China Products List

Category:Hardware & Tools/Welding Materials & Accessories/Other Welding Materials

Product Description:Alloy Powder for Laser Cladding Strengthening and RepairLaser cladding technology is a novel surface modification technique. Its working principle primarily involves using a high-energy laser beam to intensely heat localized areas or the surface of mechanical components. This melts the laser cladding material together with the mechanical surface, achieving rapid solidification and forming a metallurgically bonded cladding layer on the surface.Laser cladding technology is mainly applied for surface modification of materials requiring high surface performance and for the repair of large machinery surfaces. It aims to achieve characteristics such as high-temperature resistance, wear resistance, and corrosion resistance on component surfaces, effectively extending machinery service life and reducing operational costs.Our company has successfully developed the SD series products for laser cladding, which include: highly corrosion-resistant nickel-based alloys, high-hardness nickel-based alloys, medium-hardness nickel-based alloys, highly wear-resistant iron-based ceramic composites, and highly wear-resistant nickel-based ceramic composites. These are suitable for both high-speed laser cladding and traditional laser cladding processes.Highly corrosion-resistant nickel-based alloys: The laser-clad surface is crack-free, maintains high corrosion resistance at temperatures up to 550°C, and is suitable for high-temperature corrosive environments under complex atmospheres. This product is ideal for protecting the inner walls of waste incinerators.High-hardness nickel-based alloys: With a hardness of HRC 50~58, they are suitable for enhancing surface hardness of workpieces and offer excellent overall performance.Medium-hardness nickel-based alloys: With a hardness of HRC 42~45, they are suitable for enhancing surface hardness of workpieces and offer excellent overall performance.Highly wear-resistant iron-based ceramic composites: Exhibit outstanding surface wear resistance and are suitable for surface repair of large components such as mining machinery.Highly wear-resistant nickel-based ceramic composites: The laser-clad surface is crack-free and possesses high-temperature wear resistance. It maintains good performance under high-temperature sliding and impact wear conditions up to 650°C. This product is suitable for high-temperature wear environments such as steel mill hot rolling workshops.Taizhou Shandi Additive Manufacturing Co., Ltd. produces and sells various types of laser cladding alloy powders, including titanium-based alloy powders, nickel-based alloy powders, cobalt-based alloy powders, iron-based alloy powders, high-temperature alloy powders, mold steel alloy powders, copper alloy powders, aluminum-based alloy powders, and custom alloy powders. Welcome to purchase! more>

Category:Hardware & Tools/Seals & Gaskets/Other Seals

Product Description:橡胶密封圈【产品尺寸】：依客户需求定制【产品材质】：（EPDM)也可依据产品具体使用环境定制【产品特点】：密封性能好，防水防尘，采用优质环保EPDM无硫橡胶材料具有抗老化、耐臭氧、高低温性能好等特性。【应用领域】：汽车等机械设备领域汽车车载导航密封圈应用于汽车导航仪内部防尘密封领域，可根据不同使用环境，选用安全环保无污染无硫磺橡胶材料，耐高温等恶劣环境。密封性能好，使用寿命长，质量可靠涌永硅橡胶专注于硅橡胶制品30多年，拥有东莞沙田、长安、越南三大制造基地，完全能够满足您的供货需要，欢迎广大客户来厂参观考察。 more>

Category:Hardware & Tools/Molds & Dies/Other Molds

Product Description:Metal 3D Printing Alloy Powder for Complex and Special-Shaped Mold PartsMetal 3D printing enables the production of molds with complex conformal cooling channels. Compared to traditional molds, conformal cooling channel molds allow for rapid and uniform cooling of products during use, resulting in faster demolding and superior quality outcomes. The conformal water-cooling technology in molds liberates and opens up the design possibilities for mold products, driving the trend toward customization and complexity in mold manufacturing.Metal 3D printing technology is suitable for the integrated forming of complex structures, with manufacturing costs independent of structural complexity. It breaks the constraints of traditional processing techniques, offering greater flexibility for optimized structural design, and is particularly well-suited for processing complex geometric components through topology optimization.Taizhou Shandi Additive Manufacturing Co., Ltd. produces and sells a variety of metal 3D printing alloy powders, including titanium-based alloy powders, nickel-based alloy powders, cobalt-based alloy powders, iron-based alloy powders, high-temperature alloy powders, mold steel alloy powders, copper alloy powders, aluminum-based alloy powders, and custom alloy powders. Welcome to purchase! more>

