Cable Online Fault Warning and Location System WRS-CBS11X Series - Volsun Electric

The WRS-CBS11X series cable online fault warning and positioning system developed by our company conducts real-time online monitoring of cable operating conditions, collects transient traveling waves and steady-state components during cable operation, analyzes and processes them to predict cable operating conditions, provides alarm and fault diagnosis information for faulty cables, monitors the insulation status of cables, issues warnings for permanent faults, and achieves fault location and fault line selection. It provides a reliable basis for condition-based maintenance, making it possible to transition cable lines from traditional periodic maintenance to condition-based maintenance. This not only reduces planned power outage time but also minimizes the damage caused by high-voltage preventive tests on cables.
Features:

Fault Location: The system utilizes voltage traveling wave and current traveling wave fault location technology to achieve fault point location, with a fault location accuracy of up to 2.12m.
Fault Line Selection: The system monitors the operating status of each cable in real time and performs cable loop selection for main insulation faults.
System Cloud Service: Provides sufficient user space for each user, allowing access to on-site system monitoring via a browser anytime and anywhere. Historical data is permanently stored for easy review.
Local Functionality: The system backend is installed in the main station, configured with a primary system diagram, enabling fault warning, line selection, and location. The system diagram flashes for faulty lines, with pop-up alarms, sound alerts, and WeChat mini-program notifications.
Electronic Duty: Enables unmanned operation, with alarm information and working status pushed to relevant personnel via WeChat mini-program.
Remote Technical Support: 7*24-hour remote service, providing auxiliary analysis of fault waveforms and remote system program upgrades.
Historical Storage: Real-time information storage, allowing historical data queries and more.
Warning Methods: Yellow Warning: When an abnormality occurs in the cable, the device immediately captures the waveform and displays a yellow warning. This indicates arcing in the phase cable, requiring close attention. The discharge amount for instantaneous arcing is approximately 3,000 microcoulombs.
Orange Warning: When dozens of waveforms are triggered daily, the system issues an orange warning. Users should arrange maintenance as soon as possible. The discharge amount for instantaneous arcing is approximately 3,000–5,000 microcoulombs.
Red Warning: Trigger frequency increases rapidly, and the cable is likely to fail soon (within 24 hours). The system enters a red warning state, and users should immediately conduct a power outage for maintenance. The discharge amount for instantaneous arcing is approximately 5,000–8,000 microcoulombs. Additionally, if the cable suffers irreversible external damage (e.g., mechanical damage such as being cut), the system directly reports a red warning for the faulty line.

Technical Parameters:
Current Signal Sampling Frequency: 50MHz, 8 channels
Voltage Signal Sampling Frequency: 200kHz × 5 channels
System Positioning Accuracy: 2.12m
Fault Line Selection Accuracy: ≥99%
Single-End Fault Location Range for Current: ≤5km
Test Blind Zone: ≤5m
Cloud Communication Method: Wireless 4G communication
System Device Communication Method: RJ45
System Expansion: Supports up to 253 monitoring units in a network
System Power Supply: AC/DC 220V ±20%
System Operating Temperature: -25°C to +70°C
System Online Safe Operation: >80,000 hours

(The table lists only some specifications; other capacities can be customized as needed.)

Keywords: Cable Fault Location System, Cable Warning System