Toocle find for you 2106 information about the with-whatapp.hl.cn, total 100 pages
Customized Multi-Station Manual Boot Washer for Oil Stain Cleaning with 304 Stainless Steel
$4500
Category: Machinery & Equipment/Food & Beverage Processing Equipment/Snack Food Processing Equipment
Company: Kemei Intelligent Equipment (Shandong) Co., Ltd.
Product Description: The dimensions of the two-station handheld boot washer we hold are 1200*630*11201. The entire machine is made of SUS304 stainless steel.2. The handheld brush boot washer features a multifunctional valve for freely switching between detergent and clean water. The handheld brush has an internal water spray design, allowing simultaneous brushing and rinsing, making it suitable for cleaning various styles of boots. This boot washer adopts a food-grade sanitary design with a large tilt drainage system, making it easier to clean and meeting high hygiene standards. It effectively tackles the cleaning of heavily soiled long boots.3. The handheld brush has a switch button on the back. After opening the multifunctional valve, press the switch on the back of the handheld brush to start cleaning. Press it again to stop cleaning.4. The switch on the side of the device: an upward arrow indicates the device is off. An arrow pointing to the right indicates clean water cleaning. An arrow pointing to the left indicates cleaning with a mixed disinfectant solution.5. Both the sole and the side of the boot can be cleaned on the sole brush.6. Daily maintenance in the later stages. more>
Send Inquiry

1400°C High-Temperature Electric Furnace with Equal-Diameter Silicon Carbide Heating Rods
$130
Category: Chemicals/Inorganic Salts/Silicates
Company: Dengfeng City Jinyu Electric Heating Materials Co., Ltd.
Product Description: I. Pay attention to conducting inspections before useGenerally, before installation and use, it is necessary to test the resistance values of the entire batch of silicon carbide rods and categorize them neatly. This ensures that each silicon carbide rod can operate under ideal conditions. At the same time, the current and voltage conditions should also be checked. If abnormalities are detected in the silicon carbide rods during testing, the cause should be identified and resolved promptly. For example, if the current is too low or too high, it may be due to the resistance value being too small or too large.II. Handle with care and take protective measuresSilicon carbide rods have stable performance in various aspects, but they are also very fragile and prone to breakage. Therefore, during installation or use, handle them gently and avoid rough actions. During installation, avoid applying force on one side to prevent breakage. If necessary, take protective measures, such as using heat-resistant steel tubes to sleeve the silicon carbide rods. After installation, cover them with thick steel tubes and secure them with protective sleeves.III. Adjust the voltage as neededAs the resistance value of silicon carbide rods increases after a period of use, it is necessary to raise the voltage to compensate for the loss caused by the increased resistance and ensure stable current. Therefore, the transformer used should have voltage regulation functionality to achieve增压调节 (voltage boost adjustment). For silicon carbide rods, this can also extend their service life. The above are the main aspects to consider when using silicon carbide rods. Additionally, efforts should be made to reduce the impact of temperature on them to prolong their usability. more>
Send Inquiry


