Alloy high-temperature mechanical seal gear oil pump
Contact Info
- Add:North Section of Industrial Road, Yutai County Economic Development Zone, Zip:
- Contact: 吴经理
- Tel:13012608150
- Email:15314489@qq.com
Other Products
The KCB series gear oil pumps are suitable for transporting lubricating oils or other liquids with similar properties, which contain solid particles and fibers, are non-corrosive, have a temperature below 80℃, and a viscosity of 5×10⁻⁶～1.5×10⁻³ m²/s (5-1500 cSt).
● Application Scope
It can be used as a transfer and booster pump in oil transmission systems;
It can be used as a transfer, pressurization and fuel pump in fuel systems;
It can be used as a hydraulic pump providing hydraulic power in hydraulic transmission systems;
It can be used as a lubricating oil pump in all relevant fields;
● Structural Features
This series of gear oil pumps consists of gears, shafts, pump bodies, valves, and shaft end seals. The gears are heat-treated to have sufficient hardness and strength, and are installed together with the shafts in replaceable shaft sleeves for operation. The lubrication of internal pump parts is automatically achieved by the output medium when the pump is working. There are oil drainage and oil return grooves in the pump, which reduce the torque borne by the gears during operation, thus lowering the bearing load and wear.
The pump is equipped with a valve as overload protection. The full recirculation pressure of the valve is 1.5 times the rated pressure of the pump, and it can also be adjusted according to actual needs within the allowable discharge pressure range. However, it should be noted that this valve cannot be used as a pressure reducer for long-term operation; if necessary, it can be separately installed on the pipeline.
When viewed from the outer extension end of the main shaft, it rotates clockwise.
● Performance Parameter Table
Model | Flow Q | Rotational Speed n (r/min) | Discharge Pressure p (Mpa) | Required Net Positive Suction Head (m) | Efficiency η (%) | Motor | ||
m³/h | L/min | Power (KW) | Model | |||||
KCB-18.3 | 1.1 | 18.3 | 1400 | 1.45 | 5 | 44 | 1.5 | Y90L-4 |
2CY-1.1/1.45 | ||||||||
KCB-33.3 | 2 | 33.3 | 1420 | 1.45 | 5 | 44 | 2.2 | Y100L1-4 |
2CY-2/1.45 | ||||||||
KCB-55 | 3.3 | 55 | 1400 | 0.33 | 7 | 41 | 1.5 | Y90L-4 |
2CY-3.3/0.33 | ||||||||
KCB-83.3 | 5 | 83.3 | 1420 | 0.33 | 7 | 43 | 2.2 | Y100L1-4 |
2CY-5/0.33 | ||||||||
KCB-135 | 8 | 135 | 940 | 0.33 | 5 | 46 | 2.2 | Y112M-6 |
2CY-8/0.33 | ||||||||
KCB-200 | 12 | 200 | 1440 | 0.33 | 5 | 46 | 4 | Y112M-4 |
2CY-12/0.33 | ||||||||
KCB-300 | 18 | 300 | 960 | 0.36 | 5 | 42 | 5.5 | Y132M2-6 |
2CY-18/0.36 | ||||||||
KCB-483.3 | 29 | 483.3 | 1440 | 0.36 | 5.5 | 42 | 11 | Y160M-4 |
2CY-29/0.36 | ||||||||
KCB-633 | 38 | 633 | 970 | 0.28 | 6 | 43 | 11 | Y160L-6 |
2CY-38/0.28 | ||||||||
KCB-960 | 58 | 960 | 1470 | 0.28 | 6.5 | 43 | 18.5 | Y180M-4 |
| Industry Category | Machinery & Equipment/Hydraulic Transmission/Mechanical Seals |
|---|---|
| Product Category | |
| Brand: | |
| Spec: | |
| Origin: | 113708 |
