Negotiable

Category: Chemicals/Oxides/Cobalt Oxide

Company: 伟信医药(上海)有限公司

Product Description: CAS NO:12017-67-3EC NO:234-624-1Molecular Formula:Co5PrMolecular Weight:435.5736Synonyms:Cobalt, compound with praseodymium (5:1);cobalt; praseodymium;Molecular Structure: more>

Negotiable

Category: Chemicals/Water Treatment Agents/Other Water Treatment Agents

Company: 上海富蔗化工有限公司

Product Description: CAS NO:25101-03-5EC NO:Molecular Formula:C9H18O6Molecular Weight:222.2356Synonyms:;Poly(propylene adipate);Poly(1,2-propylene glycol adipate);Poly(propylene glycol adipate);Propylene glycol, adipic acid resin;hexanedioic acid-propane-1,2-diol (1:1);Molecular Structure: more>

Negotiable

Category: Chemicals/Chemical Intermediates/Intermediate Compounds

Company: 上海双冠化工有限公司

Product Description: CAS NO:68412-48-6EC NO:270-192-0Molecular Formula:C15H17NOMolecular Weight:227.3016Synonyms:Acetone diphenylamine condensation products;Acetone, diphenylamine condensation product;Diphenylamine, acetone reaction product;N-Phenylbenzeneamine, 2-propanone reaction product;propan-2-one-N-cyclohexylcyclohexanamine (1:1);propan-2-one-N-phenylaniline (1:1);Acetone Diphenylamine;Antioxidant BLE;Rubber Antioxidant BLE-W;Anti-oxidant agent BLE-W;Molecular Structure: more>

Negotiable

Category: Chemicals/Amines/Other Amines

Company: 上海麦伦日化有限公司

Product Description: CAS NO:8051-30-7EC NO:232-483-0Molecular Formula:C4H11NO2·Molecular Weight:Synonyms:Coconut oil diethanolamide;Coconut oil, condensed with diethanolamine;Coconut oil, diethanolamine condensate;Coconut oil, reaction product with diethanolamine;Diethanolamine, coconut oil condensate;Coconut oil diethanolamine condensateMolecular Structure: more>

Negotiable

Category: Chemicals/Inorganic Salts/Silicates

Company: 自贡自泵球阀水泵有限公司

Product Description: 循环泵化工泵用65轴径耐腐蚀耐高温碳化硅钛材TA2双端面集装式机封带外冲洗水价格说明：由于产品的特殊性，本店产品的标价仅供参考。机械密封产品属于特殊品，根据材质的不同，尺寸的不同、结构形式的不同，采购数量的不同，价格都随之改变，所以您选购我们的产品之前，请与我们客服联系机封型号：ZCMSD-65TiT货期说明：机械密封的交货期 一般在30天左右。机封结构：集装式，双端面，多弹簧过流材质：TA2+碳化硅SiC冲洗方案：外冲洗工况介质：氯化钠及氯化钾混合溶液介质温度：105~120℃主要应用：腐蚀介质的输送。适用泵型：含氯离子的化工泵 轴流泵 强制循环泵也可来图来样定制维修各种尺寸各种材料的机封。供货单位：自贡自泵球阀水泵有限公司ZIPO VALVE & PUMP CO., LTD more>

$1800

Category: Chemicals/Inorganic Salts/Halates

Company: Sichuan High-Purity Materials Technology Co., Ltd.

Product Description: Potassium tellurite (Dipotassium tellurite), chemical formula K₂TeO₃, CAS number 7790-58-1, molecular weight 253.79. This compound appears as a white to pale yellow powder or colorless monoclinic crystals, with a density of 3.503 g/mL (25°C), a melting point of 460-470°C. It is highly soluble in water, hygroscopic, and should be stored in a cool, dry environment at 2-8°C. more>

$15600

Category: Others

Company: Dongguan Zhunna Optoelectronic Technology Co., Ltd.

