Mixed Gas Combustion Calorific Value Analyzer

Mixed Gas Combustion Calorific Value Analyzer

Mixed Gas Combustion Calorific Value Analyzer Gaseous sample collection and processing: First, an appropriate amount of sample needs to be collected from the fuel and properly processed to ensure the representativeness and accuracy of the sample.

2. Gas Chromatograph Instrument Preparation and Calibration: Perform necessary preparation and calibration of the gas chromatograph, including adjusting carrier gas flow rate and setting detector parameters.

3. Sample Injection: Inject the processed sample into the gas chromatograph for separation and detection.

4. Data Analysis: Record the signal data generated by the detector and perform necessary processing and analysis to determine the content and calorific value of each component.

Mixed Gas Combustion Calorific Value Analyzer

Automatic Natural Gas Analyzer Detection Parameters:

1. Carrier Gas: High-purity hydrogen (purity ≥ 99.995%)

2. Built-in calorific value software automatically calculates component content, high calorific value, low calorific value, density, relative density, Wobbe index, combustion potential

3. TCD sensitivity S ≥ 3500 mv.ml/mg (benzene), noise ≤ 0.02 mv  

4. Range: 0-100%

5. Resolution: 0.001%

6. Detection error: ≤ ±0.1% F.S

7. Qualitative error: ≤ 0.02 min

8. Stabilization time: ≤ 30 min

9. Built-in air pump: Automatic

10. Flow rate requirement: ≤ 5000 L/min

11. Flow display: Electronic flow display

12. Carrier gas tube: Hard tube interface - outer diameter Φ4, inner diameter Φ2, high-quality PU tube

13. Sampling tube: Hard tube interface, outer diameter Φ4, inner diameter Φ2, high-quality PU

14. Inlet gas requirement: Dust-free, water-free, oil-free

15. Built-in injection valve: Automatic injection, automatic reset (module controlled)

16. Sampling device: Special tanker sampling equipment

17. Sampling tool: Sampling bag

18. Instrument dimensions: 470mm × 360mm × 400mm (L*D*H)

19. Operating environment: -10℃ to 60℃; Humidity: 10% to 85%

20. Input power: AC220V, DC12V, DC24V  

21. Total weight: 25 KG (approx.)