First-grade white fused alumina 60 mesh white aluminum oxide abrasive
Contact Info
- Add:Songshan Road, Zip: 450000
- Contact: 陈经理
- Tel:13526538098
- Email:panchen@hxabrasive.com
Other Products
Grade 1 White Fused Alumina 60 Grit White Aluminum Oxide Abrasive
White fused alumina abrasive is a type of abrasive with over 99% content of electrically fused aluminum oxide. It can not only be used for producing abrasive tools but is also widely applied in sandblasting industrial components made of metal, stainless steel, glass, aluminum alloys, etc. It increases the surface roughness of workpieces requiring sandblasting, providing a foundation for subsequent painting and enhancing the adhesion of coatings.
Chemical Composition of White Fused Alumina (Typical Indicators):
White Fused Alumina Grit | White Fused Alumina Micro Powder | White Fused Alumina Grain | White Fused Alumina Fine Powder | |
|---|---|---|---|---|
AL2O3 | 99.53% | 99.27% | 99.59% | 99.28% |
SiO2 | 0.13% | 0.14% | 0.01% | 0.14% |
NA2O | 0.23% | 0.28% | 0.24% | 0.27% |
Fe2O3 | 0.07% | 0.06% | 0.02% | 0.05% |
CaO | 0.03% | 0.05% | 0.02% | 0.04% |
Physical Properties of White Fused Alumina Abrasive:
Color | White |
|---|---|
Mohs Hardness | 9.0 |
Knoop Hardness | 2000 - 2200 Kg/mm2 |
Service Temperature | 1900 ℃ |
Melting Point | 2250 ℃ |
Specific Gravity | 3.95g/cm3 |
Bulk Density | 3.6g/cm3 |
Apparent Density | 1.55-1.95 g/cm3 |
Specific Heat | 0.26 cal/g. ℃(20-90℃) |
Thermal Conductivity | 6.16W/（m·K）（1000℃） |
Linear Expansion Coefficient | 8.0×10-6/℃（200-1000℃） |
Refractive Index | e=1.760 w=1.768 |
Chemical Reaction | Acidic substances: Slightly corroded in aqua regia and hydrofluoric acid; Alkaline substances: Only slightly reacts with strong alkaline hot solutions |
Crystal Form | Trigonal System |
Product Models of White Fused Alumina:
Grain | 0-1mm, 1-3mm, 3-5mm, 5-8mm |
|---|---|
Fine Powder | 100#-0, 200#-0, 270#-0, 325#-0 |
Grit | 8# 10# 12# 16# 20# 22# 24# 30# 36# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# |
Micro Powder | W Standard: W63 W50 W40 W28 W20 W14 W10 W7 W5 W3.5 W2.5 W1.5 W0.5 |
European Standard: F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500 F2000 | |
JIS Japanese Standard: 240# 280# 320# 360# 400# 500# 600# 700# 800# 1000# 1200# 1500# 2000# 2500# 3000# 4000# 6000# 8000# 10000# |
Main Performance Characteristics of White Fused Alumina:
1. High purity of aluminum oxide (over 99%), resulting in high hardness, strong grinding power, and high grinding efficiency.
2. The white fused alumina grit produced by our company is made from grade 1 block material from fixed furnaces, crushed and sieved, offering better toughness than that from tilting furnaces. As a raw material for abrasive tools, it enhances product sharpness, and as a sandblasting material, it offers better durability.
3. White fused alumina has uniform particle size. Compared to consumables like natural emery and glass beads, it is less likely to clog nozzles and has high particle consistency.
4. White fused alumina grain and fine powder have low sodium content (within 0.3%), making them suitable as refractory castables and aggregates, improving the erosion and corrosion resistance of refractory materials.
5. White fused alumina micro powder is produced through a water-based process, resulting in more uniform particle size, no large particles, and no scratching of workpiece surfaces.
6. White fused alumina can also be directly used in grinding, polishing, surface treatment, sandblasting for rust removal, etc. It is applicable for both dry and wet sandblasting, surface roughening and polishing, surface treatment and passivation before coating, etc.
7. Electrically fused aluminum oxide sand has strong wear resistance, making it suitable as an additive material for wear-resistant products.
8. Strong chemical stability, good resistance to acids and alkalis, and insoluble in water.
9. Strong thermal stability, with wear resistance unaffected at high temperatures.
10. Produced through a special ball milling process, it has low metal residue, high whiteness, and does not affect the color of coatings and other products.
11. White fused alumina has high refractory temperature, resistance to acid and alkali corrosion, and good thermal properties. It is not only used for grinding and polishing but also as an additive material for coatings, ceramics, rubber, plastics, and composites.
| Industry Category | Hardware |
|---|---|
| Product Category | |
| Brand: | 海旭磨料 |
| Spec: | F60 |
| Stock: | 200 |
| Manufacturer: | |
| Origin: | China / Henan / Zhengzhoushi |