Product Description: 1: FeaturesVacuum chamber size: Φ600-1800mm; 60-point/80-point optical thickness monitoring; Equipped with an ion source featuring uniformly distributed high ion current density; Dual electron guns; Multi-point and ring-type crucibles capable of depositing over 100 layers; Fully automated deposition process using an automatic deposition control system; Workpiece holder options include bell jar or planetary types; Exhaust system options include diffusion pump + cryogenic condenser (POLYCOLD) or cryopump; Specification equipment name(Sales Technical Manager Yang: 181-030-45976)2: SpecificationsOTFC-1300CBI/DBI Vacuum chamber: SUS304, φ1300mm×1610mm (H); Workpiece holder: φ1130mm; Workpiece holder rotation speed: 10rpm to 50rpm (variable); Optical thickness control: HOM2-R-VIS350A optical thickness monitorWavelength range: 350nm to 1100nmReflective/transmissive crystal thickness gauge: XTC/3+6-point crystal sensor; Evaporation source: 2 sets of electron guns; Ion source: 17cm RF ion source; Exhaust system: Mechanical pump + 2 diffusion pumps + Polycold (or 2 cryopumps)3: PerformanceAchievable pressureBelow 7.0×10⁻⁵ Pa; Exhaust time: 15 minutes (atmospheric pressure to 1.3×10⁻³ Pa); Substrate temperature: Maximum 350°C; Operating conditions: Equipment dimensions approximately 5000mm (W)×6500mm (D)×3500mm (H); Power supply: 3-phase, 200V, 50/60Hz, approximately 104KVA; Water flow rate: 140 liters/min or above; Air pressure: 0.5MPa or above; Weight: approximately 8500kg more>

Negotiable

Category: Chemicals/Chemical Intermediates/Intermediate Compounds

Company: Changsha Pingchuan Electronic Technology Co., Ltd.

Product Description: PCT-SL-2S Digital Dual-Axis Inclinometer with Digital Display InstrumentThis digital display instrument is specifically designed to show the angles measured by the inclinometer sensor. Each unit is calibrated for levelness and graduation before leaving the factory. It also features a button for relative angle measurement, allowing the current angle to be set as zero for measuring relative inclination changes.This digital display instrument is a dual-axis, small-range model. It has a compact design, versatile operation modes, and supports remote control with external inclinometer sensors, making it suitable for remote angle data collection in specialized industries.The display section uses industrial-grade digital tubes, ensuring reliable performance in wide-temperature industrial environments. Its high cost-effectiveness is a key advantage, and multiple installation and combination options meet various industrial application needs.Main Features:Dimensions 60*90*32mm          Dual-row digital display           Range ±5°～±90°High resolution 0.01°          High vibration resistance >2000g        Wide operating temperature -10°～ +70℃Multiple combination options IP65 protection rating           Zero setting functionApplications:Inclination platform measurement Bridge and dam monitoring        Wireless base station attitude monitoringGeological equipment tilt monitoring Instrument calibration and adjustment        High-precision level measurementPCT-SL-2S Digital Dual-Axis InclinometerMain Features:1) X and Y dual-axis inclination measurement2) Range ±1～±90° selectable3) Wide voltage input 9～36V4) Output methods RS232; RS485 or TTL5) Resolution 0.05°6) Long-term stability 0.2°7) Wide operating temperature -40～+85℃8) High vibration resistance >3500g9) IP67 protection rating10) Dimensions 55×37×24mm11) Factory default horizontal installationManufacturer: Changsha Pingchuan Electronic Technology Co., Ltd. Sensor Manufacturer more>

$3700

Category: Chemicals/Chemical Intermediates/Intermediate Compounds

Company: Huizhou Dongling Intelligent Technology Co., Ltd.