Industrial mobile work ladders and platforms with diverse specifications, high quality, and customizable options.
$2000
Category: Chemicals/Chemical Intermediates/Intermediate Compounds
Company: Shenzhen Yihailong Industrial Equipment Co., Ltd.
Product Description:          Industrial mobile work ladders and platforms come in various specifications with high quality and are customizable. Mobile industrial ladders, mobile elevated picking ladders, heavy-duty elevated picking ladders, elevated industrial ladders and platforms. Ladder specifications are not limited, with a variety of styles available. Customization is supported. Welcome to call for consultation. We are dedicated to serving you and look forward to progressing and improving together with you.          I. Introduction to the elevated ladder is as follows:1. Elevated ladder name: Elevated trolley2. Elevated trolley material: The frame is made of φ30 round pipe bent, the step plate is 3.0 mm thick patterned steel plate, the wheels are 4 x 3-inch universal casters with brakes, each bearing a load of 100 kg. The top step plate is 900 mm from the ground.3. Elevated trolley specifications: L1500*W600*H2500 mm4. Elevated ladder price: 2000 yuan/unitII. Features of the elevated trolley:1. Made of high-quality steel paired with high-quality casters for flexible mobility.2. The surface is treated with epoxy resin electrostatic spraying, providing strong anti-corrosion and anti-rust effects. Applicable scope: Widely used in libraries, homes, shopping malls, supermarkets, enterprise warehouses, institutions, auto parts warehouses, pharmaceutical, electronic, and apparel companies. It is an ideal choice for current logistics management and an ideal upgrade from traditional wooden and steel pipe welded shelves.3. The elevated trolley can have 4 steps, 6 steps, 7 steps, 8 steps, 10 steps, or 11 steps. Our company can customize various ladder heights and quantities according to customer requirements.4. The elevated trolley is equipped with directional casters and universal casters, allowing free movement for convenient picking and transporting of goods.5. The elevated trolley is available in assembled and non-assembled (i.e., welded) types. Welded elevated trolleys are cheaper but less convenient to ship and have higher costs. Assembled elevated ladders are relatively more expensive but easier and cheaper to ship. Both types have their advantages, and customers can choose accordingly. 13073095732, Mr. Zheng more>
Send Inquiry

Cross-linked polyethylene insulated steel tape armored PVC sheathed power cable with copper core
Negotiable
Category: Chemicals/Amines/Cyclohexylamine
Company: Hubei Special Cable Group Co., Ltd.
Product Description: Product Introduction Power cables are used for transmitting and distributing electrical energy. Common medium-voltage power cables consist of a conductor, conductor shielding, insulation, insulation layer, metal shielding, isolation sheath, armor layer, and outer sheath. Medium-voltage cross-linked polyethylene insulated power cables are the most common. Application Fields Medium-voltage power cables are used for rated voltages of 8.7/10kV, 8.7/15kV, or 26/35kV and below, in urban underground power grids, power station outgoing lines, internal power supply for industrial and mining enterprises, and subsea or river-crossing transmission scenarios. Remarks 1. For flame-retardant cables, add "ZR-" or "ZA/B/C-" before the original model number. 2. For fire-resistant cables, add "NH-" or "N-" before the original model number. more>
Send Inquiry

XLPE Insulated Steel Tape Armored PE Sheathed Power Cable (Low Voltage) with Copper Conductor
Negotiable
Category: Chemicals/Adhesives & Sealants/Rubber Adhesives
Company: Hubei Special Cable Group Co., Ltd.
Product Description: Product Introduction Power cables are used for transmitting and distributing electrical energy. Low-voltage power cables generally consist of four parts: conductor, insulation layer, and protective layer. PVC, PE, and XLPE insulated power cables are the most common. Application Fields Low-voltage power cables are commonly used in urban underground grids, power station outgoing lines, internal power supply for industrial and mining enterprises, and subsea or river-crossing transmission applications with rated voltages of 0.6/1kV and below. Notes 1. For flame-retardant cables, add "ZR-" or "ZA/B/C-" before the original model, e.g., ZR-YJV, ZC-YJV; 2. For fire-resistant cables, add "NH-" or "N-" before the original model, e.g., NH-YJV22, N-YJV; 3. For halogen-free low-smoke cables, add "WD-" before the original model, e.g., WDZ-YJY, WDZN-YJY23; more>
Send Inquiry

