Vibration Test Cast Iron Workbench

Cast Iron Testing Platform: The Precision Testing Tool of Modern Industry
As a crucial foundational equipment in the industrial sector, the selection of a cast iron testing platform directly impacts the accuracy of product quality inspection and production efficiency. Faced with a wide variety of cast iron testing platforms on the market, how to scientifically choose one has become a focal point for corporate procurement personnel and technical staff. Below, we systematically analyze the key points for selecting a cast iron testing platform from dimensions such as material properties, structural design, accuracy grade, and brand service.
1. Priority Consideration of Material and Casting Process
The core of a cast iron testing platform lies in the stability of its material. The platform must be made of HT200 or HT250 high-strength cast iron, with a tensile strength of at least 200 MPa and hardness controlled within the range of HB170-240. The casting process should employ resin sand molding to ensure a dense internal structure free of sand holes. For example, a procurement case from an industrial enterprise showed that platforms subjected to three tempering treatments exhibited a 40% increase in stress resistance compared to those made with conventional processes, with long-term deformation of less than 0.02 mm/m. Special attention must be paid to whether the supplier provides material inspection reports, including spectral analysis data and metallographic structure photos.

2. Matching Principles of Structural Design and Load-Bearing Capacity
The platform structure should be selected based on testing requirements, opting for either a box-type ribbed plate or a single-surround design. For inspecting heavy workpieces weighing over 5 tons, it is recommended to choose a reinforced rib structure with a grid density of at least 150×150 mm, and the worktable thickness should not be less than 30 mm. Measured data from an automotive parts manufacturer indicated that a 2m×4m platform with a double-layer staggered rib structure reduced deflection under concentrated loads by 35% compared to a single-layer structure. Additionally, attention should be paid to the rational distribution of anchor bolt holes, generally requiring no fewer than 2 adjustment support points per square meter.
3. Matching Accuracy Grades
According to the GB/T22095-2008 standard, cast iron platforms are divided into four accuracy grades: 0, 1, 2, and 3. For measurement scenarios, a Grade 0 platform should be selected, with a flatness tolerance of (1.5 + 0.02L) μm, where L is the diagonal length (mm). It is worth noting that test data from a metrology institute showed that for every 1°C change in ambient temperature, a 2m×3m platform experiences approximately 0.003 mm of thermal deformation. Therefore, a constant-temperature workshop is a necessary condition for high-precision testing. For rough processing scenarios such as welding inspection, a Grade 2 platform is sufficient, reducing procurement costs by over 30%.
4. Surface Treatment and Special Process Requirements
The working surface should undergo manual scraping at least twice, with point density reaching 20-25 points within a 25×25 mm² area. For humid environments requiring rust prevention, it is advisable to choose a platform with hard chrome plating, with salt spray test endurance of no less than 96 hours. Comparative tests by a shipbuilding enterprise found that platforms with special anti-permeability treatment had a service life extended by three times in coastal environments. For magnetic component testing, it is essential to require that the residual magnetic induction intensity be less than 0.5 μT.
In summary, the selection of a cast iron testing platform requires establishing a comprehensive evaluation system that not only meets current testing needs but also allows room for technological upgrades. It is recommended to form a selection team involving quality, process, and procurement personnel to make scientific decisions through sample testing and peer case studies. The chosen platform should be a solution that balances accuracy, lifespan, and cost, rather than solely pursuing a single indicator.
Weiyue Machinery, Ms. Xie, 15350773479