Product Description: Embedded 19-inch Fanless Industrial All-in-One PC with WiFiModel: PPC-DL190DProduct Introduction:The 19-inch LED touchscreen industrial panel PC customized all-in-one unit is made of aluminum-magnesium alloy, featuring a lightweight and aesthetically pleasing design.It is characterized by sturdiness, shock resistance, moisture resistance, dust resistance, high-temperature tolerance, multiple expansion slots, and easy scalability, making it an ideal application platform for various industrial control, traffic control, environmental monitoring, and other automation fields.The unit is equipped with a 19-inch wide-temperature, high-brightness LED LCD display, integrated with an industrial-grade low-power embedded motherboard, supporting SSD and HDD, multiple I/O interfaces, and an optional resistive touchscreen; the 19-inch LED display includes an energy-saving standby mode.Supports scheduled wake-up function.Product Features:1. The front panel is made of brushed aluminum alloy, providing durability, excellent shock resistance, and impact resistance.2. Installation options include embedded, wall-mounted, and desktop placement.3. The front panel features brightness adjustment and a power button for convenient and comfortable operation.4. The unit adopts a cable-free assembly design, constructed by stacking a dual-layer integrated industrial motherboard, effectively overcoming challenges in harsh conditions such as strong vibrations and high temperatures.5. The PC supports a wide voltage input range of 9V-30V and comes with a 12V5A power adapter.6. The internal motherboard includes a PCI-E interface, allowing for functional upgrades with 4G modules (Telecom/Unicom/Mobile), WiFi modules, GPRS modules, etc.7. The unit weighs 8.9kg.Product Parameters:Processor: Intel Ivy Celeron Quad-Core J1900 2.0GHz or Core seriesChipset: Intel NM70Graphics: Integrated Intel HD Graphics core GPUDisplay Output: VGA, built-in VGA pins, HDMI, LVDSMemory: 1*SO-DIMM, DDR3 1333\1066MHz, supports up to 8GBAudio: Onboard Realtek ALC662 HD audio controllerLAN: Onboard Realtek RT8111E Gigabit EthernetStorage: 2*SATAⅡExpansion Slots: 2*MINI-PCIE (for M-SATA/WIFI), 1*SIMUSB: 4*USB2.0 (rear), 4*USB2.0 (expandable)COM Ports: 6*COMRear I/O Interfaces: 4*USB2.0 ports, 1*VGA port, 1*HDMI port, 1*RJ-45 LAN port, 1*DC1*MIC-IN (microphone), 1*LINE-OUT (audio output)Internal I/O Interfaces: 1*30PIN LVDS, 1*12PIN VGA pins, 1*LPT pins, 6*COM/2*COM-SET1*4PIN SPEAKER, 1*6PIN INVERT, 2*USB2.0 pins (expandable to 4 USB ports), 1*GPIO pins, 1*PS/2 pins, 1*F-PANEL pins, 1*CLR_CMOS jumper, 1*AUTO-ON power-on auto-start jumper, 2*SATA-PWR pinsOperating Environment: -40~80°C; 0%~95% relative humidity, non-condensingWeight: Net weight (kg): 8.9kgGross weight (kg): 9.5kgDimensions: Overall dimensions (L×W×H): 485×410×63.7Installation dimensions (L×W): 455.4×380.4Software System Support: WindowsXP, Win7, Win8, Win10, Ubuntu, Centos, etc.Power Supply: DC 12VLCD Display: Type: 19.0-inch color a-Si TFT-LCDPanel Model: M190EG01 v3Resolution: 1280(RGB)×1024Display Colors: 16.7M (8-bit)Contrast Ratio: 2000:1 (Typ.) (transmissive)Viewing Angle: 89/89/89/89 (Typ.) (CR≥10) (left/right/up/down)Brightness: 400 cd/m² (Typ.)Response Time: 8.5/3.5 (Typ.) (Tr/Td) (ms)Scan Frequency: 60HzBacklight Type: LEDTouchscreen: Type: 5-wire resistive (Note: optional)Resolution: ContinuousLight Transmittance: 80%Controller: USB interfaceDurability (touch cycles): 35 millionRelative Humidity: 10~95% @ 40°C, non-condensingShock: 10 G peak acceleration (11 ms interval)Vibration: 10 GCertifications: CE, FCC, ROHS more>

$16666.6

Category: Machinery & Equipment/Engineering & Construction Machinery/Other Engineering & Construction Machinery

Company: Xuzhou Haihe Hydrological Equipment Co., Ltd.

