Butterfly valve with clamp type signal ZSXF

I. Function and Features of Wafer-type Signal Butterfly Valve ZSXF:

1. The fire signal butterfly valve is a butterfly valve capable of remotely transmitting electrical signals and displaying the valve's open/close status. It is suitable for flow cutoff in fire water supply systems and monitoring of valve opening and closing status.

2. The fire signal butterfly valve is an improvement on the original (traditional) worm gear transmission type. This signal butterfly valve is lightweight and aesthetically pleasing, with no specified water flow direction (i.e., non-directional). Both flange ends of the valve body are designed with sealing surfaces, making installation more convenient for users. The fire signal butterfly valve clearly indicates the valve's switch status, providing an intuitive, clear, and reliable reflection of its working state in fire protection systems, making it widely and extensively applicable in such systems.

3. The explosion-proof fire signal butterfly valve is widely used in various pipelines in flammable and explosive environments, especially in fire protection pipelines.

II. Product Model, Specifications, and Technical Parameters of Wafer-type Signal Butterfly Valve ZSXF:

1. Technical Parameters: Working Medium: Water           Rated Working Pressure: 1.6MPa

Working Temperature: 4°C-75°C    Seal Test Pressure: 3.2MPa

Electrical Performance Parameters: DC24V, 0.5A

III. Installation, Maintenance, and Care of Wafer-type Signal Butterfly Valve ZSXF:

1. During installation, the connecting ports of the pipe sections on both sides must be concentric with the signal valve. Any slight deviation between the signal valve and the pipe connection may affect the opening and closing function of the fire signal valve.

2. When operating the worm gear-type fire signal valve, excessive force should not be applied, as it may damage the worm gear teeth.

3. No additional flange sealing gasket is required during the connection and installation of this valve.

4. During handling and installation, care must be taken to protect the rubber sealing surfaces of both flanges, the inner cavity sealing surfaces, the circumferential sealing surfaces of the butterfly disc, and the micro switch. Avoid scratches, abrasions, cracks, or any other damage that may affect sealing performance and the normal operation of the electrical signal system.

5. After installation, before conducting a seal pressure test on the pipeline, fully open the valve butterfly disc. Flush the inner cavity of the pipeline clean; otherwise, the butterfly valve may not close tightly.