Walking Safety Platform VR Safety Experience Hall Interactive Platform with Software, Yituo Technology, Pico, DPVR.
$200定金
Category: Others
Company: Beijing Yituo Technology Co., Ltd.
Product Description: Material: Sturdy sheet metal carved appearanceNumber of users: 1 personProduct dimensions: 2500*2500*2450mmVR external head-mounted device: PICO NEO 3 PROMain processing unit composition and key technical parameters:CPU: i5-Quad CoreMemory: Kingston 8G 2666Hard drive: 256G SSDGraphics card: NVIDIA GTX1660 6G dedicated graphicsPower supply: Golden Field 500W power supplyBuilt-in display: 55-inch high-definition industrial screenRated voltage/power: 220V/850WEquipped with multiple VR interactive content for an immersive virtual experience from multiple perspectivesOne-stop solution application service providerFire safety education series Construction site safety education seriesCoal mine safety education series Production safety education seriesNatural disaster education series Party building education seriesTraffic safety education series Campus safety education seriesElectrical safety education series Science popularization safety education seriesAnti-drug and anti-fraud education series Safety training education seriesVR software showcaseFor more customized content, please contact customer serviceCoal mine operation safety training experience system *6Coal mine accident case warning education experience system *7Coal mine basic safety knowledge training experience system I *5Coal mine hazard identification experience system *9Coal mine safety knowledge basic learning experience system *9Coal mine accident prevention and handling experience system *5Coal mine operation safety training experience system *10Coal mine accident emergency training experience system *8Coal mine digital twin experience system *4Coal and chemical system software *9Education product system *901. Provides an immersive experienceThe VR walking platform uses virtual reality technology to simulate real environments, allowing users to feel as if they are in a virtual world. This immersive experience enhances user engagement and sensation.02. Broad application prospectsThe VR walking platform has wide applications in entertainment, education, healthcare, and other fields. In education, it offers interactive learning experiences, allowing students to explore virtual historical scenes, conduct scientific experiments, and interact with virtual characters.03. Improves efficiency and reduces costsBy simulating real environments, the VR walking platform enables users to rehearse and train in virtual settings, thereby improving efficiency, reducing errors, and cutting costs in actual operations.04. Convenient and easy to useThe VR walking platform is typically equipped with advanced sensors and multimedia devices, making it easy for users to enter the virtual reality world. Additionally, the platform can be customized to meet the needs of various fields and industries. more>
Send Inquiry

Three Coal Mining Methods VR Safety Education System Compatible with PicoVR All-in-One Headset
$4999
Category: Others
Company: Beijing Yituo Technology Co., Ltd.
Product Description: VR Warning Education System for Three Coal Mining MethodsThe system includes VR coal mine safety training and coal mine accident restoration systems. In VR coal mine safety training, employees use VR headsets to "experience" dangerous scenarios from a first-person perspective.System Content:The content of the three coal mining methods includes: safety precautions for blasting mining, safety precautions for conventional mining, and safety inspection items for fully mechanized mining.SystemAdvantages:1.Virtual Reality: Through virtual reality devices such as VR glasses, trainees can immerse themselves in the coal mining environment, including operating shearers, hydraulic supports, and scraper conveyors, allowing them to learn coal mining procedures and precautions in a virtual setting, thereby improving their mastery of coal mining techniques.2.High Safety: Conducting coal mining operation training in a virtual environment poses no risk of injury to trainees and causes no environmental pollution, fully ensuring their safety.3.Strong Interactivity: The system enables interactive operations with trainees, allowing them to perform coal mining tasks in the virtual environment using VR devices, such as controlling shearers and adjusting hydraulic supports, thereby enhancing their operational skills and emergency response capabilities.4.Self-Paced Learning: Through this system, trainees can engage in self-directed learning according to their own pace and needs, achieving customized online learning and improving training effectiveness and learning experience.5.Comprehensive Knowledge: The system integrates various aspects of coal mining techniques, including shearer operation, hydraulic support operation, and scraper conveyor operation, offering comprehensive and rich content to meet the diverse needs of trainees.6.High Visualization: The system uses virtual reality technology to visually simulate the coal mining site, enabling trainees to gain a clearer understanding of the environment and further enhancing their mastery of coal mining techniques.Technical Approach:The system is developed using the Unreal Engine, leveraging PBR materials to create realistic virtual representations of underground working environments. Particle systems are used to simulate effects such as water spraying and dust during operations.VR Browsing Device Support:Pico, DPVR; During practical operation, trainees can use head-mounted displays or other input devices to "experience" various simulated maintenance scenarios from a first-person perspective and follow system prompts for operation and training. Additionally, the system provides real-time evaluation and feedback based on the trainee's performance, helping them correct mistakes and improve their skill level. more>
Send Inquiry

