Toocle find for you 169 information about the https://miraridoctor.com/, total 9 pages
50ZSP-39 or 50ZSD-39 Chrome Slag Pump Impeller
Negotiable
Category: Machinery & Equipment/Compression & Separation Equipment/Oxygen Generation Equipment
Company: 自贡自泵球阀水泵有限公司
Product Description: 自贡自泵工业泵水泵50ZSP-39或50ZSD-39卧式泥浆泵渣浆泵脱硫泵配件叶轮护套以下产品价格及运费仅供参考,以实际报价为准。该产品为定制机械产品,发货时间,以双方协商为准。渣浆泵Cr26护套  渣浆泵CR26前护板渣浆泵CR26后护板    more>
Send Inquiry

150D30 or D155-30 Multistage Pump Balance Disc Gland
Negotiable
Category: Machinery & Equipment/Compression & Separation Equipment/Explosion-Proof Air Compressors
Company: 自贡自泵球阀水泵有限公司
Product Description: 自贡150D30或D155-30多级离心泵轴套轴承挡套平衡环盘填料压盖等配件以下价格(铸铁HT材质)仅供参考,不同型号不同材质的价格有所不同,同时该产品为定制产品,有一个生产周期,交货期也有所不同。因此具体型号的价格和货期,请来电咨询。下述配件可用于卧式多级离心泵泵型:150D-30x3, 150D-30x4, 150D-30x5, 150D -30x6, 150D-30x7, 150D -30x8, 150D -30x9, 150D -30x10D155-30x3,D155-30x4, D155-30x5, D155-30x6, D155-30x7, D155-30x8, D155-30x9, D155-30x10卧式多级离心泵150D30(D155-30)的常用配件如下(材质HT):进水段出水段 中段 轴承体尾盖 叶轮 轴套平衡盘 平衡环 平衡环套 more>
Send Inquiry

200S42 or 8SH-13 double suction pump centrifugal impeller
Negotiable
Category: Machinery & Equipment/Compression & Separation Equipment/Portable Air Compressors
Company: 自贡自泵球阀水泵有限公司
Product Description: 自贡自泵水泵200S42或8SH-13双吸泵离心泵叶轮轴套轴承挡套所列价格为参考价格,不同型号不同材质的价格有所不同,同时该产品为定制产品,有一个生产周期,交货期也有所不同。因此具体型号的价格和货期,请来电咨询。轴套 轴 叶轮 双吸密封环 泵体 泵盖 泵联轴器 电联轴器 轴承挡套 轴承体 轴承压盖填料环 填料压盖 圆螺母ZS型双吸泵:从电机方向看,泵为顺时针旋转。ZSH型双吸泵:从电机方向看,泵为逆时针旋转。密封形式:填料密封或机械密封可供选择。供货单位:自贡自泵球阀水泵有限公司ZIPO VALVE & PUMP CO., LTD more>
Send Inquiry

ZST or ZSJ Wear-Resistant Desulfurization Pump Slurry Pump
Negotiable
Category: Machinery & Equipment/Compression & Separation Equipment/Liquefaction Equipment
Company: 自贡自泵球阀水泵有限公司
Product Description: Zigong Zipump Industrial Slurry Pump ZST or ZSJ Wear-Resistant Desulfurization Pump Gypsum Filtrate Drainage PumpOnline Service: WEIXIN: 180 (8165) 9672 or zipo2019; Q: 219(141)7589Before consulting or purchasing products, users are requested to provide accurate parameters such as flow rate, head, pipeline loss, medium specific gravity, motor power, etc. The above prices are reference prices (pump head only, excluding motor), and prices vary for different models. Additionally, this product is custom-made with a production cycle, and delivery times also vary. Therefore, for specific model prices and delivery schedules, please call for consultation.ZST ZSJ desulfurization slurry pumps serve as desulfurization pumps in thermal power plants: such as gypsum slurry discharge pumps, filtrate pumps, overflow pumps, limestone slurry pumps, drainage pit pumps, etc., for conveying liquids containing solids and slurries.ZT desulfurization slurry pump features optimized design, easy disassembly, low power consumption, a variety of wear-resistant materials, wide applicability to working conditions, multi-point weak signal control, stable operation, multiple speed regulation options such as frequency conversion, hydraulic, and pulley drive, no leakage or dripping, clean on-site environment, energy-saving, and environmental protection.ZST ZSJ type desulfurization slurry pumps mainly consist of: cast iron HT pump body and cover, wear-resistant alloy sleeves, front and rear guard plates, wear-resistant alloy impeller, wear-resistant alloy packing chamber or mechanical seal chamber, wear-resistant alloy mechanical seal auxiliary impeller or wear-resistant alloy packing auxiliary impeller, stainless steel alloy cartridge mechanical seal, cast iron HT bearing body and bracket.Common ZST type desulfurization pump models50ZST-33, 50ZST-46, 80ZST-33, 80ZST-36, 80ZST-39, 80ZST-42, 80ZST-52, 100ZST-33, 100ZST-36, 100ZST-39, 100ZST-42, 100ZST-46, 100ZST-50, 150ZST-42, 150ZST-45, 150ZST48, 150ZST-50, 150ZST-55, 150ZST-58, 150ZST-60, 150ZST-63, 150ZST-65, 150ZST-70, 150ZST-74, 150ZST-78, 200ZST-48, 200ZST-53, 200ZST-58, 200ZST-60, 200ZST-63, 200ZST-65, 200SZST-70, 250ZST-55, 250SZST-60, 250SZST-70, 250ZST-80, 300ZST series, 400ZST series, 450ZST series.Common materials: Chromium Cr26 material, Chromium Cr30 material, CD4MCu materialSupplier: Zigong Zipump Ball Valve Pump Co., Ltd. ZIPO VALVE & PUMP CO., LTD more>
Send Inquiry

