$145

Category: Chemicals/Chemical Intermediates/Intermediate Compounds

Company: 沧州德咏环保科技有限公司

Product Description: The automated feeding system for pig farms uses sensors to automatically detect the feed level in the trough. When the trough is low on feed, under microprocessor control, the feeding motor is activated to dispense feed. Once the trough is full, the sensor detects the full state, and the feeding motor stops.1. Precise control, labor savings, increased production efficiency, and reduced breeding costs.2. When applied to sow barns, it improves pregnancy turnover rates and reduces culling rates.3. Combined with quantitative cup feeding, the time required to feed sows is shortened from 60–30 minutes to just 10 seconds. The feeding process is quiet, reducing stress, miscarriages, returns to estrus, and equipment damage.4. Reduces contamination of feed and woven bags by personnel movement and rodents, keeping the feed fresh.5. When applied to nursery and growing pigs, combined with automated ad libitum feeding, it can shorten the time to market by 10–15 days and reduce costs.6. Reduces labor demands, increases worker retention, and stabilizes workforce quality.7. Promotes the strengthening of the epidemic prevention system. more>

$550

Category: Instruments & Meters/Specialized Instruments/Other Specialized Instruments

Company: 深圳市博纳德精密仪器有限公司

Product Description: Complies with the requirements of UL749 Figure 3 (SB0504A) standard, used for protection testing of dishwashers. more>

$980

Category: Electrical Equipment & Supplies/Low Voltage Electrical/Motor Starters

Company: 深圳市博纳德精密仪器有限公司

Product Description: Complies with standards:Manufactured according to Clause 20.2 of GB 4706, using a test probe similar to Type B in IEC61032, but with a circular baffle of 125mm diameter replacing the non-circular baffle.Product Overview:A test probe similar to Type B in IEC61032 is applied with a force not exceeding 5N to determine compliance. However, this test probe features a circular stop plate with a diameter of 125mm, replacing the original non-circular stop plate.For appliances with movable devices such as those that adjust belt tension, the test probe test shall be conducted with these devices adjusted to the most unfavorable positions within their adjustable range. Remove the belt if necessary.The test probe must not be able to touch hazardous moving parts.Technical Parameters:Finger diameter: 12 mmFinger length: 80mm (total length of three sections)Baffle diameter: 125mmHandle length: 100mmReference standards: GB4706.1-2005 Clause 8.1.1, IEC61032:1997 Figure 2, IEC60335-2-14, GB4706, etc. more>

$40

Category: Chemicals/Organosilicon/Silicone Rubber

Company: 东莞市鸿联有机硅科技有限公司

Product Description: RTV2 White Silicone Rubber for Large Craft Molds with Low Shrinkage RateIn the production of large craft molds, the selection of condensation-type liquid silicone (condensation-type room temperature vulcanized silicone rubber, RTV-2) is based on a comprehensive consideration of its material properties, process adaptability, and cost-effectiveness. The following analysis covers material characteristics, applicable scenarios, advantages and limitations, and key points of the manufacturing process:1. Core Characteristics of RTV2 White Silicone Rubber1. Curing Mechanism and Material CompositionComposition: Primarily consists of base gum (hydroxyl-terminated polydimethylsiloxane), crosslinker (such as ethyl silicate), catalyst (tin compounds like stannous octoate), and filler (such as fumed silica).Curing Method: Crosslinking is achieved through a condensation reaction, releasing small molecule byproducts like ethanol during the curing process. No heating is required; it cures at room temperature.Typical Parameters: Mixing ratio: base gum: crosslinker: catalyst = 100:2-5:0.5-2Pot life: 20-60 minutes (affected by temperature; higher temperatures accelerate curing).Full curing time: 24-48 hours (at room temperature, 25°C).For inquiries about RTV2 White Silicone Rubber, contact Ms. Chen at 13662816580 more>