Category:Hardware & Tools/Cutting Power Tools/Drill Bits

Product Description:Laser Power: 1000W/1500W/2000WEffective Cutting Area: 2500mm×1200mmCutting Speed (m/min): 0.6-1.2(1000W)/0.8-1.8(1500W)/ 1.0-2.2(2000W) more>

Category:Hardware & Tools/Fasteners & Connectors/Other Fasteners & Connectors

Product Description:Comprehensive body composition testing for pregnant women enables nutritional monitoring and management, weight gain management, dietary intake nutrition assessment, exercise evaluation, and overall nutritional management during pregnancy. It also features individualized nutrition monitoring and weight monitoring functions: weight gain curve analysis uses both international (IOM) and domestic weight gain curves as the basis for evaluating weight changes, providing reasonable weight ranges and weight gain recommendations throughout pregnancy, as well as weekly weight gain management during the first, second, and third trimesters. From the perspective of meeting nutritional meal planning needs during pregnancy, it combines national nutritional intake standards and daily dietary guidelines to tailor scientific and nutritious dietary plans for pregnant women, achieving scientific guidance for body composition testing and personalized diet during pregnancy.<img src="https://img-i-album.toocle.com/view/2025/09/11/a9/68c2691d329a9.jpg" style="max-width:100%;"/>1. Weight monitoring function: Weight gain curve analysis uses both international (IOM) and domestic weight gain curves as the basis for evaluating weight changes, providing reasonable weight ranges and weight gain recommendations throughout pregnancy, as well as weekly weight gain management during the first, second, and third trimesters.2. Blood pressure and blood glucose monitoring function, with automatic curve generation.3. Fundal height and abdominal circumference monitoring function, with automatic curve generation.4. Dietary recommendation modes: individualized dietary nutrition meal planning mode, standard dietary mode, and nutrition-related disease nutritional dietary mode.5. Individualized nutrition meal planning: Provides personalized meal plans based on body composition measurement results, gestational week, pre-pregnancy BMI, physical activity intensity, and other parameters.6. For 15 common pregnancy discomfort symptoms and diseases, intelligently generates nutrition guidance plans and recipes tailored to individual needs.7. Capable of generating 10 types of reports.8. System database: The system includes a built-in database of over 2,500 food component content entries and over 2,500 dish entries, eliminating the need for users to add food data and meeting the usage needs of users across different regions.9. Hospital and home integration: PC and WeChat mini-program information interoperability enhances the effectiveness of family nutrition management plans. more>