1,1-dimethylethyl 4(or 5)-chloro-2-methylcyclohexanecarboxylate
Negotiable
Category: Chemicals/Chemical Intermediates/Intermediate Compounds
Company: 南通嘉星泰生物科技有限公司
Product Description: CAS NO:12002-53-8EC NO:234-416-0Molecular Formula:C12H21ClO2Molecular Weight:232.7469Synonyms:Trimedlure;4-(or 5)Chloro-2-methylcyclohexanecarboxylic acid, 1,1-dimethyl ester;AI3-31560;Capilure;ENT 31560;EPA Pesticide Chemical Code 112603;Pherocon MFF;t-Butyl 4(or 5)-chloro-2-methylcyclohexanecarboxylate;1,1-Dimethylethyl 4(or 5)-chloro-2-methylcyclohexanecarboxylate;Cyclohexanecarboxylic acid, 4(or 5)-chloro-2-methyl-, 1,1-dimethylethyl ester;Cyclohexanecarboxylic acid, 4-(or 5)-chloro-2-methyl-, tert-butyl ester;tert-butyl 4-chloro-2-methylcyclohexanecarboxylate;tert-butyl (1R,2R)-4-chloro-2-methylcyclohexanecarboxylate;Molecular Structure: more>
Send Inquiry

[GD]888 8 Hole coin hopper counter changer for arcade jamma slot game or vending machine sorters
$11
Category: Machinery & Equipment/Packaging Related Equipment/Filling Machinery
Company: Zhejiang GangDu Electronic Co.,Ltd
Product Description: [GD]888 8 Hole coin hopper counter changer[GD]888 8 Hole coin hopper counter changer  for arcade jamma slot game or vending machine sorters GD888 8 Hole coin hopper counter for arcade jamma slot game or vending machine sorters    1. Product: Game machine coin hopper . 2. Coin Diameter: 19mm~26.5mm. 3. Coin Thickness: 1mm~3mm. 4. Coin speed: 8-12 pcs per second.         Place of Origin: China (Mainland) Brand Name: GANGDU Type: Coin changer hopper, coin counter, coin motor & Game Controllers Model Number: 888   1) Anti-jam design with patented technology 2) Reliable fast payout  3) Two layers rotator built for long operation 4) Wide range coin size.truly global 5) Low position coin exit allows closet installation of the hoppers 6) Reliable optical sensors 7) Support both metal coins and non-metal tokens 8) Automatically restore from the failure under the intelligent control  9) Easy to replace worn parts   2) 1.Game machine coin hopper . 2.Coin Diameter: 19mm~26.5mm. 3.Coin Thickness: 1mm~3mm. 4.Coin speed: 8-12 pcs per second. Packaging Details  Unit Type:piece Package Weight:3.9kg (8.598lb.) Package Size:30cm x 25cm x 28cm (11.81in x 9.84in x 11.02in)   Description A.Top class/quality products. B.100% quality guarantee before shipment. C.Professional original manufacturer/ highest trust. D.Super offer based on quantity item. E.Guaranteed delivery time. F.Standerd packing team. G.Experienced overseas sales team. H.Higher offer request than customers' request. I.Professional team offer high quality service. J.7X24 hous customers' support.  for arcade jamma slot game or vending machine sorters GD888 8 Hole coin hopper counter for arcade jamma slot game or vending machine sorters    1. Product: Game machine coin hopper . 2. Coin Diameter: 19mm~26.5mm. 3. Coin Thickness: 1mm~3mm. 4. Coin speed: 8-12 pcs per second.         Place of Origin: China (Mainland) Brand Name: GANGDU Type: Coin changer hopper, coin counter, coin motor & Game Controllers Model Number: 888   1) Anti-jam design with patented technology 2) Reliable fast payout  3) Two layers rotator built for long operation 4) Wide range coin size.truly global 5) Low position coin exit allows closet installation of the hoppers 6) Reliable optical sensors 7) Support both metal coins and non-metal tokens 8) Automatically restore from the failure under the intelligent control  9) Easy to replace worn parts   2) 1.Game machine coin hopper . 2.Coin Diameter: 19mm~26.5mm. 3.Coin Thickness: 1mm~3mm. 4.Coin speed: 8-12 pcs per second. Packaging Details  Unit Type:piece Package Weight:3.9kg (8.598lb.) Package Size:30cm x 25cm x 28cm (11.81in x 9.84in x 11.02in)   Description A.Top class/quality products. B.100% quality guarantee before shipment. C.Professional original manufacturer/ highest trust. D.Super offer based on quantity item. E.Guaranteed delivery time. F.Standerd packing team. G.Experienced overseas sales team. H.Higher offer request than customers' request. I.Professional team offer high quality service. J.7X24 hous customers' support.[GD]888 8 Hole coin hopper counter changer  for arcade jamma slot game or vending machine sorters GD888 8 Hole coin hopper counter for arcade jamma slot game or vending machine sorters    1. Product: Game machine coin hopper . 2. Coin Diameter: 19mm~26.5mm. 3. Coin Thickness: 1mm~3mm. 4. Coin speed: 8-12 pcs per second.         Place of Origin: China (Mainland) Brand Name: GANGDU Type: Coin changer hopper, coin counter, coin motor & Game Controllers Model Number: 888   1) Anti-jam design with patented technology 2) Reliable fast payout  3) Two layers rotator built for long operation 4) Wide range coin size.truly global 5) Low position coin exit allows closet installation of the hoppers 6) Reliable optical sensors 7) Support both metal coins and non-metal tokens 8) Automatically restore from the failure under the intelligent control  9) Easy to replace worn parts   2) 1.Game machine coin hopper . 2.Coin Diameter: 19mm~26.5mm. 3.Coin Thickness: 1mm~3mm. 4.Coin speed: 8-12 pcs per second. Packaging Details  Unit Type:piece Package Weight:3.9kg (8.598lb.) Package Size:30cm x 25cm x 28cm (11.81in x 9.84in x 11.02in)   Description A.Top class/quality products. B.100% quality guarantee before shipment. C.Professional original manufacturer/ highest trust. D.Super offer based on quantity item. E.Guaranteed delivery time. F.Standerd packing team. G.Experienced overseas sales team. H.Higher offer request than customers' request. I.Professional team offer high quality service. J.7X24 hous customers' support. more>
Send Inquiry

