Sponge Packing Machine

Installation Notes

1. Place the machine on a level surface without shaking, then add approximately 60 kilograms of 68# or 46# hydraulic oil.

2. The motor of this machine is 3-phase—380V—50HZ. Please verify whether the local voltage matches the machine's requirements. After connecting the wires (wire size should correspond to the motor's power), turn on the power and check that the motor rotates clockwise (as indicated by the arrow). If the direction is incorrect, adjust the connection of any two live wires.

Maintenance

This machine should be operated and maintained by designated personnel. After each workday, turn off the main power, clean debris around the machine, and remove any foreign objects inside the machine.

Regularly check whether screws at various parts of the machine are loose. On new machines, parts prone to loosening include: the small flange screws on the central shaft and the large screws inside the pressure plate. These should be tightened periodically.

Safety Precautions

Before starting the packing process, first check that all doors are properly closed, the door lock is fully engaged, and the blade lock is secured. Do not proceed with packing if any of these parts are not properly fastened to avoid accidents.

During machine operation, stand beside the machine and avoid extending your head, hands, or any part of your body into the door area to prevent crushing injuries.