Category:Hardware & Tools/Rolling Bearings/Self-Lubricating Bearings

Product Description:Ingersoll Rand Industrial Technology provides genuine Ingersoll Rand parts: 23782311 air filter V132-160, 49183429 solenoid valve, 24436311 hose HYD1.50X26 replacement for 85576536, 24020182 intake valve control block V90-160, 24172215 air filter M90-160, 42866608 solenoid valve, 35313543 bearing S100VHP400BEARING, 95937678 right-angle connector 2.0MNPT/2.0T, 22130223 air filter element, 23782352 air filter element V132-160, ATC20020 vent valve HEVHEV08EG, ATC14036 air filter element, 99289894 spare parts kit minimum pressure valve M90-160, 24623795 self-cleaning filter element Φ350*660, ATC20018 inverse proportional valve PRNE, ATC35028 exhaust elbow, 39446968 minimum pressure valve (1.25), 93471191 hose assembly new: 85561868, 23917842 thermostat valve repair kit K1V90-110, 23850738 check valve, SE001444 intake valve cylinder universal: ATM63029/ATS07040 (for 46831210), 39929435 pressure sensor, 39251061 contactor, 24029415 solenoid valve on-off V01692E2V03, 88152749 tube assembly oil cooler outlet, 39545157 exhaust elbow (air-cooled), 39925805 pipe intercooler outlet stainless steel - water-cooled, ATC26033 air filter element random spare part, 22137699 safety valve 12BARBSP1, 22108377 motor pulley 12-slot 315MM, 23738982 hose V1.5 aftercooler - unit exhaust V55, 23800899 hose V1.5 inch, 23976319 hose V90-160 1.5 inch thermostat valve - heat exchanger, 99250532 thermostat valve DG (1+1/2)" T=55℃, 42843771 oil filter assembly, 39877618 vacuum switch SG0-15PSIG, 39588116 pressure relief valve SSR60HP, 85561850 hose D1.25X46.0, 39313127 oil distribution connector, 23800584 pressure sensor V0-16BAR 0-16bar, 19041144 exhaust pipe air-cooled COBRA2S90/110, 22078422 motor shaft sleeve, 88149554 tube assembly cooling water, ATC20025 safety valve popping pressure 0.90MPa, SP120113 air filter element 1621737600, 99246100 minimum pressure valve, 23531577 minimum pressure valve service kit DN64OUTDN76INR90-16, 92888262 oil filter element, 54654652 solenoid valve 1/2NPT 110V 50/60HZ, 99271611 safety valve ZG (1+1/4)", ATC05026 drain solenoid valve, ATS05024 metal hose (both ends 1.625UNF), 15469786 bearing SKF31309, 85562155 hose drawing 23254097, 85561769 hose D1.25X34.0 reference drawing 36889905, ATC59062 hose, SP120114 oil filter element, 1621737890/00, 39477674 check valve 3", 49186216 intake valve service kit VMCRB80E-NEW, 39477039 adjustable straight connector 2.5-12SAE, 42855437 minimum pressure valve, 99260788 safety valve VHP400/P600/900E/XP900/P1050ESAFETYVALVE, ES600300 transformer, 39903281 air filter element M90-160, 22247308 check valve replacement for 39479852 M90/160, ATC05044 two-position three-way solenoid valve new: 39184841, 24093247 exhaust hose assembly, 39323043 pipe 8.00X7.75 aluminum, 22189039 V-belt 2164mm, ATF21025 thermometer, 99289845 minimum pressure valve M37/55, 23782394 oil filter V90-110, 23778665 exhaust pipe V55, 24012932 filter element VF216VA, 22058358 hose 90-degree -12X72 PEGASUS new: 85560597, 39911615 oil filter element, 85561231 hose D1.00x62.0 reference drawing 36889897, 22058366 hose -16X62 PEGASUS new: 85561231, 99246191 butterfly valve, 39925789 pipe intercooler inlet stainless steel - water-cooled, 42852459 temperature sensor, 23392368 minimum pressure maintenance valve service kit Evers, ATC14034 elbow rubber, ATC05012 vent hose, 88149547 tube assembly cooling water inlet, 95986923 threaded connector 1.50"X9.0"LG stainless steel, 39482476 tee 32JIC-2.5UNF, ATF23475 minimum pressure valve, 99250631 hydraulic cylinder S100S200M37VHP600E/700/900, ATC05029 hydraulic cylinder, 23782345 air filter element V90-110, 42843805 oil filter element S200-II, SP110003 intercooler drain valve valve8204094034, 99246209 butterfly valve DN100DTIW-0.5, 39419668 temperature switch 245F123℃ new 37952264, 24082455 safety valve V90-160 16bar, 23830730 safety valve V16BAR, 23801392 safety valve V9BAR, 99300618 safety valve 1.25NPT 11.35BAR, 85647600 relay 2-way 110V coil kit, 22064067 tube assembly cooling water, 95919114 right-angle connector NPT2-32JIC, 23443690 safety valve 16bar GBM33, 23443716 safety valve 9.5bar GBM33, 95953337 elbow 0, ATM63002 differential pressure switch, 23443732 safety valve 15.4bar GBM33, SP050018 bearing block 2254704100, 89245286 shaft sleeve, 89206650 tube assembly fuel shutoff solenoid to main engine, 22064075 tube assembly oil cooler cooling water outlet, 39113311 check valve S100/S200VHP600E700900, 22259592 tube assembly fuel shutoff valve to oil injection M250, 23800931 hose V1 inch cylinder - intake valve, ATS11059 safety filter element, 39918339 tube assembly, 39588058 safety valve, ESG00201 loading solenoid valve, ATC62021 right-angle connector, 22064059 tube assembly cooling water inlet, 23976327 hose V90-160 1.5 inch main engine - thermostat valve. more>