$40

Category: Chemicals/Plastics & Products/Plastic Heat Stabilizers

Company: 东莞市鸿联有机硅科技有限公司

Product Description: Milky White Industrial Grade Mold Silicone with High Tear Strength for DIY Manual Operation. Contact the factory for inquiries: 13662816580 (same number for WeChat).Usage InstructionsPreparation: Clean the surface of the object to be molded, ensuring it is free from oil, dust, and other impurities to guarantee good adhesion between the silicone and the object's surface.Mixing Components: Depending on the type of liquid mold silicone, mix Component A (silicone) and Component B (curing agent) in the specified ratio. Typically, addition-cure silicone has a 1:1 ratio, while condensation-cure silicone has a ratio of 100:2-3. Use a stirring tool to mix thoroughly, ensuring complete integration of both components.Vacuum Degassing: After thoroughly mixing the silicone and curing agent, perform vacuum degassing to remove air introduced during mixing. The vacuum time should not be too long; normally, do not exceed ten minutes to avoid degrading the silicone's performance due to excessive degassing.Brushing or Pouring: Apply the degassed silicone onto the object by brushing or pouring. If brushing, ensure an even coat, avoiding uneven thickness or missed spots. For larger or more complex molds, after brushing one layer of silicone, apply a layer of gauze fiber cloth to enhance the silicone's strength and tensile properties. Then brush another layer of silicone and apply another layer of gauze fiber cloth, repeating this process about twice.Making the Outer Mold: To enhance the mold's stability and durability, an outer mold is usually necessary. A common method is to surround the mold with plastic or wooden boards and then pour materials like plaster or resin. Alternatively, a resin brushing method can be used: brush a layer of resin, apply a layer of fiberglass cloth, then brush and apply again, repeating two to three layers to complete the outer mold.Curing and Molding: After completing the above steps, allow the silicone to cure naturally at room temperature or apply heat if needed. The curing time varies based on the type of silicone, ambient temperature, humidity, and other factors, generally ranging from a few hours to several dozen hours. Once the silicone is fully cured, the desired mold is obtained. more>

$60

Category: Chemicals/Ink/Letterpress Inks

Company: 东莞市鸿联有机硅科技有限公司

Product Description: Ceramic pad printing ink is a material used in the pad printing process. The general usage method is as follows:Proportionally mix the ceramic pad printing ink: According to the product instructions, accurately weigh the amounts of Component A and Component B, typically in a 10:1 ratio. For example, take equal weights of Component A and Component B and place them in a clean container.Thorough stirring: Use a stirring rod or an electric mixer to mix Components A and B thoroughly. The stirring time is generally 3-5 minutes to ensure complete integration of the two components, with no noticeable color differences or unmixed portions. Avoid stirring too quickly to prevent excessive bubbles.For more methods on using ceramic pad printing ink, contact Ms. Chen at 13662816580 (same number for WeChat). more>

