240L (9.5KG) Trash Can

1. Rated capacity: 240 liters (9.5KG). The deviation between actual capacity and rated capacity should be within 0~5% positive deviation. Dimensions: Length 720mm * Width 560mm * Height 1000mm (without lid), height with lid: 1070mm. Thickness requirements: Lid ≥4mm, bottom ≥5mm, wall thickness ≥6mm. Barrel body weight ≥9.5kg, lid weight ≥1.2kg, total weight with lid and axle ≥13.43KG. Solid axle: 1.35Kg, hollow axle: 0.30Kg, wheels ≥2.4Kg. Material: New high-density polyethylene (HDPE).

2. Product Requirements:

(1) Appearance performance: Smooth and flat surface, free from bubbles, ripples, impurities, sand holes, black spots, or cracks. The color of the plastic garbage bin body and lid should be consistent within the same batch, and there should be no noticeable deformation in the closing parts.

(2) The product is manufactured using high-density polyethylene (HDPE) new material through one-time injection molding. High-quality reinforcement and anti-UV agents are added, with a pigment content of 5%, ensuring vibrant color and long-lasting fade resistance. The aging resistance of the barrel should comply with GB/T 16422.2 requirements, with sufficient mechanical strength and good impact toughness.

(3) The barrel body features longitudinal concave surfaces on all four sides, enhancing toughness, load-bearing capacity, and stability. Additionally, the top outer edge of each side has four longitudinal reinforcement ribs, with a rib thickness of no less than ≥8mm.

(4) The bottom of the rear side of the barrel body has an anti-slip design.

(5) The bottom is equipped with 12 wear-resistant pins, featuring a mesh design around the perimeter and a concave-convex shape in the center, with dimensions of 225mm*200mm.

(6) The recessed dimensions on both sides of the barrel body below the reinforcement ribs: 270mm*850mm. The front and rear recesses extend from top to bottom, with recessed dimensions below the reinforcement ribs: 270mm*850mm.

(7) The barrel body has 12 reinforcement ribs around its perimeter.

(8) The bottom of the lid has four reinforcement designs; the bottom of the lid features a circumferential reinforcement rib.

(9) The front opening of the barrel must be compatible with the tipping mechanism of side-loading garbage trucks. The tipping part is thickened, with a depth of ≥40mm at the hanger point, ensuring secure compatibility with the vehicle's lifting frame and reducing the risk of detachment during operation. The tipping part is reinforced with ribs to prevent loosening, deformation, or breakage during the tipping process.

(10) Rubber wheels are connected to the bottom axle using a direct insertion anti-theft and anti-retreat mechanism. The axle is made of galvanized solid steel and treated for corrosion resistance. The wheel hub and rim are made of high-density polyethylene, with a solid wheel hub design. The wheel hub diameter is ≥190mm, and the wheel face width is ≥25mm, with each wheel capable of bearing a load of 50KG or more.

(11) Product compliance standard: "Chinese Urban Construction Industry Standard—General Technical Conditions for Plastic Garbage Bins," standard number CJ/T 280—2008.