Category:Hardware & Tools/Pipe Fittings/Tee Fittings

Product Description:Typically, Ingersoll Rand air compressor gear transmission systems generate a complex broadband vibration spectrum, with frequencies ranging from below the shaft rotational speed up to several times the gear meshing frequency (number of teeth × shaft revolutions per minute).At the low-frequency end of the spectrum are the shaft rotational speed and its harmonics. Usually, the amplitude at the fourth or fifth harmonic of the Ingersoll Rand air compressor shaft speed decreases to below 1% of that at the fundamental frequency, making it negligible for many practical applications.The next set of frequencies are the mid-frequencies, which typically appear between the rotational speed frequency and the meshing frequency. These mid-frequencies are a series of frequencies synchronized with multiples of the rotational speed frequency of one or two shafts, making them easily explainable based on the compressor's operation.Additionally, there is at least one scenario where these frequencies coincide with the natural frequencies of the gear transmission components themselves, which could very well be due to resonance amplification caused by a very low-level excitation.In many cases, changes in the amplitude of mid-frequencies can serve as highly sensitive early indicators of gear transmission failure in Ingersoll Rand air compressors.The gear meshing frequency (gear speed × number of teeth) and its harmonics are usually the most prominent components in the housing vibration and acoustic spectra recorded from the gear transmission system of Ingersoll Rand air compressors.The meshing frequency can be a single prominent frequency or may be surrounded by sidebands on both sides, which are frequencies spaced at intervals of the shaft rotational frequency around the meshing frequency.The amplitude at the meshing frequency can vary significantly from one tooth to another, depending on the number of teeth, transmission ratio, surface roughness, and load.As a general rule, the greater the number of teeth, the smaller the transmission ratio, the finer the tooth surface roughness, and the lighter the load on the teeth, the smaller the amplitude at the meshing frequency.Typical amplitude values at the meshing frequency for Ingersoll Rand air compressors usually range from 4 to 8 G in acceleration; however, it is not uncommon to encounter amplitudes exceeding this range even under non-abnormal conditions.The amplitude at the meshing frequency is often used as a measure of condition, but normal variations due to load changes can mask any trends caused by changes in condition.Three acceleration characteristic diagrams recorded from a gas turbine generator reducer were measured under three operating conditions: rated speed with the circuit breaker open, approximately half load at 9.5 MW, and full load at 15.5 MW at room temperature.Note that there is a significant change in the amplitude at the meshing frequency from no load to full load. Since the characteristic diagrams were recorded over about 15 minutes when the machine was presumably operating satisfactorily, such variations are likely only due to load changes and the resulting temperature changes in the reducer components.Also note the relative changes in the amplitude of the harmonics of the meshing frequency from no load to full load.At 9.5 MW, the characteristic diagram shows smaller amplitudes at the second and fourth harmonics, combined with a larger amplitude at the third harmonic, suggesting a square wave, possibly due to a sudden force during engagement and disengagement.At full load, this characteristic disappears and is replaced by a more normal harmonic sequence with decreasing amplitudes, indicating a slightly distorted sine wave. Unfortunately, the recording process was not continuous, so the changes in amplitude at the meshing frequency throughout the loading process could not be observed. more>