Product Description: HZ-PY Load Cell is easy to install, simple to operate, and convenient to maintain. It calculates the load of the hoist by measuring the tension generated by the pulling force on the wire rope. more>

Negotiable

Category: Machinery & Equipment/Commercial Equipment/Display Racks

Company: Xinxiang City Hongda Vibration Equipment Co., Ltd.

Product Description: ZW Series Attached Vibrator Product Overview:The ZW series attached vibrator, also known as a concrete vibrator or cement vibrator, is widely used in various construction projects, civil buildings, dams, bridges, and the vibration of precast concrete components. Based on technical characteristics, it can be categorized into two types: standard frequency and high frequency, for users to choose from.I. Operation and Usage Methods1. Installation Method: The usage of the attached concrete vibrator generally falls into two scenarios: mobile surface vibration and fixed installation for component vibration. For surface vibration, a wooden or iron plate is attached to the bottom of the vibrator, and the vibrator is fixed onto the base plate for use. For fixed component vibration or installation on other vibrating machinery, the installation method should be determined based on design requirements. During installation, the mounting screw holes on the base plate must be accurately positioned. Misaligned holes may cause installation difficulties, severe misalignment of screws, and abnormal stress on the casing, affecting its service life. The nuts of the base plate mounting screws must be securely tightened to prevent loosening, but excessive force should be avoided to prevent damage to the casing feet. Additionally, the tightness of all four mounting screws should be consistent.2. Operation: The operation of this machine is very simple. It can be used by connecting it to a 415V power supply. During trial operation, the vibrator should not run idle for extended periods on hard, dry ground, as this may cause excessive vibration and lead to damage. When moving the vibrator during operation, ensure the four-core cable of the motor maintains a certain length and flexibility. Avoid pulling it too tightly to prevent wire breakage. During installation and operation, electrical safety measures must be observed at all times, and safety fuses should be installed in the circuit. If multiple vibrators are used simultaneously on a single component, their performance may differ from that of a single vibrator. In such cases, the frequencies of all vibrators must be consistent to avoid interference. For more complex installation and operation issues, appropriate solutions should be incorporated into the design.II. Maintenance and Inspection Methods Regular maintenance of this vibrator primarily includes the following:1. Keep the external surface of the casing clean. Prevent concrete or other materials from accumulating on the casing, as this may hinder heat dissipation.2. Handle the vibrator gently during transportation, installation, and operation to avoid impact damage. Regularly inspect the motor feet and casing for integrity. If cracks are found, take corrective measures.3. Periodically check the tightness of the base plate mounting screws, end cover fixing bolts, and terminal box screws. If any are loose, tighten them immediately (the long fixing bolts on both sides of the end cover may elongate after prolonged use). Bolts and nuts should maintain good thread conditions. During disassembly and assembly, inspect the threads; if damaged or not fitting tightly, replace them.4. Lubricate the bearings at both ends of the motor based on specific usage conditions, typically every three to six months. Use high-quality lubricant in appropriate amounts; avoid over-lubrication. It is best to remove the bearings, clean them with gasoline, dry them, and then reinstall them. To lubricate the bearings, first unscrew the nuts on the long bolts, remove the end cover, and detach the eccentric block. This allows the bearing seat cover and bearings to be removed. During disassembly and assembly, avoid damaging the mating surfaces of the bearing seat cover and casing. When reinstalling the eccentric block, ensure it is securely locked with anti-loosening wire.5. If abnormal noise, vibration, or a burning smell is detected during operation, immediately disconnect the power supply and stop the vibrator for inspection.This vibrator has a simple structure. With regular maintenance and proper operation, faults are generally rare.Below are possible faults and their repair methods: If the motor suffers mechanical damage due to overly tight wiring or careless use, wire breakage may occur. In such cases, first inspect the terminal box. If the break is inside the motor, follow standard motor circuit inspection procedures. If necessary, the entire stator may need to be pressed out for repair, requiring appropriate tools and fixtures.After prolonged use, the motor bearings may gradually wear out and require replacement. Excessive wear can cause the rotor to rub against the stator, leading to damage. In such cases, replace the bearings immediately. The bearings installed at the factory are of high precision; ensure replacement bearings are of similar quality.ZW Series Attached Vibrator Technical Parameters Table:Attached Plate VibratorModelZW-3ZW-3.5ZW-5ZW-7ZW-3ZW-3.5ZW-5ZW-7ZW-10Motor Power (kW)0.250.751.11.50.250.751.11.52.2Rated Voltage (V)220220220220380380380380380Rated Current (A)1.15.945.06.80.661.92.95.84.53Vibration Frequency (r/min)284028402840284028402840284028402840Vibrating Force (Kgf)200350500700200350500700980 more>