Explanation of Models Used in Photovoltaic Field Environmental Monitoring with Photovoltaic Weather Stations
$面议
Category: Instruments & Meters/Analytical Instruments/Other Analytical Instruments
Company: Dongguan Lüguang New Energy Technology Co., Ltd.
Product Description: In the field of renewable energy, the stable operation and efficient power generation of photovoltaic (PV) power plants rely heavily on meteorological data support. As the "weather brain" of PV power plants, the selection of meteorological monitoring equipment directly impacts power generation forecasting, equipment maintenance, and the economic benefits of the plant. Among various meteorological monitoring solutions, the TWS-4B PV Weather Station, introduced by Dongguan Lvguang New Energy, is becoming a preferred solution in the industry due to its professional performance and innovative design.The TWS-4B PV Weather Station is a comprehensive environmental monitoring system specifically designed for PV power plants. The system adopts a modular design, integrating eight core monitoring modules: total radiation sensor, diffuse radiation sensor, direct radiation sensor, ambient temperature sensor, module temperature sensor, wind speed sensor, wind direction sensor, and precipitation sensor. This comprehensive data collection capability enables plant operators to grasp various environmental parameters affecting PV power generation efficiency. Among these, the total radiation sensor has a measurement range of 0-2000 W/m² with an accuracy of ±2%, accurately recording changes in solar radiation intensity. The module temperature sensor features a patch design with a measurement range of -40°C to +120°C, helping maintenance personnel monitor the operating temperature of PV panels in real-time, providing a basis for cleaning cycles and heat dissipation management.Compared to traditional weather stations, the TWS-4B has significant advantages in data collection frequency. The device supports data collection at least once per minute and can be adjusted to higher frequencies as needed, ensuring the capture of instantaneous meteorological changes such as sudden light intensity fluctuations and gusts. The collected data is uploaded in real-time to a cloud monitoring platform via 4G wireless transmission technology. Combined with Lvguang New Energy's self-developed data analysis software, it enables advanced functions such as power generation forecasting, equipment anomaly alerts, and energy efficiency analysis.In terms of environmental adaptability, the TWS-4B performs excellently. The device has an overall protection rating of IP65, with key sensors designed to be dustproof and waterproof, capable of withstanding harsh environments such as sandstorms and salt spray. The wind speed sensor uses ultrasonic principles with no mechanical rotating parts, avoiding the wear issues of traditional cup anemometers in sandy environments. Within an extreme temperature range of -30°C to 70°C, the device maintains stable operation, making it particularly suitable for the complex climatic conditions in PV-intensive regions such as Northwest and North China. According to the operational report of a 200MW PV power plant in Inner Mongolia, the TWS-4B maintained accurate data collection and 100% device integrity after 15 consecutive days of sandstorms.Ease of installation is another highlight of the TWS-4B. The device adopts an integrated design, with all sensors mounted on a lightweight bracket. On-site installation takes only 2-3 hours, significantly shortening the plant construction cycle. The bracket is made of anodized aluminum alloy, which is lightweight yet high-strength, with wind resistance up to 60 m/s. A unique solar tracking system ensures that the radiation sensors always face the sun directly, eliminating the need for frequent manual angle adjustments. Engineers from a distributed PV project in Shandong reported that the TWS-4B reduced installation and debugging time by 40% compared to similar products, with data drift less than 1% within six months after initial calibration, significantly lowering maintenance costs.In terms of data security and system compatibility, the TWS-4B uses industrial-grade encrypted transmission protocols to ensure meteorological data is not tampered with during transmission. The device supports multiple communication protocols such as Modbus RTU/TCP and HTTP, enabling seamless integration with plant management systems like SCADA and EMS. Open API interfaces allow third-party platforms to access data, meeting the customized needs of different clients.From an economic perspective, the TWS-4B offers a competitive return on investment. Although the unit price is about 15% higher than that of ordinary weather stations, the more accurate data support enables more scientific operational decisions. Practical cases show that optimizing cleaning schedules based on module temperature data provided by the TWS-4B can reduce annual cleaning frequency by 2-3 times, saving maintenance costs by 80,000 to 120,000 RMB per MW. Utilizing its radiation data to optimize inverter parameters can improve power generation efficiency by 1.5-3%. Over a 20-year lifecycle, a single TWS-4B unit can generate over 20 million RMB in additional revenue for a 100MW power plant.Dongguan Lvguang New Energy provides comprehensive technical support for the TWS-4B, including on-site installation guidance, regular calibration services, and data analysis training. The company has established a nationwide service network, promising a 24-hour response to故障 reports and on-site resolution within 72 hours. The device comes with a 5-year warranty, far exceeding the industry average of 3 years, reflecting the company's confidence in product quality. The manager of a PV power plant in Xinjiang commented: "Lvguang's technical team not only installed the equipment professionally but also regularly followed up to guide us on data analysis methods. This end-to-end service gives us great peace of mind."As the PV industry moves toward智能化, the TWS-4B is continuously being upgraded. The new firmware already supports 5G transmission and edge computing capabilities, allowing preliminary data processing at the device end to reduce server load. The next-generation product will integrate atmospheric turbidity monitoring and snow detection modules to further meet the needs of power plants in特殊 environments.In summary, the TWS-4B PV Weather Station, with its accurate monitoring, stability, reliability, and intelligent efficiency, provides a professional-grade meteorological data solution for PV power plants. Whether for large-scale ground-mounted plants or distributed projects, this device can effectively enhance plant management levels, optimize power generation efficiency, and improve return on investment. Against the backdrop of carbon neutrality goals driving the rapid development of the PV industry, choosing professional monitoring equipment like the TWS-4B will be a wise decision for plant operators to enhance their competitiveness. more>
Send Inquiry