Category:Hardware & Tools/Brushes/Other Brushes

Product Description:Scope of Application: This latch is primarily used for the door locking system of Ingersoll Rand air compressors, ensuring operational safety and ease of equipment maintenance.Scope of Application: This latch is primarily used for the door locking system of Ingersoll Rand air compressors, ensuring operational safety and ease of equipment maintenance.Scope of Application: This latch is primarily used for the door locking system of Ingersoll Rand air compressors, ensuring operational safety and ease of equipment maintenance. more>

Category:Hardware & Tools/Fasteners & Connectors/Other Fasteners & Connectors

Product Description:Winged Fruit Oil Gel Candy OEM Manufacturing Supplier Winged Fruit Oil OEM Private Label Processing ShandongContact 157-6379-6768OEM Private Label Processing Solutions:      1. Use your brand, we provide both labor and materials for private label production      2. Custom processing based on samples you provide      3. Custom processing based on formulas you provide      4. Use your outer packaging, we complete the inner product      5. You can use our company's branded custom outer packaging<img src="http://tt.toocle.com/ueditor/php/upload/image/20200928/1601259116307356.jpg"> more>

Category:Hardware & Tools/Rolling Bearings/Other Bearings

Product Description:Shandong Meian Mining Equipment Co., Ltd. supplies online monitoring of motor bearing temperature and vibration for coal mine electromechanical equipment, online monitoring of temperature and vibration for coal mine electromechanical equipment, online monitoring of temperature and vibration, bearing temperature and vibration monitoring, and intelligent fault diagnosis for the operational status of large coal mine electromechanical equipment.Equipment condition monitoring and fault diagnosis technology is one of the equipment maintenance methods. Equipment fault monitoring and diagnosis technology involves using scientific detection methods and modern technological means to monitor and troubleshoot the current operational status of equipment, thereby determining the reliability of the equipment's operational status and confirming whether it is operating normally locally or as a whole.PT100 Main technical parameters of temperature sensor:Measurement range: -200℃~650℃. During motor operation, the bearing temperature must not exceed 100℃,Coal mine electromechanical equipment such as hoists, wire rope traction, drum belt conveyors, belt conveyors, air compressors, pressure fans, water pumps, etc., require the addition of temperature and vibration monitoring for motors and main bearings.Device Functions1、Online monitoring of temperature and vibration for the main bearings of motors in equipment such as hoists, water pumps, belt conveyors, etc.2、Detection and diagnosis of bearing temperature and vibration for mining high-voltage asynchronous motors.3、Online monitoring of temperature and vibration for the main bearings of drums in equipment such as hoists, water pumps, belt conveyors, etc.4、Online monitoring of temperature and vibration for motors and main bearings of large underground electromechanical equipment.5、Can simultaneously collect data on the temperature of the front and rear motor bearings and the vibration level of the motor, and analyze and process the received information.6、The system provides a network interface, which can be directly connected to the smart mine network or to systems within other networks.7、The online system software can monitor the spectrum, time-domain waveform, trend, 3D spectrogram, and coordinate diagram of any channel in real time, and can also perform remote monitoring via the internet.8、Audible and visual alerts for exceeding temperature and vibration limits of motor main bearings; local or remote audible and visual alerts.9、Audible and visual alerts for exceeding temperature and vibration limits of drum main bearings; local or remote audible and visual alerts.10、The online system software can monitor the spectrum, time-domain waveform, trend, 3D spectrogram, and coordinate diagram of any channel in real time, and can also perform remote monitoring via the internet;11、Visualization of real-time curves for motor bearing temperature and vibration parameters;12、Functions include listing, storage, display, alerts, network upload, remote monitoring, report printing, etc.;13、The system provides a network or RS485 interface, which can be directly connected to the smart mine network or to systems within other networks;14、Traceable records of alerts for motor bearing temperature and vibration parameters;15、Remote (Ethernet or wireless network) online monitoring of temperature and vibration parameters for drum and motor main bearings;16、Online monitoring of three-phase winding temperature for motors in equipment such as hoists, water pumps, belt conveyors, etc.;17、Online monitoring of motor voltage for equipment such as hoists, water pumps, belt conveyors, etc. more>