$120

Category: Chemicals/Organosilicon/Other Organosilicon Compounds

Company: Dongguan Hongfenghao Technology Co., Ltd.

Product Description: Anti-static pad printing silicone with excellent anti-static effect liquid silicone, 13058520516  Wang Zhanfeng, Exclusive: Hongfeng Hao wuhaipingAdvantages of anti-static pad printing silicone:1. Pad printing electronic components: capacitors, chips, circuit boards, etc. The anti-static silicone head does not generate static electricity and will not damage the internal parts of electronic components, making it particularly suitable for components that are already soldered onto circuit boards.2. Pad printing plastic sheets, metal sheets, films, etc. Using ordinary pad printing heads, the static electricity generated by squeezing will cause the sheets to stick to the head, reducing production efficiency. Using anti-static pad printing heads, which do not generate static electricity or attract products, can improve production efficiency.3. Static electricity is easily generated in winter, especially when ordinary silicone heads continuously squeeze ink and press down on products. The static electricity on the surface can attract dust and dirt to the head, reducing the transfer effect. Using anti-static pad printing silicone can effectively solve this problem. more>

$4999

Category: Vehicles & Accessories/Other Special Purpose Vehicles/Insulated Vehicles

Company: Huizhou Yuanchi New Energy Co., Ltd.

Product Description: Huizhou Yuanchi New Energy Co., Ltd. specializes in the production, research and development, and sales of lithium battery packs, which are widely used in electric three and four-wheelers, electric sightseeing cars, patrol vehicles,fire trucks, vintage cars, electric hotel linen carts, electric golf carts, electric floor scrubbers, cleaning vehicles, dust mop carts, sanitation transport vehicles,electric forklifts, lifting platforms, electric tractors, AGV smart robots, drones, agricultural machinery equipment, tracked disc vehicles, agricultural tracked farming machines, etc.As a Huizhou lithium battery manufacturer, we offer first-hand supply with quality assurance. Contact Manager Chen at 18507523932. more>

Negotiable

Category: Chemicals/Chemical Intermediates/Intermediate Compounds

Company: Shenzhen Jiashida Precision Instruments Co., Ltd.