CS110 Multi-Cylinder Spring Cone Crusher Hydraulic Oil Station System Equipped with Safety Cylinder
$3688
Category: Energy/Lubricating Oil & Grease/Other Lubricants
Company: Zhengzhou Xize Fluid Technology Co., Ltd.
Product Description: The CS110 spring cone crusher hydraulic oil station, innovatively developed by Zhengzhou Jiansheng Hydraulics, primarily features: overload protection,automatic discharge of crushed materials,automatic recoveryIt is widely used in crushing operations of mining machinery and equipment. This system offers advantages such as compact size, light weight, rapid response, and strong controllability. more>
Send Inquiry

Binder for iron powder molding with wet strength, intact after 2-meter drop.
Negotiable
Category: Instruments & Meters/Specialized Instruments/Other Specialized Instruments
Company: Dazhou Jianjie New Materials Technology Co., Ltd.
Product Description: Binder for Iron Powder Forming with Wet Strength, Intact After 2-Meter DropEnvironmental Protection and Economic Efficiency·No sulfur or phosphorus added, heavy metal content complies with national standards (GB38400-2019), no harmful emissions after combustion.·Replaces traditional bentonite, avoids reduction in iron grade (each 1% bentonite reduces grade by 0.7 points).· Green and Eco-Friendly: No harmful chemical additives, environmentally friendly, non-corrosive to equipment, does not increase ash content, does not reduce calorific value, non-flammable, smokeless and odorless.7. Excellent Performance: Produces 35-50 tons of pellets per ton, with a forming rate of 98%, wet pellets remain intact after a 2-meter drop, cold strength of 80 kg/pellet, and hot strength of 55 kg/pellet. more>
Send Inquiry

