Special rubber additive NaST-50GA

Actmix
NaST-50GA

Series: Special Rubber Auxiliaries

Chemical name of active ingredient: Sodium Stearate
Polymer carrier: ACM
Product form: White granules

Features and Applications

Actmix NaST-50GA needs to be used in combination with Diuron-80 or quaternary ammonium chloride; As part of the ACM rubber vulcanization system, this vulcanization system basically does not cause delayed vulcanization, and has particularly strong vulcanization effect. The products produced have good mechanical and physical properties and permanent compression set. It can also be used in combination with sulfur or sulfur donors for the vulcanization of active chlorine-type ACM rubber.

Detailed Introduction

Actmix® NaST-50GA
Pre-dispersed Rubber Vulcanization Activator
Function: Vulcanization activator for ACM rubber

Product Description
Composition: Composed of 50% sodium stearate, 50% ACM rubber elastomer and dispersant.
Appearance: White granules
Density (20 ℃): Approximately 1.1 g/cm³
Safety characteristics: Refer to the safety data sheet

Application Information
Application: Actmix® NaST-50GA needs to be used in combination with Diuron-80 or quaternary ammonium chloride: As part of the ACM rubber vulcanization system, this vulcanization system basically does not cause delayed vulcanization, and has particularly strong vulcanization effect. The products produced have good mechanical and physical properties and permanent compression set. It can also be used in combination with sulfur or sulfur donors for the vulcanization of active chlorine-type ACM rubber.
Processing: Actmix® NaST-50GA is specially used for ACM rubber and special thermoplastic elastomers, enabling rapid absorption and excellent dispersibility in rubber. This product can also be easily and evenly dispersed in the mixture. Actmix® NaST-50GA can be added to open mixers and internal mixers for use.
Actmix® NaST-50GA pre-dispersed masterbatch has no dust flying during use, is easy to weigh and has excellent dispersibility.
Dosage: Actmix® NaST-50GA: 3-4phr Sulfur: 3-8phr

Application Information
Application: Used for gasoline, diesel and heat-resistant seals, rubber hoses, ACM parts for engineering vehicles, etc.
Packaging: Cartons lined with PE bags, net weight 25KG per carton; 600kg per pallet.
Storage stability: Store in a sealed, cool, dry and well-ventilated place. The recommended shelf life is two years.
Disposal: It is recommended to install exhaust ventilation in the working area of chemical additives during rubber processing. For further disposal information, please refer to the safety data sheet of Actmix NaST-50GA.