Category:Hardware & Tools/Rolling Bearings/Other Bearings

Product Description:Shandong Meian Mining Equipment Co., Ltd. supplies online monitoring of coal mine motor bearing temperature and vibration, online monitoring of coal mine electromechanical equipment temperature and vibration, online monitoring of coal mine motor bearing temperature and vibration, and online monitoring and intelligent fault diagnosis of the operating status of large coal mine electromechanical equipment.The "Basic Requirements and Scoring Methods for the Coal Mine Safety Production Standardization Management System," implemented on July 1, 2020, states that coal mine electromechanical equipment such as hoists, wire rope traction, drum belt conveyors, belt machines, air compressors, pressure fans, and water pumps require the addition of temperature and vibration monitoring for motors and main bearings.Coal mine motor bearing temperature and vibration monitoring systems are widely used in coal mine main fans, pressure fans, belt machines, drum belt conveyors, drainage pumps and motors, hoists, etc., helping to grasp the temperature and vibration data of motors during equipment operation.The motor bearing temperature and vibration monitoring system features multiple communication interfaces such as RS232, RS485, and Ethernet, supporting various communication protocols including MODBUS-RTU, MODBUS-TCP, and PROFINET. The system integrates 485 communication technology, Ethernet communication technology, human-machine interface technology, and fault diagnosis technology to monitor the vibration, temperature, and other statuses of equipment motor bearings in real time, promptly identifying electromechanical equipment faults to ensure the normal operation of mine production.Motor health analysis: Utilizes AI intelligent algorithms to identify system inefficiencies, uncover energy-saving potential, perform timely maintenance on rotating equipment, avoid equipment failures or sub-health conditions, and improve the output and quality of service products. Without replacing equipment, it reduces emissions and environmental impact while enhancing energy efficiency.Device Functions1. Online monitoring of motor bearing temperature and vibration for coal mine hoists, water pumps, and belt machines2. Detection and diagnosis of mining motor bearing temperature and vibration3. Online monitoring of drum bearing temperature and vibration for hoists, belt conveyors, and belt machines4. Online monitoring of motor and main bearing temperature and vibration for underground large electromechanical equipment5. Simultaneously collects values of front and rear motor bearing temperatures and motor vibration levels, analyzing and processing the received information6. Online system software can monitor the spectrum, time-domain waveform, trends, 3D spectrograms, and coordinate diagrams of any channel in real time, and also enables remote monitoring via the internet.7. Visual inspection of real-time curves for motor bearing temperature and vibration parameters;8. Features functions such as listing, storage, display, alerts, network upload, remote monitoring, and report printing;9. Online monitoring of three-phase winding temperature for equipment motors such as hoists, water pumps, and belt machines; more>