304 Stainless Steel Thawing Rack Cart with Thawing Machine for Meat Processing Workshop Food
$1200
Category: Machinery & Equipment/Engineering & Construction Machinery/Other Engineering & Construction Machinery
Company: Shandong Junye Purification Equipment Co., Ltd.
Product Description: Stainless Steel Rack Cart: Also known as a quick-freeze cart, freezing rack cart, stainless steel shelf cart, meat drying cart, thawing rack cart, or slow-thawing rack cart, this product is made of stainless steel and is primarily used in environments such as quick-freeze warehouses and thawing warehouses. Based on appearance, it can be divided into two types: single-row quick-freeze carts and double-row quick-freeze carts.One of the models, measuring 1376*676*1628 mm (internal dimensions 1300*600*1628 mm), is suitable for trays with an upper inner diameter of 580*380 mm and a lower inner diameter of 550*350 mm, with a height of 160 mm. Customization is available according to customer requirements.Quick-Freeze Rack Cart (1) Used with containers such as freezing trays and plastic baskets (dimensions and layer height customized based on the container).(2) Upright legs: 38 mm square * 1.5 mm thick, stainless steel arm supports with nylon silent wheels, low-temperature resistant, two fixed and two swivel wheels, with brakes. (3) Slide rails made of 2.0 mm thick 304 stainless steel, with one end bent upward by 10 mm and the other end bent downward by 10 mm. (4) Accommodates ten layers of 600*400*100-120 mm trays, with two trays per layer. (5) Specifications: 850*700*1700 mm.Thawing Rack Cart (1) Specifications: 1400*650*1690 mm, made of 304 stainless steel. (2) Base frame and upright columns: 38*38*1.5 mm, cross supports and tray supports: 38*25*1.5 mm, with eight square tubes per layer. (3) Stainless steel arm supports with nylon wheels, two fixed and two swivel wheels. more>
Send Inquiry

M12 Socket, Type A, Front Panel Mount, Solder Wire Type with Terminal Wire 24AWG
$23
Category: Machinery & Equipment/Pipes & Fittings/PE Water Supply Pipes
Company: Shanghai Keyingfa Electrical Technology Co., Ltd.
Product Description: After ten years of dedicated effort, Shanghai Keyingfa Electric Technology Co., Ltd. has achieved mass production of M12 threaded interface connectors and sockets, as well as M8 connectors and sockets. The company has innovatively developed high-temperature resistant and highly sealed socket products. Through scientific design and the selection of high-quality raw materials, the products offer high reliability, addressing urgent user needs and earning customer acclaim. With stable quality and significant production capacity advantages, timely delivery is ensured. The current annual production capacity is 1 million units (pieces). This product series has passed the EU CE environmental directive certification. The company has obtained the *** quality system certification. The main products in this series include: M12 sockets (panel mount, PCB solder, special types), 7/8 connectors, mining connectors, solar simulators, M8 connectors, and more. Our company specializes in customizing products according to specific user requirements. For more detailed product parameters or business discussions, please contact us. more>
Send Inquiry

Processing of glass grating scales with non-standard customization, just provide drawings or samples.
$询价
Category: Construction & Building Materials/Glass/Processed Glass
Company: Dongguan Kuanghe Electronic Technology Co., Ltd.
Product Description: ProductNameGlass Grating RulerProductMaterialFloat glass, K9 glass, ultra-clear glass, etc.ConventionalThickness0.7mm 1.0mm 1.1mm 2.0mm 3.0mmProcessAdvantages1. Pulse lines are uniform, vertical, and smooth, with no connections or breaks;2. High precision, no limit on pulse count, small line size can reach 0.006mm,3. Small tolerance can reach 0.2 microns;4. Excellent thermal stability, extremely high mechanical strength and pressure resistance;5. Good cleaning effect, reusable, long service life, and wide range of applications;PrecisionTolerance ±0.0002mm (i.e., 0.2 microns), industry standard;DeliveryCycleStandard sampling: 30 days, delivery: 40 days.ApplicationA digital encoder for measuring angular displacement. It offers strong resolution, high measurement accuracy, and reliable performance, making it a commonly used displacement sensor for measuring shaft rotation angle.The code disk (grating disk) has several rectangular holes evenly distributed on a circular plate of a certain diameter. Since the photoelectric code disk is coaxial with the motor, when the motor rotates, the code disk (grating disk) rotates at the same speed as the motor. The detection device, composed of electronic components such as light-emitting diodes, detects and outputs several pulse signals. By calculating the number of pulses output by the photoelectric encoder per second, the current motor speed can be determined. (As shown in the figure below) more>
Send Inquiry

