waterproof repair for leakage on the exterior walls of various buildings;

　　2. Applied to waterproof treatment at the interfaces of various decorative materials;

3. Waterproof and moisture-proof treatment on the surfaces of various interior and exterior wall decorative materials.

Construction Requirements

　　1. Base surface cleaning: use cleaner, steel wire brush, cloth to clean the wall base as thoroughly as possible, but try not to damage the original surface gloss;

2. Use a brush to apply the transparent waterproof adhesive to the wall and the joints of decorative tiles, applying with special care;

3. Generally, apply 2-3 coats. Ensure the previous coat is dry and not sticky before applying the next, and apply in crisscross directions;

4. If the viscosity is too high during construction, dilute with clean water, but use as little water as possible.

Technical Indicators