$65

Category: Chemicals/Phenols/Hydroquinone

Company: 河南路彩建筑工程有限公司

Product Description: Product Advantages: Aesthetic, durable, short construction period, the entire pavement can be formed in one go (cast-in-place tactile paving can be directly laid on the finished pavement, avoiding the hassle of secondary paving typically caused by traditional tactile paving bricks), significantly reducing pavement construction costs and material waste. Various colors and styles are available for flexible matching.Product Description: Polymer cast-in-place diamond tactile paving is a continuous tactile paving system made on existing pavement using inorganic high-strength polymer materials and specialized molds, available in two types: guiding strips and guiding dots. Standard widths are 300mm, 400mm, 500mm, and 600mm, with flexible customization based on actual needs. It forms a permanent bond with asphalt concrete or cement concrete base layers, offering wear resistance, slip resistance, stain resistance, and synchronous expansion and contraction with asphalt pavement.II. Construction Process and Operating MethodsPolymer cast-in-place diamond tactile paving is a new tactile paving technology that can be constructed on-site on traditional black asphalt concrete and gray cement concrete pavements.2.1 Construction ProcessBase layer inspection - Base layer cleaning and treatment - Layout marking - Tape application - Base leveling and mortar spreading - Mold placement - Filling with diamond tactile paving mortar - Leveling and finishing - Curing to specified time - Surface cleaning - Application of sealant for surface sealing - Drying and curing - Inspection - Opening to traffic - Final acceptance.2.2 Construction Equipment and ToolsThe diamond tactile paving construction process is relatively simple, requiring only the following equipment and tools: one mixer, one disperser, several tactile paving molds, one material transport vehicle, rolling rollers, specialized serrated rubber screeds and flat rubber screeds, one powerful blower, one generator, brooms, and other general equipment and tools.2.3 Construction PersonnelOne team leader and 5-6 construction workers per group.2.4 Construction Preparation4.1 Review drawings and layout markingCarefully review construction drawings and verify positions on-site one by one; if necessary, mark points and apply tape.4.2 Material inspectionPolymer cast-in-place diamond tactile paving is an on-site, multi-step, multi-material coordinated construction system. Before construction, check the consistency of materials and compatibility among various materials. Emulsion materials should show no significant skinning, clumping, or abnormalities; powder materials should be free of clumps. 2.4.3 Trial mixing and sample preparationDifferent base layers and environments can affect the curing time of polymer diamond tactile paving. Therefore, before formal construction, conduct on-site trials strictly according to the mix ratio and method set for batch operations. Proceed with batch operations only after ensuring no obvious defects in curing.2.4.4 Base layer conditions and treatmentThe base layer should be solid and clean. Asphalt concrete pavement should be free of bleeding, loose dust, delamination, or aggregate loss.For cement concrete pavement with strength below C25, the surface should be treated by milling, scabbling, grinding, sandblasting, or roughening (for new concrete), preferably exposing the aggregate over a large area. Additionally, apply 1-2 coats of PM-101 penetrating sealant for sealing treatment.Clean, dry asphalt pavement in good functional condition does not require sealing treatment. more>

$16000

Category: Machinery & Equipment/Industrial Control Systems/Other Industrial Control Systems

Company: 天津新诺仪器科技有限公司

Product Description: DYP-30TS Four-Column Series Electric Powder Tablet PressProduct Introduction:The DYP four-column series electric powder press is widely used in fields such as new materials, superconductors, powder ceramics, new power sources, batteries, building materials, and metallurgical powders. It can be used in conjunction with calcium-iron analyzers, infrared spectroscopy (IR), and X-ray fluorescence (XRF) analytical instruments. The machine features a compact structure, light weight, fast pressure buildup, and simple, convenient operation. By selecting specific tablet molds, it can press powder materials such as potassium bromide (KBr), sodium chloride (NaCl), and cement into various test pieces, cylinders, special-shaped bodies, or composite bodies for analysis and research. Additionally, this machine is suitable for other applications requiring corresponding pressure, serving as a press to test the compressive strength of various objects, among other uses.DYP-20TS Model:ModelDYP-20TSDYP-30TSDYP-40TSDYP-60TFSPressure Range0-20T (0-28MPa)0-30T (0-31.5MPa)0-40T (0-30MPa)0-60T (0-34MPa)Piston DiameterΦ95mm chrome-plated cylinderΦ110mm chrome-plated cylinderΦ130mm chrome-plated cylinderΦ150mm chrome-plated cylinderPiston Stroke30mm40mm50mm50mmPressure GaugeDigital display, range 0.0-40.0MPa, accuracy 0.1MPaPressure Stability≤1MPa/10minPressurization MethodElectric pressurization / Manual pressurizationPressure Compensation MethodAutomatic pressure compensation / Manual pressure compensation / Manual slow pressurizationOverall StructureIntegrated structure, no sealed connections, reducing oil leakage pointsPower Supply220V (50Hz/60Hz)Protective CoverNoneNoneNoneYesWorktable DiameterФ105mmФ120mmФ140mmФ160mmWorking Space80×150mm92×160mm115×185mm185×250mmDimensions245×415×415mm275×430×420mm295×450×500mm405×470×565mmWeight58kg72kg92kg140kgNoteModels with "F" include an acrylic protective cover. The "F" protective function can be added, and the working space can be increased in height.Note: The working space can be custom-made to increase height. Special tablet presses can be customized according to customer requirements.Tablet Press Operation Steps: more>