MTN645094 Fan Coil Unit Control Module (Compatible with 2-pipe and 4-pipe Systems)
Negotiable
Category: Chemicals/Chemical Intermediates/Intermediate Compounds
Company: Hubei Bokong Intelligent Technology Co., Ltd.
Product Description: Undertaking smart home systems and intelligent lighting systems for KNX manufacturers such as ABB, Schneider, Siemens, GVS, HDL, etc. Providing one-stop solution design, equipment supply, installation, and commissioning services for intelligent system engineering design, installation, commissioning, and after-sales support. Projects include designing KNX DALI dimming systems, motorized curtains, air conditioning, fresh air systems, underfloor heating integration, background music systems, and more.MTN647393FN2-Channel 16A Switch Control ModuleMTN647593FN4-Channel 16A Switch Control ModuleMTN647893FN8-Channel 16A Switch Control ModuleMTN648493FN12-Channel 16A Switch Control ModuleMTN647395FN2-Channel 16A Switch Control Module with Current DetectionMTN647595FN4-Channel 16A Switch Control Module with Current DetectionMTN647895FN8-Channel 16A Switch Control Module with Current DetectionMTN648495FN12-Channel 16A Switch Control Module with Current DetectionMTN6705-0008FNSpaceLogic KNX 8-Channel 16A Switch Curtain Master ModuleMTN6805-0008FNSpaceLogic KNX 8-Channel 16A Switch Curtain Expansion ModuleMTN647091FNSingle-Channel Fluorescent Lamp Dimming Module (0-10V)MTN646991FN3-Channel Fluorescent Lamp Dimming Module (0-10V)MTN6710-0102FNSpaceLogic KNX 2-Channel 350W Universal Dimming Master ModuleMTN6810-0102FNSpaceLogic KNX 2-Channel 350W Universal Dimming Expansion ModuleMTN627519FNM Series 2-Key Smart Panel with Coupler (Pure White)MTN627560FNM Series 2-Key Smart Panel with Coupler (Silver Gray)MTN627514FNM Series 2-Key Smart Panel with Coupler (Smoke Gray)MTN627619FNM Series 4-Key Smart Panel with Coupler (Pure White)MTN627660FNM Series 4-Key Smart Panel with Coupler (Silver Gray)MTN627614FNM Series 4-Key Smart Panel with Coupler (Smoke Gray)MTN627819FNM Series 8-Key Smart Panel with Coupler (Pure White)MTN627860FNM Series 8-Key Smart Panel with Coupler (Silver Gray)MTN627814FNM Series 8-Key Smart Panel with Coupler (Smoke Gray)MTN6212-0419FNM Series 4-Key LCD Temperature Control Panel with Coupler (Pure White)MTN6212-0414FNM Series 4-Key LCD Temperature Control Panel with Coupler (Smoke Gray)MTN6212-0460FNM Series 4-Key LCD Temperature Control Panel with Coupler (Silver Gray)MTN6214-0419FNM Series 8-Key LCD Temperature Control Panel with Coupler (Pure White)MTN6214-0414FNM Series 8-Key LCD Temperature Control Panel with Coupler (Smoke Gray)MTN6214-0460FNM Series 8-Key LCD Temperature Control Panel with Coupler (Silver Gray)NP16161_01MSFNZhenbo Series 2-Key Smart Panel, Glacier SilverNP16161_01WGFNZhenbo Series 2-Key Smart Panel, Morning Sun GoldNP16161_01SLFNZhenbo Series 2-Key Smart Panel, Smoke Cloud GrayNP16162_01MSFNZhenbo Series 4-Key Smart Panel, Glacier SilverNP16162_01WGFNZhenbo Series 4-Key Smart Panel, Morning Sun GoldNP16162_01SLFNZhenbo Series 4-Key Smart Panel, Smoke Cloud GrayNP16163_01MSFNZhenbo Series 6-Key Smart Panel, Glacier SilverNP16163_01WGFNZhenbo Series 6-Key Smart Panel, Morning Sun GoldNP16163_01SLFNZhenbo Series 6-Key Smart Panel, Smoke Cloud GrayNP16164_01MSFNZhenbo Series 8-Key Smart Panel, Glacier SilverNP16164_01WGFNZhenbo Series 8-Key Smart Panel, Morning Sun GoldNP16164_01SLFNZhenbo Series 8-Key Smart Panel, Smoke Cloud GrayNP16212_01MSFNZhenbo Series 5-Key Temperature Control Panel, Glacier SilverNP16212_01WGFNZhenbo Series 5-Key Temperature Control Panel, Morning Sun GoldNP16212_01SLFNZhenbo Series 5-Key Temperature Control Panel, Smoke Cloud GrayNP16214_01MSFNZhenbo Series 8-Key Temperature Control Panel, Glacier SilverNP16214_01WGFNZhenbo Series 8-Key Temperature Control Panel, Morning Sun GoldNP16214_01SLFNZhenbo Series 8-Key Temperature Control Panel, Smoke Cloud GrayNP16260_0104FNZhenbo Series Touch Control Panel more>
Send Inquiry