Product Description: FPS-1   P/N 7Z02505Description: The FPS-1 is a fast optical probe designed for visualizing and measuring the temporal characteristics of laser beams within a spectral range of 193 nm to 1100 nm. It incorporates a UV-enhanced silicon PIN photodiode, engineered to convert optical signals into electrical signals, which can then be measured using third-party instruments such as oscilloscopes or spectrum analyzers for measurement purposes. The FPS-1 has a rise time of 1.5 nsec. Reverse bias voltage is supplied either by an internal battery or an external DC power source (included).Detector Type: UV-SiRise/Fall Time: 1.5 nsecSpectral Range: 193-1100 nmActive Area Diameter: 1.02 mmNoise Equivalent Power: 0.05 pW/√HzDimensions: 49 L x 61 W x 27 D (mm)Detector Area: 0.8 mm²Peak Sensitivity Wavelength: 720 nmResponsivity at Peak Wavelength: 0.45 A/WResponsivity (Irradiance) at Peak Wavelength: 0.18 V/(W/cm²)Bias Voltage: 12 VDCBias Voltage Source: External or BatteriesBandwidth: 233 MHzDark Current: 0.3 nA typ, 1.0 nA maxMaximum Average Input Power: 3 mWMounting (Threaded Hole): 1/4-20Output Connector: BNCAccessory Thread: SM-1 more>

$888.00

Category: Machinery & Equipment/Valves/Butterfly Valves

Company: Shanghai Yunlong Marine Valve Co., Ltd.

Product Description: more>

$150

Category: Consumer Electronics/Touchscreen Products/Touch Screen Products

Company: Shenzhen Bvsion Technology Co., Ltd.

Product Description:   Product Feature System Model BVS-ZR156 CPU RK3188 quad core 1.6GHz RAM/ROM 1GB/8GB(16GB/32GB optional) System Android 5.1 Display Screen 15.6 inch IPS touch screen Resolution 1920*1080 FULL HD Brightness 250-300cdm² Screen scale 16:9 Network WiFi 802.11b/g/n Ethernet Support Bluetooth Optional 3G  Support external 3G USB dongle Interface SD  Support SD card ( Max 32G ) Mini USB USB OTG USB Host x 3 USB Host 2.0 RJ-45 Network interface DC DC input Headset 3.5mm stereo headphone output Multimedia Video MPEG-1,MPEG-2,MPEG-4,H.263,H.264,VC1,RV etc Audio MP3/WMA/AAC etc. Picture jpeg, jpg Other  functions Wireless mouse Support Wireless keyboard Support Speak 3Wx2 ( Standard ), 5Wx2 ( Optional ) Camera 2MP(5M Optional) OSD Language Multi language OSD operation Software support QQ/Facebook/map/email/games and so on   SHIPMENT: 1) For sample ,by Air / DHL / Fedex / UPS / EMS 2) For bulk order ,by  sea is the best way Payment: 1) For sample ,100%T/T in advance , 2) For bulk order ,30% T/T deposit and 70%T/T before shipment More details can be discussed according to the order. Packageing: 1pc/box for sample,1 pcs/box/carton with foam,conner,or wooden case for protecting 1pc/carton, About bulk-cargo shipping, we suggest using export wooden box or pallet. Delivering time:5-7 days more>

$25

Category: Energy/Solar Energy Equipment/Other Solar Equipment

Company: Shenzhen Jinhom Solar Technology Co., Ltd

Product Description: 36W 5V Folded Flexible Solar Pack Charger with USB charging port Features:   Environmental protection, free power from the sun, go green! Easy to use, connect the USB port with your device by the power cord. High transformation efficiency, the efficiency can up to 25 percent. Fast charging time, power bank can be full charged within very short time in sunny day. Easy to carry, portable and folded packing design makes it suitable for outdoor activities. Wide application, it can be used to charge electrical devices, such as smart phone, power banks and other gadgets. The Charging temperature is -20 -70 degree centigrade. Durable, water-resistant and long lifespan. RoHS, CE and FCC certificates. Accept OEM and ODM.     Specifications:   Solar Panel: 36W / 5V Maximum Wattage: 36W Maximum Voltage: 5V Maximum Currency: 7.6A Output: USB2.0 Size: 950mm x 247mm x 3mm Net Weight: 1020g Pack: 36W Solar Pack x 1pc, Carabiners x 2pcs, Suction Cups x 4pcs more>

Negotiable

Category: Chemicals/Plastics & Products/Plastic Raw Materials

Company: Guangdong Baoke Stationery Co., Ltd.

