Pure Water Reverse Osmosis Membrane Scale Inhibitor

Xingtai Food Factory Pure Water Reverse Osmosis Membrane Scale Inhibitor MPS310Quality Assurance. MPS310 reverse osmosis membrane scale inhibitor is suitable for RO equipment in food factories. When added to the feed water, it effectively prevents scaling factors from depositing on the membrane surface, purifies water quality, and with long-term use, it helps increase the water output and quality of membrane equipment, reducing the cost of membrane replacement, saving time and effort for factory production. Xingtai Food Factory Pure Water MPS310Reverse Osmosis Membrane Scale InhibitorQuality Assurance. Binshengxiang has 20 years of rich production technology experience, offering high-quality products at low prices, making it one of the premium products in water treatment.

Below is an introduction to the chemically produced MPS310 reverse osmosis membrane scale inhibitor:

MPS310 Reverse Osmosis Membrane Scale Inhibitor

MPS310 RO Membrane Scale Inhibitor

Usage Description: MPS310 reverse osmosis membrane scale inhibitor is a highly effective scale inhibition dispersant specifically developed for reverse osmosis (RO) systems with feed water high in calcium, magnesium, sulfate, and silica content. This product has an extremely high calcium solubility, stabilizing calcium ions on the concentrate side up to 40,000 mg/l, sulfate content above 10,000 mg/l, and silica content equivalent to 400 mg/l at 25°C and pH 8.0. It is particularly suitable for wastewater reuse and harsh feed water conditions. It can be used with reverse osmosis membranes and TFC membranes from Dow Chemical (Dow Filmtec), Hydranautics, as well as domestic brands, and nanofiltration membrane elements.

Product Features

1. Can control water quality high in calcium, magnesium, sulfate, and silica

2. Effectively disperses blocking particles to prevent contamination

3. Reduced dosage, making it a cost-effective solution for scale control

4. Scale inhibition effect is not affected by Fe3+ in water

5. Suitable for various types of membrane materials

6. Enables higher system recovery rates

Usage Requirements

Dosage: Continuously add MPS310 reverse osmosis membrane scale inhibitor to the feed water before it enters the membrane system. The recommended dosage is 5-15 mg/l in the feed water. Specific amounts may vary depending on water chemistry, membrane type, and system operating parameters (such as recovery rate, temperature, and pressure). The exact dosage should be calculated using supplier software.

Dilution: MPS310 reverse osmosis membrane scale inhibitor should be added continuously. It is recommended to add the concentrate directly at the maximum frequency of the dosing pump. Alternatively, it can be diluted with RO product water or desalinated water, with a dilution factor not exceeding 10.

Physical and Chemical Properties

Packaging and Storage: High-strength plastic drums, 25 kg/drum, shelf life of 2 years

Precautions: When handling this product, pay attention to labor protection. Avoid contact with skin and eyes. In case of contact, rinse thoroughly with plenty of water.

Xingtai Food Factory Pure Water Reverse Osmosis Membrane Scale Inhibitor Quality Assurance. Binshengxiang Chemical specializes in the production of reverse osmosis membrane scale inhibitors for 20 years. The company has extensive production technology experience and can provide customers with free samples, free water sample testing, free solution design, wholesale, retail, customization, OEM, contract manufacturing, quotations, and long-term technical support. Binshengxiang Chemical looks forward to cooperating with you.