Hot Sales 2020 Trending products with competitive prices Handmade outdoor daybed Used for garden or pation
$100
Category: Chemicals/Chemical Intermediates/Intermediate Compounds
Company: Guangxi Bobai Xinmao Industrial Co., Ltd
Product Description: Quick Details Specific Use: Garden Sofa, Garden Set General Use: Outdoor Furniture, Outdoor Furniture Mail packing: Y Material: Rattan / Wicker Sofa Type: Set Place of Origin: Guangxi, China Brand Name: rattanbaby Model Number: xm27 Folded: No Feature: Eco-friendly Frame: Aluminum Color: Black, as customer request Function: Outdoor life Oem: yes Size: As custom size Product name: Outdoor Rattan Garden Sofa more>
Send Inquiry

Second-hand RF source OTFC-1800 vacuum coating machine/electron beam evaporator for sale or lease.
$15600
Category: Others
Company: Dongguan Zhunna Optoelectronic Technology Co., Ltd.
Product Description: Factory Transfer: 2 High-Configuration Optorun OTFC-1550/1800 Vacuum Coating MachinesEquipment Dimensions:Equipment Name: OTFC-1550CBI/DBIVacuum Chamber: SUS304, φ1550mm×1800mm (H)Workpiece Holder: φ1400mmWorkpiece Holder Rotation Speed: 10rpm to 30rpm (Variable)Optical Thickness Control: HOM2-R-VIS350A Optical Thickness MonitorWavelength Range: 350nm to 1100nmReflective/TransmissiveCrystal Thickness Gauge: XTC/3+6-Point Crystal SensorEvaporation Source: 2 Sets of Electron GunsIon Source: 17cm RF Ion SourceSales Technical Manager Yang: 18103045976Mechanical Performance:Exhaust System: Mechanical Pump + 2 Diffusion Pumps + Polycold (or 2 Cryopumps)Ultimate Pressure: Below 7.0×10⁻⁵PaPump-Down Time: 15 Minutes (Atmospheric Pressure to 1.3×10⁻³Pa)Substrate Temperature: Maximum 350℃Working Conditions:Equipment Dimensions: Approximately 5500mm(W)×7200mm(D)×3700mm(H)Power Supply: 3-Phase, 200V, 50/60Hz, Approximately 120KVAWater Flow Rate: 180 Liters/Minute or MoreAir Pressure: 0.5MPa or MoreWeight: Approximately 10000kgApplicable for Various Optical Thin Film Deposition Systems, Including LED Optical Films, ITO Films, Anti-Reflection Films, and Multi-Layer Films more>
Send Inquiry