Product Description: Product Name erasable gel pen Item No. PC3148 Brand Name BAOKE Type Gel ink pen Writing Line 0.5mm Writing Color Black,blue,red,dark blue Matetial Plastic OEM Request Yes more>

$320000

Category: Machinery & Equipment/Pipes & Fittings/Other Pipe Materials

Company: Anyang Xinheng Machine Tool Co., Ltd.

Product Description: DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines.  Highlights:  1. Our products have good rigidity. 2. 400T upsetting force can meet all kinds of requirements of drill pipe, oil pipe.  3. 256mm cavity can produce all products of oil pipe, drill pipe, drill collar.  4. The range of process diameter that can be processed from 50mm to 127mm. 5. Achieve the production automation. STEP1: HYDRAULIC UPSETTING MACHINE: Hydraulic upsetting machine is widely used in oilfield, construction, bridge and other industries, is the preferred equipment to carry out large quantities, high precision upsetting forging production, which is very suitable for round steel, steel pipe, drill pipe, sucker rod, oil pipe and other long rod forging and forming. Video1: https://youtu.be/NZ1gGOqAyQU Video2: https://youtu.be/Ql4fqtJ7juE PARAMETER:                  Name unit HM400 YPD400B Upsetting kN 4000 4000 Upsetting travel mm 800 800 Punching speed mm/s ≥ 157 ≥190 Clamping force kN 5608 5400 Upper and lower die opening degree mm 200 180 Dimensions mm 3910×3600×2360 3977×2597×2512 weight kg 21000 19000 STEP2: Intermediate frequency quenching and tempering production line : TZX series intermediate frequency quenching and tempering production line is a kind of device with a high performance product by our company. It can complete various sucker rod, oil pipe, drill pipe, drill collar, tubing and steel rod heat treatment processing. It adopts the high strength bed design, have a variety of configuration and can be chosen by the customer. The fully automatic feeding device realizes the unmanned operation of the whole production line, which greatly reduces the labor cost.   Video: https://youtu.be/NyfTDX4LaKc STEP3:PIPE THREADING LATHE QK series pipe threading lathe is also called oil country lathe, big bore lathe and hollow spindle lathe are economical CNC horizontal lathe, which are not only suitable for oil pipe thread turning, but also widely used in all works of life such as automotive, petroleum, military and other mechanical processing. The lathe has the advantages of high efficiency, low scrap rate, good consistency, etc. Video: https://youtu.be/NLN9LgBQxMI APPLICATION: The production line is suitable for processing varieties of drill pipe, drill collar, oil pipes, etc. Our service: Free replacing parts available in the warranty period. Cost price replacing parts available beyond the warranty period.  Quick action and reply for the technical questions at any time in the whole life of the machine. Overseas after service center available in some region. Engineer overseas service available on the requirement of customer(relative cost born by customer). Free design drawing, free installation, free debugging, Cheap accessories. About Us Anyang Xinheng Machine Tool Co. Ltd. is a professional machine tool manufacturer since 1946. Our factory covers an area of more than 30000 squares meters, equipped with our updated manufacturing facilities. We have LATHE, CNC LATHE, PIPE THREAD LATHE, SPHERE TURNING LATHE etc. We have attained ISO9001:2000 International Quality Control System Certification. Our products are sold both at home and abroad, and they are very popular around the world. Welcome to contact us ! Contact us Web:www.lathemachinetool.com Email:info@ayxhmt.com Tel:+86-372-3700288 more>

Negotiable

Category: Machinery & Equipment/Engineering & Construction Machinery/Other Engineering & Construction Machinery

Company: Jiangmen qiannuo machinery co., ltd.

Product Description: 1.made of stainless steel,beautiful designed,clean and healthy, movable with wheels 2.Temperature controller with micro-computer. The micro-computer can control and show the temperature 3.Casters with a self-locking device 4.Casters are changeable and removable and adustable 5.Every part is easy to clean and maintain more>