KT-1 Low-Frequency Neuromuscular Stimulator

KT-1 Low-Frequency Neuromuscular Stimulator Operating Conditions

1、Ambient temperature: 5℃ to 40℃.

2、Relative humidity: ≤80%.

3、Atmospheric pressure: 500hPa to 1060hPa.

4、Operating voltage: AC 220V±22V, 50Hz±1Hz.

5、Input power: 20VA+3VA.

KT-1 Low-Frequency Neuromuscular Stimulator Main Technical Parameters

* 1、Pulse frequency: 0.5Hz to 15Hz continuously adjustable (under 500Ω load resistance), error: ±15% .

* 2、Pulse width: 0.4~10ms (under 500Ω load resistance), error: ±30%.

3、Output current: Maximum output current RMS not exceeding 80mA (under 500Ω load resistance).

4、Output amplitude adjustment: Each increment not exceeding 1mA or 1A discrete change, minimum output increment not exceeding 2% of maximum output.

* 5、Output mode: Continuous, intermittent.

* 6、Output channels: Four independent output channels.

* 7、Treatment time: 5—60 minutes (12 levels, graduation value 5min).

* 8、Digital display: Pulse frequency, pulse width, treatment time.

9、Charge per pulse: When the electrotherapy device output amplitude is at maximum, the charge per pulse should be greater than 7 μC.

10、Energy per single pulse: When output pulse width is less than 0.1s, the maximum energy per single pulse does not exceed 300mJ.

11、Peak open-circuit output voltage: Not exceeding 500V.

12、Safety type: Class I BF type.

13、Duty cycle: Intermittent loading continuous operation.

14、Dimensions: 490mm×400mm×200mm.

15、Weight: 11Kg