Mining Modular Cable Hook, Adjustable for Addition or Reduction, GL-PVC100 Single Hook, Neat and Tidy.
$0.85
Category: Electrical Equipment & Supplies/Power Distribution & Transmission/Distribution Panels
Company: Yantai Lesen Machinery Equipment Co., Ltd
Product Description: Raw material prices fluctuate, so the price models also vary. For specific quotations, please contact our sales staff. Thank you.Modular mining cable hooks make underground cable routing easy to understand! A single hook securely holds a single cable, while multiple hooks can be combined to neatly arrange power, communication, and signal cables—each in its proper place. The installation is highly flexible, allowing for easy addition, removal, or adjustment. Even the most complex tunnels can be organized neatly—this operation deserves a thumbs-up!Cable Hook Suspension Support:In coal mine underground tunnels, cables are neatly fixed to the tunnel walls using hooks to prevent them from dragging on the ground or being crushed by equipment. They are primarily used for cable installation in mines, surface areas, and underground passages, especially suitable for coal mine underground operations.Features of Mining Cable Hooks:Flame-retardant and anti-static—The anti-static and flame-retardant components are evenly distributed within the hook body, ensuring that these performance indicators are not affected over time. Both anti-static and flame-retardant properties comply with coal mining industry standards, making them suitable for flammable and explosive underground working environments.An ideal accessory for cable installation in mines. Flame-retardant and anti-static—The anti-static and flame-retardant components are evenly distributed within the hook body, ensuring that these performance indicators are not affected over time. Both anti-static and flame-retardant properties comply with coal mining industry standards, making them suitable for flammable and explosive underground working environments.Technical Parameters of Mining Cable Hooks:Hook load-bearing capacity is not less than 160KG.When the curved part of the hook bears a load of 50KG, the deflection of the straight rod section is less than 10mm.The structure of modular mining cable hooks is all about "flexibility"! Single hooks can work independently, while multiple hooks can be assembled into groups. The connection points are tightly fitted and adjustable, allowing stable support for any number of cables and wire diameters. They are lightweight and easy to carry when disassembled, and sturdy and stable when installed! more>
Send Inquiry

Characteristics of explosion-proof junction boxes used in natural environments or under particularly harsh conditions.
$900
Category: Others
Company: Nanyang Shouan Explosion-proof Electric Co., Ltd.
Product Description: The main function of explosion-proof junction boxes is to convert electrical energy from the power source into the required energy for various devices, ensuring that it never causes fires or other safety accidents. Explosion-proof junction boxes are critical explosion-proof electrical devices specifically designed for hazardous environments, such as those with flammable and explosive gases, vapors, and dust. Therefore, the emergence of explosion-proof junction boxes provides effective safety guarantees for electrical equipment in these dangerous locations.Explosion-Proof Junction Box I. Working Principle The primary working principle of explosion-proof junction boxes is to prevent electrical sparks or high temperatures from igniting through special structural and material designs. They feature explosion-proof and flameproof capabilities, meaning that even if internal electrical sparks or high temperatures occur, they effectively prevent flames from spreading to the external environment. II. Features of Explosion-Proof Junction Boxes 1. Superior Explosion-Proof Performance: Utilizes special explosion-proof structures and materials to ensure safety during use in hazardous environments. 2. Flexibility and Convenience: Can be customized in size, number of interfaces, and types according to actual needs, meeting the connection requirements of various electrical devices. 3. Easy Maintenance: Reasonable design facilitates daily inspection, repair, and replacement of electrical components. 4. Durability and Reliability: Made with high-quality materials and strict manufacturing processes to ensure long-term stable operation in harsh industrial environments. III. Applications of Explosion-Proof Junction Boxes Explosion-proof junction boxes are widely used in industries with hazardous environments, such as petroleum, chemicals, pharmaceuticals, and military manufacturing. In these industries, the connection and wiring of electrical equipment require high levels of safety and reliability, and explosion-proof junction boxes provide safe and stable electrical connection solutions. IV. Maintenance and Management of Explosion-Proof Junction Boxes To ensure the normal operation and safety performance of explosion-proof junction boxes, the following maintenance and management measures should be regularly implemented: 1. Regularly inspect the appearance and structure of the junction box to ensure it is intact, without deformation, cracks, or other issues. 2. Check the electrical connections and wiring inside the junction box to ensure they are secure, without looseness or short circuits. 3. Regularly clean the interior and exterior environment of the junction box to remove dust and dirt, maintaining good heat dissipation performance. 4. Promptly replace damaged or aged electrical components and wiring to ensure the safety and reliability of the junction box.V. Conclusion As a key component in ensuring electrical safety in industrial environments, explosion-proof junction boxes play an irreplaceable role in industrial production. By understanding their working principles, features, applications, and maintenance requirements, we can better recognize and apply this important industrial equipment, providing strong support for the safety and stability of industrial production. Relevant enterprises and personnel should highly prioritize the safety management of explosion-proof junction boxes to ensure they remain in good operating condition over the long term. more>
Send Inquiry