$8000

Category: Others

Company: 天津新诺仪器科技有限公司

Product Description: SYP-30T Manual Powder Tablet Press (30 Ton, Dial Pressure Gauge)Product Introduction:The SYP-30T manual powder tablet press is widely used in new materials, superconductors, powder ceramics, new power sources, batteries, building materials, metallurgical powders, and other fields. It can be paired with calcium-iron analyzers, infrared spectroscopy (IR), and X-ray fluorescence (XRF) analytical instruments. This machine features a compact structure, small size, fast pressure generation, simple operation, easy cleaning, and convenience. It can press powder materials such as potassium bromide (KBr) and sodium chloride (NaCl) into various test pieces, cylinders, special-shaped bodies, or combined forms for analysis and research using specific molds. It is also suitable for other applications requiring corresponding pressure, serving as a press to test and analyze the pressure resistance of various objects, making it highly versatile.SYP-30T Tablet Press Technical Parameters:ModelSYP-30TSYP-30TSSYP-30TFSYP-30TFSModel SelectionDial Pressure GaugeDigital Pressure GaugeDial Gauge + ProtectionDigital Gauge + ProtectionDial Pressure GaugeDial type, dual-scale display for pressure and pressure intensity (only for models without "S")Digital Pressure GaugeDigital display 0.00-40.00MPa, accuracy 0.01MPa (only for models with "S")Pressure Range0-30T (0-31.5MPa)Piston DiameterΦ110mm chrome-plated oil cylinderPiston Stroke40mmPressurization MethodManual pressurization / manual slow pressurizationPressure Stability≤1MPa/10minOverall StructureIntegrated structure, no sealed connections, reducing oil leakage pointsWorktable DiameterФ120mmNumber of ColumnsFour columnsProtection FunctionNoneWith acrylic protective coverWorking Space92×160mm (width/height)120×160mm (width/height)Overall Dimensions275×195×420mm (L×W×H)305×195×425mm (L×W×H)Instrument Weight56kg65kgRemarksModels with "F" include an acrylic protective cover; models with "S" include a digital pressure gauge; working space can be customized for increased heightTablet Press Analysis Diagram and Operating Steps: more>

$60

Category: Construction & Building Materials/Glass/Processed Glass

Company: 中山市新兆光电技术有限公司

Product Description: Cover glass is a type of high-strength, high-transmittance protective glass widely used on the outermost layer of displays for electronic products such as smartphones, tablets, vehicle-mounted displays, and industrial control systems. It serves to protect the internal display modules and touch modules. It is typically made from high-alumina silicate glass (such as Corning Gorilla, Schott, NEG, etc.) or soda-lime glass as the base material, and undergoes multiple precision processes including CNC engraving, hot bending, tempering, AF/AR/AG coating, screen printing, ultrasonic cleaning, etc.Core Features of Cover Glass:High transmittance (≥91%), restoring true colorsHigh hardness (Mohs hardness ≥6H, up to 9H after tempering), scratch and wear-resistantStrong impact resistance (ball drop impact ≥0.5J, steel ball 64g@130cm)Touch sensitivity, compatible with various touch solutions such as capacitive, infrared, and electromagneticCustomizable (2D/2.5D/3D structures, thickness 0.2-8mm, openings/irregular shapes/step shapes/hot bending)Surface functional coatings (AF anti-fingerprint, AR anti-reflection, AG anti-glare, AS antibacterial, DLC ultra-hard)Application Scenarios:Mobile phones, tablets, vehicle-mounted central control systems, industrial control equipment, smart home devices, medical equipment, security monitoring, financial POS terminals, educational electronics, outdoor displays, etc. more>

