Multi-point patrol and sweeping laser bird repellent device
Contact Info
- Add:Room C-9, Building C, Precision达 Industrial Park, No.39 Qingfeng Avenue, Longgang Sub-district, Longgang District, Shenzhen City, Zip: 518116
- Contact: 小李
- Tel:18820479231
- Email:2512646832@qq.com
Other Products
Multi-point Scanning Laser Bird Repellent Device
I. Overview
Bird damage is a major disturbance to the normal operation of substations. Since the construction of the first substation, power grid staff have been carrying out bird damage prevention work in full swing. The methods have changed from manually removing bird nests and installing bird spikes at the beginning to bird repellents that are widely used now. However, power grid departments have found that these methods only work in the early stage of bird damage, and the bird repelling effect will be greatly reduced after the birds adapt to them. In view of this situation, Telincon has developed the Multi-point Scanning Laser Bird Repellent Device to drive away birds around the substation, which can effectively disperse birds without harming them.
II. Working Principle
Starting from the instinct of organisms to seek advantages and avoid disadvantages, the Multi-point Scanning Laser Bird Repellent Device uses a 520nm green laser. Birds regard this frequency band of laser as a threat, and the birds that have been irradiated will immediately fly away from this area and will not choose to活动 around the substation for a long time. It has a very good bird repelling effect. The portable design can target the areas where the substation is severely damaged by birds to repel birds, avoiding "idle operation" of the equipment. The built-in photosensitive module enables the Multi-point Scanning Laser Bird Repellent Device to automatically adjust the laser power, avoiding device aging caused by long-term high-power operation and extending its service life.
III. Product Technical Parameters
1. Laser: 520nm
2. Laser Power: 500mW/1W/2W
3. Line Angle: 5°
4. Horizontal Rotation Angle: 0~350°
5. Vertical Rotation Angle: ±35°
6. Time Control: Hour/Week
IV. Postscript
Substations are usually located in remote environments, which are very suitable for bird activities. In addition, there are many steel structures in the substation. Compared with tree branches that are easily affected by wind and rain, steel structures are obviously a better choice for birds to build nests. The debris such as iron wires and electric wires used for nesting may easily cause faults and short circuits when falling into the substation. If the birds around the substation cannot be dispelled in time, it will be very detrimental to the normal operation of the substation. Once the Multi-point Scanning Laser Bird Repellent Device was successfully developed, it immediately cooperated with power grid departments in Hubei, Shaanxi and other regions to replace the original bird spike equipment for substations. On the day of installation, the bird damage problem was significantly improved. Moreover, in the later use result surveys, it was found that the Multi-point Scanning Laser Bird Repellent Device would not cause birds to develop adaptability, and its bird repelling effect remained excellent as always.
V. Product Advantages
The Multi-point Scanning Laser Bird Repellent Device can adjust its laser power according to the external ambient light intensity, and will shut down for protection at night, reducing the loss rate of the laser.
VI. Product Aliases
Multi-point Scanning Laser Bird Repellent Device, Remote Control Laser Bird Repellent Equipment, Beidou High-precision Synchronous Laser Bird Repeller
VII. Product Model
PSB100 Mr. Wang 1/3/6/8/2/3/5/0/0/2/9/
| Industry Category | Electronic Components & Supplies/Optoelectronic & Laser Devices/Other Optoelectronic & Laser Devices |
|---|---|
| Product Category | |
| Brand: | 特力康 |
| Spec: | PSB100 |
| Stock: | 999 |
| Manufacturer: | 特力康 |
| Origin: | 114403 |