Hard Drive Data Recovery or Repair
$300
Category: Others
Company: 天津市天伟悦龙计算机维修服务中心
Product Description:       If no hard drive is detected upon startup, the first thing to consider is the hard drive itself. As soon as the hard drive is powered on, it operates continuously, spinning at speeds of over 5,000 revolutions per minute. Such mechanical structures are prone to malfunctions. When detecting the hard drive in CMOS, listen to the sound it makes. If the sound is: "click... click... click..." and then it becomes quiet, operating normally, there is a high possibility that the hard drive is likely fine. It could also be due to insufficient power supply. If the sound is "click... click... click..." followed by several consecutive "clack... clack" noises, there is a strong chance that the hard drive has failed, and the read/write head is damaged. In this case, the only solution is to replace the hard drive. If data recovery is needed, professional disassembly and data recovery services are required.        Tianwei Data Recovery Center offers a wide range of services, including: Tianjin data recovery company hard drive data recovery, recovery of deleted computer files, recovery of files deleted from the computer recycle bin, recovery of formatted partition files, Tianjin repartition data recovery, external hard drive data recovery, data recovery for unrecognized external hard drives, 1TB external hard drive data recovery  2TB external hard drive data recovery  hard drive repair  Windows corrupted file recovery  bad disk data recovery   data recovery for hard drives not displaying  unrecognized drive recovery  disassembly data recovery  USB drive data recovery  data recovery when the computer shows no response after inserting a USB drive, server data recovery, MySQL data retrieval, and more. Have you ever encountered a situation where the computer shuts down and automatically restarts, only to find the hard drive missing? If there is important data inside, you can contact us. more>
Send Inquiry

300S58 or 12SH-9 double suction pump shaft sleeve impeller
Negotiable
Category: Machinery & Equipment/Compression & Separation Equipment/Oil-Free Air Compressors
Company: 自贡自泵球阀水泵有限公司
Product Description: 自贡自泵水泵300S58或12SH-9双吸泵叶轮轴套轴承体压盖所列价格为参考价格,不同型号不同材质的价格有所不同,同时该产品为定制产品,有一个生产周期,交货期也有所不同。因此具体型号的价格和货期,请来电咨询。密封形式:填料密封或机械密封可供选择。流量范围:60~2800m3/h, 扬程范围:15m~125m常用材质:铸铁HT常见的双吸泵型号100ZS90,150ZS50,150ZS78,150ZS100,200ZS42,200ZS63,200ZS95,200ZS125,250ZS14,250ZS24,250ZS39,250ZS65,300ZS12,300ZS16,300ZS32,300ZS58,300ZS90,350ZS16,350ZS26,350ZS44,350ZS75,350ZS125,500ZS13,500ZS22,500ZS35,500ZS59,500ZS98,600ZS22,600ZS32,600ZS47,600ZS75。6SH-6, 6SH-9, 8SH-6, 8SH-9, 8SH-13, 10SH-6, 10SH-9, 10SH-13, 10SH-19, 12SH-6, 12SH-9, 12SH-13, 12SH-19, 12SH-28, 14SH-6, 14SH-9, 14SH-13, 14SH-19, 14SH-28, 16SH-9, 20SH-6, 20SH-9, 20SH-13, 20SH-28 , 24SH-6, 24SH-9, 24SH-13, 24SH-19, 24SH-28 more>
Send Inquiry

300S90 or 12SH-6 Horizontal Double Suction Pump Impeller Sleeve
Negotiable
Category: Machinery & Equipment/Compression & Separation Equipment/Vacuum Pump Units
Company: 自贡自泵球阀水泵有限公司
Product Description: Zigong Zipump Water Pump 300S90 or 12SH-6 Horizontal Double Suction Pump Clean Water Centrifugal Pump Impeller Shaft Sleeve CouplingThe listed prices are reference prices; prices vary depending on the model and material. Additionally, this product is custom-made and has a production cycle, so delivery times also vary. Therefore, for specific model prices and delivery schedules, please call for inquiries.ZS Type Double Suction Pump: When viewed from the motor end, the pump rotates clockwise. ZSH Type Double Suction Pump: When viewed from the motor end, the pump rotates counterclockwise.Supplier: Zigong Zipump Ball Valve Water Pump Co., Ltd. ZIPO VALVE & PUMP CO., LTD more>
Send Inquiry

300S19 or 12SH-19 double suction pump shaft sleeve impeller
Negotiable
Category: Machinery & Equipment/Pumps/Other Pumps
Company: 自贡自泵球阀水泵有限公司
Product Description: Zigong Zipump Water Pump 300S19 or 12SH-19Double Suction Pump Impeller SleeveThe listed prices are reference prices; prices vary for different models and materials. Additionally, this product is custom-made with a production cycle, and delivery times also differ. Therefore, for specific model prices and delivery schedules, please call for inquiries.Flow range: 60~2800 m³/h, Head range: 15 m~125 m Common material: Cast iron HTCommon double suction pump models: 100ZS90, 150ZS50, 150ZS78, 150ZS100, 200ZS42, 200ZS63, 200ZS95, 200ZS125, 250ZS14, 250ZS24, 250ZS39, 250ZS65, 300ZS12, 300ZS16, 300ZS32, 300ZS58, 300ZS90, 350ZS16, 350ZS26, 350ZS44, 350ZS75, 350ZS125, 500ZS13, 500ZS22, 500ZS35, 500ZS59, 500ZS98, 600ZS22, 600ZS32, 600ZS47, 600ZS75.6SH-6, 6SH-9, 8SH-6, 8SH-9, 8SH-13, 10SH-6, 10SH-9, 10SH-13, 10SH-19, 12SH-6, 12SH-9, 12SH-13, 12SH-19, 12SH-28, 14SH-6, 14SH-9, 14SH-13, 14SH-19, 14SH-28, 16SH-9, 20SH-6, 20SH-9, 20SH-13, 20SH-28, 24SH-6, 24SH-9, 24SH-13, 24SH-19, 24SH-28 more>
Send Inquiry

