240L (11KG) Trash Can

1. Rated capacity: 240 liters (11KG), the deviation between actual capacity and rated capacity should be within 0~5% positive deviation. Dimensions: Length 720mm * Width 560mm * Height 1000mm ±20 (excluding lid), height including lid: 1070mm. Thickness requirements: Lid ≥4mm, bottom ≥5mm, wall thickness ≥6.5mm. Barrel body weight ≥11.0kg, lid weight ≥1.2kg, total weight with lid and axle ≥14.9KG. Solid axle: 1.35Kg, hollow axle: 0.3Kg, wheels ≥2.4Kg. Material: New high-density polyethylene (HDPE).

2. Product requirements:

(1) Appearance performance: Smooth and flat surface, free from bubbles, ripples, impurities, sand holes, black spots, cracks. The color of the barrel body and lid should be consistent for the same batch of plastic garbage bins, with no obvious deformation at the closure.

(2) The product is made from new high-density polyethylene (HDPE) material through one-time injection molding, with high-quality reinforcement and UV inhibitors added. The pigment content is 5% to ensure bright color and long-lasting fade resistance. The aging resistance of the barrel should meet the requirements of GB/T 16422.2, with sufficient mechanical strength and good impact toughness.

(3) The barrel body features longitudinal concave surfaces on all four sides, enhancing toughness, load-bearing capacity, and stability. Additionally, each top outer edge has four longitudinal reinforcing ribs with a thickness of no less than ≥8mm.

(4) The bottom of the rear side of the barrel has an anti-slip design.

(5) The bottom has 12 wear-resistant pins, with a mesh design around the perimeter and a concave-convex shape in the center, measuring 225mm*200mm.

(6) The recessed dimensions on both sides of the barrel below the reinforcing ribs: 270mm*850mm. The front and rear recesses extend from top to bottom, with recessed dimensions below the reinforcing ribs: 270mm*850mm.

(7) The barrel body has 12 reinforcing ribs around its perimeter.

(8) The bottom of the lid has four reinforcing designs; the bottom of the lid has a circumferential reinforcing rib.

(9) The front opening of the barrel must be compatible with the tipping mechanism of side-loading garbage trucks. The tipping area is thickened, with a depth of ≥40mm at the hitch point, ensuring secure engagement with the vehicle’s lifting frame and reducing the risk of detachment during operation. The tipping area is reinforced with ribs to prevent loosening, deformation, or breakage during the tipping process.

(10) Rubber wheels are connected to the axle using a direct insertion anti-theft and anti-retreat mechanism. The axle is made of galvanized solid steel and treated for corrosion resistance. The wheel hub and rim are made of high-density polyethylene, with a solid hub design. The hub diameter is ≥190mm, and the wheel width is ≥25mm, with each wheel capable of bearing over 50KG.

(11) Product compliance standard: "Chinese Urban Construction Industry Standard—General Technical Conditions for Plastic Garbage Bins," standard number CJ/T 280—2008.