Category:Hardware & Tools/Pipe Fittings/Tee Fittings

Product Description:【Specification Model】<img src="https://img-i-album.toocle.com/view/2024/09/12/e9/66e2afd1789e9.png" style="max-width:100%;"/><img src="https://img-i-album.toocle.com/view/2024/09/12/89/66e2afd6bf089.png" style="max-width: 100%;"/><img src="https://img-i-album.toocle.com/view/2024/09/12/32/66e2afdba5d32.png" style="max-width: 100%;"/><img src="https://img-i-album.toocle.com/view/2024/09/12/c1/66e2afe02d0c1.png" style="max-width: 100%;"/><img src="https://img-i-album.toocle.com/view/2024/09/12/70/66e2afe48db70.png" style="max-width: 100%;"/><img src="https://img-i-album.toocle.com/view/2024/09/12/e6/66e2afe9da7e6.png" style="max-width: 100%;"/><img src="https://img-i-album.toocle.com/view/2024/09/12/02/66e2afed95e02.png" style="max-width: 100%;"/><img src="https://img-i-album.toocle.com/view/2024/09/12/4e/66e2aff2b5d4e.png" style="max-width: 100%;"/><img src="https://img-i-album.toocle.com/view/2024/09/12/d3/66e2aff6bddd3.png" style="max-width: 100%;"/><img src="https://img-i-album.toocle.com/view/2024/09/12/64/66e2affab3e64.png" style="max-width: 100%;"/> more>

Category:Hardware & Tools/Cutting Power Tools/Drill Bits

Product Description:1. Purpose and Features1) Stump Crusher: A specialized equipment for cutting tree stumps, widely used in biomass power plants. The product is constructed with high-strength steel plates and employs a blade roller cutting mechanism. This machine replaces traditional wood splitters and chippers, directly processing entire stumps into qualified biomass raw materials, saving processes and reducing costs. It is an ideal biomass preparation equipment.2) Developed by our company based on market needs, the stump crusher features high output, labor-saving, fast and convenient feeding. It eliminates the previous hassle of having to split large stumps with a wood splitter first and then chip them with a wood chipper.Now, with just one stump crusher, a grab machine can directly feed stumps into the crusher for chipping.2. Main Technical Parameters and ModelsModelHX3600Blade Roller Diameter(mm)680Blade Roller Speed(rpm)1405Rotor Type2 rotors 6 flying bladesScreen Size(mm)50 or customizedMain Motor Power(kW)250Oil Pump Motor Power(kW)3Feeding Motor Power(kW)7.5Discharge Motor Power(kW)7.5Feeding Size(mm)3600-2300Maximum Processing Material Size(mm)2100Discharge Conveyor Length(m)10Production Capacity(tons/hour)20-25Main Machine Weight(tons)25 more>

Category:Hardware & Tools/Fasteners & Connectors/Other Fasteners & Connectors

Product Description:Product IntroductionVitamin C is abundant in fresh vegetables and fruits. For normal and healthy individuals, a balanced diet with plenty of fruits and vegetables can generally meet the body's vitamin C requirements, making additional vitamin C supplements unnecessary.This product is scientifically formulated with sorbitol, vitamin C, vitamin B1, vitamin B2, sucralose, sweet orange fruit powder, food flavoring, and magnesium stearate as main ingredients, using modern processing techniques for precise blending and refinement.【Product Name】Qing Bao Tang Vitamin C Tablets【Product Type】Sports Nutrition Food (Endurance Category)【Ingredients】Sorbitol, Vitamin C, Vitamin B1, Vitamin B2, Sucralose, Sweet Orange Fruit Powder, Food Flavoring, Magnesium Stearate【Suitable For】Individuals engaged in middle and long-distance running, jogging, brisk walking, cycling, swimming, rowing, aerobic exercises, dancing, outdoor sports, etc.【Usage and Dosage】One tablet daily, to be chewed【Shelf Life】24 months【Storage Method】Keep sealed in a cool, dry place【Food Production License Number】SC11337082906741【Executive Standard】GB 24154【Place of Origin】Jining, Shandong【Content Per Tablet】Vitamin C: 100mg; Vitamin B1: 0.46mg; Vitamin B2: 0.46mg more>

Category:Hardware & Tools/Fasteners & Connectors/Other Fasteners & Connectors

Product Description:Solid Beverages Liquid Beverages Functional Beverages Plant-based Beverages Customization OEM Contract Processing 15805371693 more>

Category:Hardware & Tools/Cutting Power Tools/Drill Bits

Product Description: more>