Q641F or Q647W Quick Shut-off Valve Pneumatic Ball Valve
Negotiable
Category: Machinery & Equipment/Valves/Ball Valves
Company: 自贡自泵球阀水泵有限公司
Product Description: Sichuan Zigong Valve Ball Valve Q641F or Q647W Quick Shut-off Valve Pneumatic Ball ValveBefore consulting or purchasing, users are requested to provide accurate parameters such as caliber, pressure, connection method, operation method, and main body material. The above prices are reference prices, and prices vary for different models. Additionally, this product is a customized product with a production cycle, and delivery times also vary. Therefore, for specific model prices and delivery times, please call for consultation.A pneumatic ball valve is a ball valve equipped with a pneumatic actuator. The pneumatic actuator operates relatively quickly, so it is often referred to as a pneumatic quick shut-off ball valve. Pneumatic ball valves are typically equipped with various accessories, such as solenoid valves, air source treatment triple units, limit switches, positioning devices, control boxes, etc., to enable local control and remote centralized control. The valve can be controlled from the control room without the need to manually operate it on-site, saving labor and time. Pneumatic ball valves are classified by material into: stainless steel pneumatic ball valves, plastic pneumatic ball valves, carbon steel pneumatic ball valves, cast iron pneumatic ball valves, etc. They are classified by the number of passages into two-way pneumatic ball valves, three-way pneumatic ball valves, and four-way pneumatic ball valves.Pneumatic ball valves only require a pneumatic actuator with an air source to rotate 90 degrees and a small torque to open or close the valve. The smooth inner cavity of the valve body provides a low-resistance, straight-through flow path for the medium. The main features of pneumatic ball valves are their compact structure, ease of operation and maintenance, and suitability for media such as water, solvents, acids, and natural gas, as well as other media like oxygen.Pneumatic ball valves are primarily used in pipelines for quick shut-off, distribution, and changing the flow direction of the medium. They have the following characteristics:1. Low fluid resistance, with a resistance coefficient equal to that of a pipe section of the same length.2. Stable sealing performance, simple structure, small size, and light weight.3. Easy operation, quick opening and closing, and convenient for remote control.4. Easy maintenance, with a simple structure and generally movable sealing rings, making disassembly and replacement convenient.5. Since the power source of pneumatic ball valves is gas, typically at a pressure of 0.2-0.8MPa, if the pneumatic ball valve leaks, the gas can be directly discharged, causing no environmental pollution compared to hydraulic or electric actuators.Pneumatic ball valves have been widely used in industries such as petroleum, chemical, power generation, papermaking, as well as in daily life.Supplier: Zigong ZIPU Valve & Pump Co., Ltd more>
Send Inquiry

350SS44 or 14SH-13 double suction pump impeller shaft sleeve
Negotiable
Category: Machinery & Equipment/Compression & Separation Equipment/Refrigerated Air Dryers
Company: 自贡自泵球阀水泵有限公司
Product Description: Zigong Zipump Water Pump 350SS44 or 14SH-13Double Suction Pump Impeller Shaft Sleeve Dowel PinThe listed prices are reference prices; prices vary depending on the model and material. Additionally, this product is custom-made with a production cycle, and delivery times may differ. Therefore, for specific model pricing and delivery schedules, please call for inquiries.Sealing Type: Packing seal or mechanical seal available.Flow Range: 60~2800 m³/h, Head Range: 15 m~125 m Common Material: Cast Iron HTCommon double suction pump models: 100ZS90, 150ZS50, 150ZS78, 150ZS100, 200ZS42, 200ZS63, 200ZS95, 200ZS125, 250ZS14, 250ZS24, 250ZS39, 250ZS65, 300ZS12, 300ZS16, 300ZS32, 300ZS58, 300ZS90, 350ZS16, 350ZS26, 350ZS44, 350ZS75, 350ZS125, 500ZS13, 500ZS22, 500ZS35, 500ZS59, 500ZS98, 600ZS22, 600ZS32, 600ZS47, 600ZS75.6SH-6, 6SH-9, 8SH-6, 8SH-9, 8SH-13, 10SH-6, 10SH-9, 10SH-13, 10SH-19, 12SH-6, 12SH-9, 12SH-13, 12SH-19, 12SH-28, 14SH-6, 14SH-9, 14SH-13, 14SH-19, 14SH-28, 16SH-9, 20SH-6, 20SH-9, 20SH-13, 20SH-28, 24SH-6, 24SH-9, 24SH-13, 24SH-19, 24SH-28 more>
Send Inquiry