$90

Category: Instruments & Meters/Optical Instruments/Optical Filters

Company: 中山市新兆光电技术有限公司

Product Description: The 635nm bandpass filter, as a precision optical component, has its core parameters determining the filtering performance within a specific wavelength range. The central wavelength can be controlled at 635±2nm, ensuring precise transmission of the target red light band. In terms of transmittance, the product achieves a transmittance of T>91%, and its high transmittance characteristic effectively reduces the loss of the target light signal. There are slight differences in the half-bandwidth parameter, and the bandwidth selection needs to be comprehensively considered based on the wavelength range of the light source and anti-interference requirements. The blocking bands cover 400nm-610nm and 670nm-1100nm, with a blocking rate requirement of T91%), excellent smoothness, small thickness tolerance (±0.1mm), and good flatness, providing a foundation for high-precision optical performance.Coating Process: Ion sputtering coating technology is implemented using imported equipment, giving the coating advantages such as high durability (adhesion ≥5N), good spectral uniformity (±2nm), and strong central wavelength stability (temperature drift more>

$88888

Category: Instruments & Meters/Specialized Instruments/Other Specialized Instruments

Company: 北京阿尔泰科技发展有限公司

Product Description: Brand: Art TechnologyModel: PCIe8620Product Overview:The PCIe8620 data acquisition card features a sampling frequency of 250KS/s, 12-bit 16-channel analog acquisition, with DA, DIO, and counter functions.Main application scenarios include: wireless communication, radar/sonar, ultrasound, and graphic imaging.Specifications:Contact: 15600362816, 15910369641Official Store: https://art-control.taobao.com more>

$9500

Category: Others

Company: 北京阿尔泰科技发展有限公司

Product Description: Brand: Altai TechnologyModel: USB2861Product Overview:USB2861 is a USB multifunctional industrial-grade data acquisition cardAD: 64 channels, 250KHz, 16-bitDA: 4 channels synchronous output, 14-bit, 1MHz24 channels DI/O (8 buffered DIO, 16 multifunctional DIO);4 channels 32-bit multifunctional counters, supporting edge counting, frequency measurement, period measurement, half-period measurement, pulse width measurement, dual-edge interval measurement, linear position measurement, angular position measurement, and pulse output. Suitable for a wide range of applications from basic data acquisition to closed-loop control and test automation.Features:1. Based on USB3.0 bus Super Speed Stream transmission technology, significantly improving data transmission stability, speed, and real-time performance.2. Device-side USB interface Lock method greatly reduces the probability of disconnection due to loose USB connections.3. Each function of the acquisition card supports buffered sampling. Unique hardware and software technologies ensure stable, reliable, and independent operation of all functions on the Windows system without interference.4. The board has very low power consumption and supports adaptive switching between USB bus power supply and 5~24V wide-range external power supply, facilitating mobile field measurements based on laptops.5. Supports 5V 200mA power output with overload protection, capable of directly powering sensors such as proximity switches and encoders.6. Built-in high-performance, high-isolation terminal board for convenient user wiring.7. Supports DIN rail installation.Product Specifications:Connector OptionsUSB2861 is the version with built-in terminal blocksUSB2861-V is the version with a 68-pin connector outputProduct OverviewBus TypeUSB3.0 Super SpeedOperating SystemXP, Win7, Win8, Win10Product GradeIndustrial GradeAI Analog InputResolution16-bitSampling Range±10V, ±5V, ±2V, ±1VMax Sampling Rate250KspsNumber of Channels64 channels (RSE, NRSE); 32 channels (DIFF)Channel Scanning ModeAsynchronous cyclic scanningAcquisition ModeOn-demand single-point sampling, finite-point sampling, continuous samplingMemory Depth4K-point FIFO memoryTrigger SourceSoftware forced trigger, start trigger, pause triggerAO Analog OutputNumber of Channels4 channelsMax Output Rate1MspsResolution14-bitOutput Range±10V, ±5VDrive Capability5mAMemory Depth4K-point FIFO memoryChannel Output ModeSynchronous outputGeneration ModeSingle-point (on-demand) sampling, finite-point sampling, continuous samplingCTR CounterNumber of Channels4 independent multifunctional countersCounter Bits32-bitElectrical StandardTTL levelCounter FunctionsEdge counting, pulse width measurement, frequency/period measurement, half-period measurement,dual-edge interval measurement, linear position measurement, angular position measurement, programmable pulse outputAcquisition ModeOn-demand single-point sampling, finite-point sampling, continuous samplingMemory Depth2K-point FIFO memoryDI/ONumber of Channels24 channels DI/O: Port0 8 channels, Port1 and Port2 each 8 channels multiplexed with PFIConfiguration MethodProgram-controlled I/O direction and statusInput Range Up To0V～5VElectrical StandardTTL levelSampling ModeOn-demand single-point sampling, finite-point sampling, continuous samplingMemory Depth2K-point FIFOInput Rate10MHzInput Impedance1MΩOutput Rate10MHzSingle-Channel DriveCapability Up To-20mA @Source current25mA @Sink current+5V OutputOutput Voltage+5.0V ± 0.2VLoad Capacity200mALoad Regulation3.3%Other ProtectionAutomatic protection after overloadSoftware SwitchSupportedEngineer Cai: 15600362816, 15910369641 more>

$0.25

Category: Others

Company: 安阳市飞龙药业有限责任公司

Product Description:        The pointed-tip aluminum-plastic ointment tube, meticulously developed by Feilong Pharmaceutical, is designed for precise dosage control and accurate application to the targeted area. Its core design philosophy revolves around "safety and hygiene" as well as "convenience and efficiency." The compact size makes it easy to carry, fitting effortlessly into home medicine cabinets, travel bags, or small pouches without taking up much space. With flexible capacity options, it can be customized for any volume up to 20ml, meeting the needs of different medication dosages while avoiding waste, reflecting the rational use of resources.        Safety and hygiene are the lifelines of medical products. Feilong Pharmaceutical's dropper-style aluminum-plastic ointment tube uses high-quality aluminum-plastic materials to effectively block external contamination, ensuring the purity and stability of the medication inside. The single-use design fundamentally eliminates the risk of cross-infection, providing reliable protection whether used for human or pet treatment and care. Especially in the context of growing global public health awareness, such a design is particularly important.       The pointed-tip design not only allows for the attachment of a trumpet cap, giving the tube a more elegant and upscale appearance, but also ensures more precise extrusion of the ointment due to its narrow tip. The small aperture allows for more accurate application to the targeted area.       Anyang Feilong's aluminum-plastic ointment tube—a small packaging solution for ointments and creams—will make your product stand out. more>

$2900

Category: Machinery & Equipment/Food & Beverage Processing Equipment/Snack Food Processing Equipment

Company: 科迈尔智能装备（山东）有限公司

Product Description: Manual Boot WasherThe dimensions of the two-station handheld boot washer we offer are 1200*630*11201. The entire machine is made of SUS304 stainless steel.2. The handheld brush boot washer features a multi-functional valve for freely switching between detergent and clean water. The handheld brush has an internal water spray design, allowing simultaneous brushing and rinsing, making it suitable for cleaning various styles of boots. This boot washer adopts a food-grade sanitary design with a large tilt drainage design, making it easier to clean and meeting high hygiene standards. It effectively tackles the cleaning of heavily soiled long boots.3. The handheld brush has a switch button on the back. After opening the multi-functional valve, press the switch on the back of the handheld brush to start cleaning. Press it again to stop cleaning.4. The switch on one side of the device: arrow pointing upward indicates the device is off. Arrow pointing right indicates clean water cleaning. Arrow pointing left indicates cleaning with mixed disinfectant.5. Both the boot sole and side can be cleaned on the sole brush.6. Daily maintenance in the later stageThe simple brush cleaning machine is easy to maintain. Just rinse key parts with clean water; clean the sole brush and handheld brush at least once daily for brush maintenance; the cleaning solution filter needs simple surface cleaning with water daily.The entire machine is made of SUS304 stainless steel, complying with GMP/HACCP certification requirements;The handheld brush boot washer features a multi-functional valve for freely switching between detergent and clean water. The handheld brush has an internal water spraydesign, allowing simultaneous brushing and rinsing, making it suitable for cleaning various styles of boots. This boot washeradopts a food-grade sanitary design with a large tilt drainage design, making it easier to clean and meeting high hygiene standards. It effectively solvesthe cleaning of heavily soiled long boots.All accessories are food-grade.II. Equipment Parameters:Model-- RBC-01-H2BDimensions 1200*630*1120mmProtection Rating IP65Function Boot sole and upper cleaning and disinfectionFoot-operated brush (140mm*260mm)*2Water inlet interface 1/2" external threadDrain outlet—— Φ32mmWater consumption Continuous typeMaterial 304 stainless steel more>

$4500

Category: Machinery & Equipment/Food & Beverage Processing Equipment/Snack Food Processing Equipment

Company: 科迈尔智能装备（山东）有限公司

Product Description: The dimensions of the two-station handheld boot washer we hold are 1200*630*11201. The entire machine is made of SUS304 stainless steel.2. The handheld brush boot washer features a multifunctional valve for freely switching between detergent and clean water. The handheld brush has an internal water spray design, allowing simultaneous brushing and rinsing, making it suitable for cleaning various styles of boots. This boot washer adopts a food-grade sanitary design with a large tilt drainage system, making it easier to clean and meeting high hygiene standards. It effectively tackles the cleaning of heavily soiled long boots.3. The handheld brush has a switch button on the back. After opening the multifunctional valve, press the switch on the back of the handheld brush to start cleaning. Press it again to stop cleaning.4. The switch on the side of the device: an upward arrow indicates the device is off. An arrow pointing to the right indicates clean water cleaning. An arrow pointing to the left indicates cleaning with a mixed disinfectant solution.5. Both the sole and the side of the boot can be cleaned on the sole brush.6. Daily maintenance in the later stages. more>

$100

Category: Chemicals/Chemical Intermediates/Intermediate Compounds

Company: 深圳市亿海龙工业设备有限公司

Product Description:        Beam-type combination shelving, heavy-duty beam shelving, high-quality supply, customizable. Mezzanine shelving, flow rack shelving, deck shelving, heavy-duty cantilever shelving, intelligent telescopic shelving. Various specifications and styles available. Welcome to call for consultation, hotline: 13073095732, Mr. Zheng       The functions and roles of storage shelving are as follows. Huadu storage shelving is a rack structure that can fully utilize warehouse space, improve storage capacity utilization, and expand storage capacity. It ensures the integrity of the materials themselves, reducing cargo loss. Goods stored in Huadu storage shelving do not squeeze each other, resulting in minimal material loss. Goods in Huadu storage shelving are easy to access, facilitating inventory counting and measurement, enabling first-in-first-out. Storage goods can be protected against moisture, dust, theft, and damage to improve material storage quality. The structure and functions of many new Huadu storage shelving systems are conducive to the mechanization and automation of warehouse management.Features of ShelvingShelving provides maximum storage capacity with minimal space. Suitable for large warehouses. Ideal for storing large quantities of low-variety goods and batch operations. It is applicable for storing large quantities of low-variety goods. Can be widely used in assembling light-duty racks, workbenches, tool carts, suspension systems, counterbalanced forklifts, or stackers. Forklifts can directly drive into the aisles to access goods, making operations extremely convenient. Shelving wholesale market demand: Features of counterbalanced forklifts or stacker shelving: Suitable for storage with low inventory turnover; can increase selectivity by 20%-30%; used for warehouses with low picking rates. Ground: 60%, relatively high (requires calculation based on the above design). It is the most popular and economical form of shelving in the market, safe and convenient, suitable for various warehouses, allowing direct access to goods. Equipment requirements: Light-duty shelving wholesale market: Light-duty punched shelving is a highly versatile structural system; stackers can increase ground space utilization by 30%, with operating heights exceeding 16 meters; this type of shelving wholesale market is typically used in expensive storage spaces, such as cold storage warehouses. Widely used in enterprise warehouses and institutions. Medium-duty shelving wholesale market: Medium-duty shelving has a unique design, reasonable structure, and is sturdy. Gravity shelving wholesale market allows for arbitrary assembly, adjustment, and reinstallation with screws; can use wooden boards, patterned plates, and other materials as flooring; can be flexibly designed into two or multiple levels, suitable for hardware tools. Electronic equipment, mechanical parts, and other small packaged items storage, meeting both well-planned and emergency usage needs. We offer free on-site measurement, planning, design, and production of products suitable for you. Welcome to call for consultation: 13073095732, Mr. Zheng more>

$1000

Category: Chemicals/Chemical Intermediates/Intermediate Compounds

Company: 海盐金溢绢纺有限责任公司

Product Description: Mulberry silk raw degummed boiled silk white filature silk thread 20/22D 30/33D 40/44D White filature silk, also known as mulberry silk, is a type of silk and a high-grade variety of mulberry silk. It is a continuous long fiber formed by the solidification of the silk liquid secreted by silkworms when spinning cocoons. Before processing, it is called "raw silk," which has a slightly stiff texture and is semi-transparent. After refining and degumming, it becomes soft and glossy, at which point it is referred to as "boiled silk."Yu Yaping  13758365028Zhong Bo 13706832167 more>

$80

Category: Electrical Equipment & Supplies/Electric Motors/Specialty Motors

Company: 新乡市宏达振动设备有限责任公司

Product Description: Product DescriptionThe SZF linear screen is a commonly used enclosed light-duty vibrating screening equipment. It utilizes a vibration motor as the vibration source, causing materials to move forward in a jumping linear motion on the screen surface. Materials are evenly fed into the inlet of the screening machine from the feeder and are separated into several specifications of oversize and undersize particles through multiple layers of screens, which are discharged from their respective outlets.Scope of ApplicationSuitable for screening various dry powdered materials with a particle size of 0.074–5mm, moisture content less than 70%, and non-viscous properties. The maximum feed particle size generally does not exceed 10mm. This series of vibrating screens can also be used for liquid filtration and screening operations, commonly applied in wastewater treatment. It can also screen larger granular materials such as coal powder. When processing larger materials, the screen body thickness needs to be increased, the motor power must be enhanced, and perforated screen plates should be used as screens. Widely used in industries such as plastics, abrasives, chemicals, pharmaceuticals, building materials, food, carbon, and fertilizers. more>

Negotiable

Category: Machinery & Equipment/Other Industry-Specific Equipment/Impregnated Paper Production Lines

Company: 山东宏力天扬环保科技有限公司

Product Description: In terms of the form of the collector, it is divided into a vacuum tube header-type collection and distribution system and a flat plate collection and distribution system. This refers to a system where the collectors are uniformly installed on the roof, each household is equipped with a water tank with an internal heat exchanger, and the water in the tank is heated through circulation pipes.The advantages of this system are: the collectors are installed on the roof, providing good lighting effects. Additionally, it does not occupy the south wall facade, which is beneficial for the wall structure and exterior appearance. This circulation design follows the same principle as heating systems and is a standard design in HVAC, making it easy to produce drawings.The disadvantages of this system are that at a minimum, one unit requires one circulation system, or it can be designed with several units sharing one system. This prevents independent control, meaning even if only a few households are occupied, the entire system must be fully operational, leading to energy and operational waste. Additionally, the long circulation pipes result in significant waste. Moreover, operating the circulation pump requires energy and incurs operational costs. more>