Digital display overhead stirrer
Contact Info
- Add:No. 4285, Shendu Highway, Pujiang Town, Zip: 200000
- Contact: 胡工
- Tel:18001633556
- Email:15000845544@163.com
Other Products
Digital Display Overhead Stirrer
I. Product Introduction
Digital Display Overhead Stirrer can be applied in fields such as biopharmaceuticals, biochemistry, food, nanomaterials, coatings, adhesives, daily chemicals, printing and dyeing, petrochemicals, and paper chemicals. This digital display electric stirrer is suitable for dispersion, stirring and other mixing processes of multi-viscosity systems in laboratories.
II. Add New Functions to Your Laboratory
1. Digital display
2. Powerful, vertical, and humanized design
Based on the reliable YK120 series, performance and technical improvements have been made, ensuring stable motor power
3. Two speed gears (high and low speed), with a range of 60-2000 rpm.
4. Penetration stirring paddle (only when fixed).
Equipment Parameters | Values |
Power Supply | 220-240/100-115 V |
Motor Power | 120W |
Stirring Volume (H₂O) | 20 L |
Motor Input Power | 70 W |
Motor Output Power | 35 W |
Speed Display | LED LCD Display |
Speed Range | 60 - 2000 rpm |
Processing Viscosity | 10000 CP |
Stirring Shaft Output Power | 26 W |
Allowable Continuous Operation Time | 100 % |
Stirring Shaft Torque | 150 Ncm |
Stirring Shaft Torque (Overload) at 60 rpm | 300 Ncm |
Stirring Shaft Torque at 100 rpm | 150 Ncm |
Stirring Shaft Torque at 1000 rpm | 24 Ncm |
Speed Range I (50 Hz) | 60 - 500 rpm |
Speed Range II (50 Hz) | 240 - 2000 rpm |
Speed Range I (60 Hz) | 72 - 600 rpm |
Speed Range II (60 Hz) | 288 - 2400 rpm |
Speed Control | Stepless |
Stirring Paddle Fixation | Rotary Collet |
Rotary Collet Clamping Diameter Range | 0.5-10mm |
Hollow Shaft, Inner Diameter | 10.5 mm |
Hollow Shaft (Insertable when Stopped) | Yes |
Support Fixation | Extension Arm Collet Fixation |
Extension Arm Diameter | 13 mm |
Extension Arm Length | 160 mm |
Rated Torque | 1.5 Nm |
Allowable Ambient Temperature | 5 - 40 °C |
Allowable Relative Humidity | 80 % |
DIN EN 60529 Protection Rating | IP 20 |
Dimensions | 880×294×212 mm |
Weight | 3.1 kg |
III. Optional Configurations
1. Four-blade propeller type - standard stirring head, which makes the mixed medium flow axially from top to bottom with low shear force.
2. Three-blade propeller type - makes the mixed medium flow axially from top to bottom, generating local shear force. Suitable for medium and high speed use.
3. Dissolution type - makes the mixed medium generate radial flow from both top and bottom; the strong turbulence and high shear force formed can crush particles in the liquid. Suitable for medium and high speed use.
4. Centrifugal type - double blades open as speed increases, suitable for use in narrow-mouth containers. The stirring effect is similar to that of a four-blade propeller. Suitable for medium and high speed use.
5. Blade type - generates tangential flow with low turbulence and good heat exchange performance, applied in occasions requiring gentle stirring of media. Suitable for medium and low speed use.
6. Anchor type - generates tangential flow with high shear rate at the edge, preventing the mixed medium from depositing on the container wall. Suitable for low speed use. It is an ideal stirring element for polymer reactions and dispersion of minerals in liquids, especially for high-viscosity fluids.
7. Other special paddles - various other types of paddles can be selected to meet your special working conditions
IV. Maintenance of Mechanical Stirrers
·1. The bearing bears all the load of the machine, so lubrication is crucial for the bearing lifespan, which directly affects the service life and operation rate of the machine. Therefore, the injected lubricating oil must be clean and the seal must be good. The main oil injection points of this machine are (1) rotating bearings, (2) rolling mill bearings, (3) all gears, (4) movable bearings and sliding surfaces.
·2. Newly installed hoops tend to loosen and require regular inspection.
·3. Pay attention to whether all parts of the machine are operating normally.
·4. Check the wear degree of easily worn parts and replace worn parts in time.
·5. The base plane of the movable device should be kept free of dust and other debris, to prevent the movable bearing from failing to move on the base plane when the machine encounters unbreakable materials, which may lead to serious accidents. 6. If the bearing oil temperature rises, stop the machine immediately to check the cause and eliminate it.
·7. If there is an impact sound from the rotating gears during operation, stop the machine immediately, inspect and eliminate the fault before restarting.
| Industry Category | Machinery & Equipment/Engineering & Construction Machinery/Concrete Mixing Machinery |
|---|---|
| Product Category | |
| Brand: | YULDOR® |
| Spec: | YK-120 |
| Stock: | 10 |
| Manufacturer: | 上海 |
| Origin: | 113112 |