D-type multistage pump or QDLF vertical multistage centrifugal pump
$5850
Category: Machinery & Equipment/Compression & Separation Equipment/Process Compressors
Company: 自贡自泵球阀水泵有限公司
Product Description: Zigong Zipump High Head Single Suction ZD type ZDG type ZDF Horizontal Multi-stage Centrifugal PumpBefore consulting or purchasing, users are requested to provide accurate parameters such as flow rate, head, pipe loss, medium specific gravity, motor power, etc.ZD, ZDF type multi-stage centrifugal pumps are used for conveying clean water without solid particles and media with physical and chemical properties similar to clean water. The medium temperature should not exceed 80°C, suitable for mines, power plants, and urban water supply and drainage.Flow range 6~540m³/h, Head range 33~1056mModel ZD type is used for -20~80 degrees Celsius clean water  ZDG type is used for -20~150 degrees Celsius clean waterZDF type stainless steel pump is used for -20~150 degrees Celsius particle-free corrosive media, ZDM type is used for clean water containing a small amount of particles or corrosive media.The basic structure of a multi-stage pump consists of an inlet section, outlet section, intermediate section, end cover, impeller, pump body, pump shaft, bearings, sealing ring, stuffing box, and other components.The inlet section, outlet section, and intermediate section are also called the pump casing, which is the main body of the multi-stage pump. It serves to support and fix, and is connected to the bracket that holds the bearings.The pump shaft is connected to the motor via a coupling, transmitting the motor's torque to the impeller, making it the main component for transferring mechanical energy.The stuffing box mainly consists of packing, water seal ring, packing chamber, packing gland, and water seal pipe. The stuffing box's function is to seal the gap between the pump casing and the pump shaft, preventing water inside the pump from leaking out and outside air from entering the pump. It always maintains the vacuum inside the pump!When friction between the pump shaft and packing generates heat, water is directed through the water seal pipe to the water seal ring to cool the packing and ensure the pump operates normally. Therefore, during routine inspections of the pump's operation, special attention should be paid to the stuffing box, and the packing should be replaced if necessary.Common models of multi-stage centrifugal pumps include:ZD6-25x3~12, ZD12-25x3~12, ZD25-30x3~10, ZD46-30x3~10, 80ZD30x3~10, ZD155-30x2~10, 150ZD30x2~10, 80ZD12x2~10, 100ZD16x2~10, ZD85-45x2~10 100ZD45x2~10, 125ZD25x2~9, ZD46-50x3~12, ZD25-50x3~12, ZD12-50x2~12, 200ZD43x2~9, ZD280-43x2~9, ZD85-67x2~10, ZD155-67x3~10The ZDLF/QDLF vertical stainless steel multi-stage pump is designed by combining the advantages of the ZISG vertical centrifugal pump and the ZDL vertical multi-stage centrifugal pump. It features a vertical, segmented structure with the suction and discharge ports arranged in a straight line at the bottom, optimizing the hydraulic model. The axial force is balanced hydraulically, and the residual axial force is borne by a ball bearing, ensuring smooth operation, low noise, small footprint, and easy installation. The outer casing of the vertical stainless steel multi-stage centrifugal pump is made of stainless steel, giving it an attractive appearance. It is suitable for parallel use in high-rise buildings to reduce the power requirement per pump unit and simplify electrical control equipment. It is applicable for firefighting, domestic water supply, air conditioning system circulation, and cooling water transport in high and low-rise buildings such as residences, hospitals, hotels, department stores, and office buildings.Medium: Thin, clean, non-flammable, non-explosive liquids without solid particles or fibers, such as mineral water, softened water, pure water, light oil, and other light chemical media. Liquid temperature: Normal temperature type -15°C to+70°C. Hot water type: +70°C to +120°C. Ambient temperature: Up to+40°C. Altitude: Up to 1000m.ZDL vertical multi-stage centrifugal pumps are mainly made of cast iron HT material and are used for non-corrosive clean media similar to clean water. ZDLF/QDLF vertical stainless steel multi-stage centrifugal pumps are mainly made of stainless steel 304 or 316 and can be used for pumping mildly corrosive media.Flow range: 2m³/h~120m³/h: Head range: 8m~200mApplication fields: Water supply: Water plant filtration and transportation, zonal water supply in water plants, main pipe boosting, high-rise building boosting. Industrial boosting: Process water systems, cleaning systems, high-pressure washing systems, firefighting systems. Industrial liquid transportation: Cooling and air conditioning systems, boiler feed water and condensation systems, machine tool matching, acids and alkalis. Water treatment: Ultrafiltration systems, reverse osmosis systems, distillation systems, separators, swimming pools. Irrigation: Farmland irrigation, sprinkler irrigation, drip irrigation.ZDL/ZDLF/QDLF common models:ZDL/ZDLF2-20~ ZDL/ZDLF2-260; ZDL/ZDLF4-20~ ZDL/ZDLF4-220; ZDL/ZDLF8-20~ ZDL/ZDLF8-200; ZDL/ZDLF16-30~ ZDL/ZDLF16-160Supplier: Zigong Zipump Ball Valve Pump Co., Ltd. ZIPO VALVE & PUMP CO., LTD more>
Send Inquiry

