Self-priming centrifugal oil pump, corrosion-resistant pump

CYZ Self-priming Oil Pump Notes:

I. Preparation and inspection before starting:

1. For this series of oil pumps, calcium-based grease and No.10 engine oil are used for lubrication respectively according to the working operation conditions of the pump. If

the pump lubricated with grease should regularly add grease to the bearing housing, for the pump lubricated with engine oil, if the oil level is insufficient, add enough

oil to it.

2. Check whether the liquid stored in the pump casing is higher than the upper edge of the impeller. If it is insufficient, you can directly inject the stored liquid into the pump body through the liquid filling port on the pump casing. Do not start and operate when the stored liquid is insufficient, otherwise the pump will not work properly and the mechanical seal is easily damaged.

3. Check whether there is jamming or bumping of the rotating parts of the pump.

4. Check whether the nuts on the pump base and all connections are loose.

5. Check the coaxiality or parallelism between the pump shaft and the motor shaft.

6. Check whether the inlet pipeline leaks. If there is air leakage, it must be eliminated.

7. Open the valve of the suction pipeline, and open the outlet control valve slightly (do not fully open it).

II. Pump shutdown

1. First, you must close the gate valve on the discharge pipeline.

The CYZ-A type self-priming oil pump is a pump product developed after digesting, absorbing and improving relevant technical data at home and abroad. This pump is an ideal product suitable for the petroleum industry, onshore oil depots and oil tank trucks. It is also suitable for use as ship cargo oil pumps, bilge pumps, fire pumps and ballast pumps, as well as machine cooling water circulation, etc. It can transport petroleum products such as gasoline, kerosene, diesel, aviation kerosene, as well as seawater and clean water respectively. The medium temperature ranges from -20℃ to 80℃. If chemical liquids are transported, the mechanical seal can be replaced.

CYZ Self-priming Oil Pump Product features:

1. This pump is a self-priming centrifugal pump. It has the advantages of simple structure, convenient operation, stable operation, easy maintenance, long service life and strong self-priming capability. There is no need for a foot valve in the pipeline, and it only needs to ensure that a fixed amount of priming oil is stored in the pump body before working. When used on oil tankers or water transport ships, it can also be used as a tank sweeping pump with good tank sweeping effect.

2. This pump is refined with selected materials. The seal adopts hard alloy mechanical seal. There is no need to install a safety valve on the discharge pipeline, and no foot valve on the suction pipeline, which simplifies the pipeline system and improves working conditions.

CYZ-A Self-priming Oil Pump Ordering Instructions:

1. Self-priming pump product name (direct-connected self-priming oil pump, direct-connected self-priming pump, seal-less self-controlled self-priming pump, magnetic self-priming pump, self-priming oil pump, direct-connected self-priming sewage pump,

self-priming sewage pump, clean water self-priming pump);

2. Self-priming pump product model (ZCQ, WFB, ZXL, CYZ-A, ZWL, ZW, ZX);

3. Self-priming pump product flow rate (5-51000m3/h);

4. Self-priming pump product head (10-150M);

5. Self-priming pump product power (0.55-250KW);

6. Self-priming pump applicable medium (tap water, river water, groundwater, clean water, liquid, sewage, dirt, seawater and chemical medium liquids with acidity and alkalinity, etc.);

7. Self-priming pump product materials (cast iron, cast steel, stainless steel);

8. Self-priming pump suction lift (1-5M)

8. Self-priming pump applicable industries (urban environmental protection, construction, fire protection, chemical industry, pharmaceutical, dye, printing and dyeing, brewing, electric power, electroplating, papermaking, petroleum, mining, equipment cooling, oil tanker unloading, etc.);

2. Stop the pump from rotating.

3. In cold seasons, drain the liquid stored in the pump body and the water in the bearing body cooling chamber to prevent the machine parts from cracking due to freezing.

Overview of CYZ Self-priming Oil Pump: