Heat conduction oil hot oil pump
Contact Info
- Add:North Section of Industrial Road, Yutai County Economic Development Zone, Zip:
- Contact: 吴经理
- Tel:13012608150
- Email:15314489@qq.com
Other Products
1. Introduction to LQRY Heat-conducting Oil Pump
The LQRY air-cooled heat-conducting oil pump adopts an self-heat dissipation system, which does not need water to cool the pump body, simplifying the structure, reducing the volume, lowering the operating cost and ensuring reliable performance. Therefore, it is widely used in various occasions for conveying high-temperature liquids. Since the heat-conducting oil pump is used to transport liquids with relatively high temperatures, the sealing elements and bearings have very high requirements for corrosion resistance and high temperature resistance. Both mechanical seals and packing seals have good hot-state adaptability, and the mechanical seals are made of hard alloy materials. The parts of the heat-conducting oil pump produced by our company have undergone high-temperature heat treatment. It can operate stably for a long time without leakage in hot state, has no additional cooling system and is reliable in use. It has been widely used in heat carrier heating systems, and has entered various industrial fields such as petroleum, chemical industry, rubber, plastics, pharmaceuticals, textiles, printing and dyeing, road construction, food and so on. It is mainly used to transport weakly corrosive high-temperature liquids with temperature ≤ 370℃ and without solid particles.
2. Structural Performance of LQRY Heat-conducting Oil Pump
3. Characteristics of LQRY Heat-conducting Oil Pump
The basic structural form of the LQRY air-cooled heat-conducting oil pump is a single-stage single-suction cantilever foot support structure. The inlet of the pump is axially suctioned, and the outlet is vertically upward at the center, which is installed on the base together with the motor. The support adopts a double-end ball bearing support structure, the front end is lubricated with lubricating oil, and the rear end is lubricated with grease. There is an oil guide pipe in the middle, which is used to observe the sealing condition and recover the heat-conducting oil at any time. It adopts a self-heat dissipation structure, which changes the traditional water cooling structure, making the structure simple, small in size, saving operating costs, with good performance and reliable use. It adopts a combination of packing seal and mechanical seal. The packing seal uses high-temperature resistant packing, which has good hot-state adaptability, while the mechanical seal uses hard alloy materials with high mechanical strength and good wear resistance, ensuring the sealing performance under high temperature conditions. The third-generation polytetrafluoroethylene (PTFE for short) is used for the lip seal, which improves the sealing performance and corrosion resistance.
4. Model Parameters of LQRY Heat-conducting Oil Pump
| Industry Category | Machinery & Equipment/General Mechanical Parts/Pumps |
|---|---|
| Product Category | |
| Brand: | 诺西德 |
| Spec: | LQRY |
| Manufacturer: | 山东诺西德机械矿业设备有限公司 |
| Origin: | 113708 |