Hot Sales 2020 Trending products with competitive prices Handmade rattan outdoor table Used to garden or pation
$100
Category: Others
Company: Guangxi Bobai Xinmao Industrial Co., Ltd
Product Description: Quick Details Specific Use: Garden Sofa, Garden Set General Use: Outdoor Furniture, Outdoor Furniture Mail packing: Y Material: Rattan / Wicker Sofa Type: Set Place of Origin: Guangxi, China Brand Name: rattanbaby Model Number: xm26 Folded: No Feature: Eco-friendly Frame: Aluminum Color: Black, as customer request Function: Outdoor life Oem: yes Size: As custom size Product name: Outdoor Rattan Garden Sofa more>
Send Inquiry

Mine Inflatable Air Packs—No Matter the Space, One 800mm Layer Not Enough? Add Two or Three.
$580
Category: Chemicals/Chemical Intermediates/Intermediate Compounds
Company: Yantai Lesen Machinery Equipment Co., Ltd
Product Description: 因原材料波动、因此价格型号也有不同,具体报价请联系销售人员,谢谢。原来充气还能这么用!矿用充气气垛适配高压管,接上压风阀秒变“膨胀”,无需复杂操作,几口气的功夫,还有一种矿用充气气垛连接井下压风系统,“呲——”的一声稳稳筑起!这气垛是懂加固的!加厚涂覆布+隐藏式拉筋1000mm矿用充气气垛一个不经意的小选择。用于煤矿综采工作面采空区,防治采空区有毒有害气体溢出采面(上隅角充填尾巷)。主要有瓦斯、一氧化碳等有毒有害气体;也能够用于采面防飞矸。1、矿用充气气垛材质内层采用PVC受控质料,外层可以配置帆布材质防护罩和防护网(防气囊刺漏),可以反复应用。2、矿用充气气垛充气方式(2)高压氮气瓶充气:采用2-4升充满氮气的高压气瓶(瓶内压力为130-150㎏)举行充气,充到工作压力7-10kpa约需1-1.5min。(3)可以配煤矿KJ10接头,充气采用井下压风系统举行充气,压风系统压力为0.6-0.8MPa,充气口连接不少于1米长10MPa高压管。3、矿用充气气垛尺寸根据实际采面上隅角宽高变化局限(米)来定做。综合来看,充气气垛层层叠加,越堆越稳,越垒越强,管你多大空间高度宽带随心调。 more>
Send Inquiry

Mine Water Supply and Rescue Device, 6 or 8 Person Capacity, Red Breathing Port, Blue Drinking Port.
$1080
Category: Chemicals/Chemical Intermediates/Intermediate Compounds
Company: Yantai Lesen Machinery Equipment Co., Ltd
Product Description: Due to fluctuations in raw materials, prices and models may vary. For specific quotations, please contact our sales staff. Thank you.Mine water supply self-rescue device, available in 6-person and 8-person models! A row of neatly arranged interfaces, red breathing ports, blue drinking valves—even with more people, everyone can get what they need. It hangs inconspicuously in the tunnel but can hold the hope of a group of people at critical moments. Let’s start the introduction from here.Working principle of the M6/M8 compressed air rescue device:In the mine compressed air self-rescue water supply system, in addition to breathing fresh air directly through the self-proning filtering mask, you can also drink municipal tap water filtered by the water purifier. Both fresh air and water are connected via spring hoses, which are flexible and easy to use. The water purifier filter element in the mine compressed air self-rescue water supply system uses currently popular imported PP cotton filter elements for water quality filtration, effectively removing discolored and odorous substances, fine pollutants, and adsorbed materials. The water tastes sweet and refreshing, greatly improving the quality of purified water.How to operate the ZYJ-M6 compressed air water supply self-rescue device?1. First, press the door lock switch to open the box door; pick up the lightweight breathing mask and place it over your mouth, then open the corresponding regulating valve. Adjust the air supply as needed using the regulating valve.3. During use, if the water in the filter bottle exceeds the upper water level, it should be drained. To drain: push the drainage column upward, and the water will immediately drain. After draining, release the drainage column to reset it, completing the drainage process.4. After use, close the regulating valve, orderly place all components back into the box, and close the box door.5. Open the lid of the compressed air water supply self-rescue device box and take out the spring hose. Place the spring hose into your mouth, then open the regulating valve and slowly adjust it to regulate the water pressure.6. After use, close the regulating valve.The six-person compressed air water supply device requires no complicated operation—adjustments are intuitive and user-friendly. Open the box valve wide for clear visibility. Parameters of the multi-person compressed air water supply self-rescue device, models of the compressed air water supply self-rescuer. more>
Send Inquiry