Energy-saving T5 LED tube split replacement for 28W fluorescent lamp with 3-year warranty.
$15
Category: Lighting/Energy Saving Lamps/LED Light Fixtures
Company: Shenzhen Langte Technology Co., Ltd.
Product Description: Shenzhen Langte Technology Co., Ltd. Manufacturer Energy-saving T5 LED Tube —— Split design, easy replacement for 28W fluorescent lamps, 3-year warranty for added peace of mindThis energy-efficient T5 LED tube is specifically designed to replace traditional 28W fluorescent lamps. With its split design and exceptional performance, it is an ideal choice for upgrading commercial and residential lighting. As a product supplied directly from the source manufacturer, it ensures quality while providing users with a higher cost-effective lighting solution.In terms of energy efficiency, the tube achieves the same lighting effect with lower power consumption. Compared to 28W fluorescent lamps, it reduces energy consumption by over 40%. Based on 10 hours of daily use, a single tube can save nearly 50 yuan in electricity costs per year. The energy-saving benefits are even more significant with large-scale usage, helping users easily achieve cost reduction and efficiency improvement. It utilizes high-quality LED chips, delivering a stable luminous efficacy of 130lm/W. The light is uniform and soft, with a color rendering index (Ra) ≥85, accurately reproducing object colors. Whether in offices, supermarket shelves, or home spaces, it creates a clear and comfortable lighting environment.The split structural design is a standout feature. With the lamp body and driver separated, it not only improves heat dissipation efficiency by 30% and extends the lifespan to over 50,000 hours but also fits perfectly into traditional T5 fluorescent lamp installation slots. No wiring modifications or fixture replacements are needed, enabling "plug-and-play" installation and significantly reducing installation and maintenance costs.The manufacturer offers a 3-year extended warranty, covering material and工艺 defects, providing full support from production to after-sales service. The product undergoes strict quality testing and complies with national lighting standards. It is flicker-free, UV-free, and ensures safer and healthier usage. Whether for retrofitting old fluorescent lamps or configuring lighting in new establishments, this energy-efficient T5 LED tube meets diverse needs with its high efficiency, convenience, and durability. more>
Send Inquiry

Mine Enamel U-Shaped Plastic Coal Chute with Adjustable Angle, Lightweight and Manually Portable.
$110
Category: Chemicals/Paints & Coatings/Polyurethane Paints
Company: Yantai Lesen Machinery Equipment Co., Ltd
Product Description: Due to fluctuations in raw material prices, the specific pricing and models may vary. For detailed quotations, please contact our sales staff. Thank you.Tunnel turns? Height differences? The T-shaped plastic chute flexibly handles various complex layouts! Connect one section after another, adjust angles as needed, easy installation, and smooth conveying. T-shaped plastic chute—flexible installation, modular splicing for on-site assembly with ease.Can be arranged horizontally, inclined, or turned to adapt to various equipment such as belt conveyors and scraper conveyors, making your conveying line as convenient as possible!In coal mine transportation tunnels, mining plastic chutes can serve as material conveying channels, transporting small tools, accessories, and other materials from one location to another, improving material handling efficiency.Plastic chutes offer excellent properties such as lightweight, high impact resistance, low friction coefficient, corrosion resistance, anti-aging, anti-static, and flame retardancy.U-shaped chute (arc-shaped chute) 1000*500*8mm  Length: 1 meter   Arc width (unfolded width): 500mm Thickness: 8mm Weight: approx. 6KGT-shaped chute (trapezoidal chute) 1500*500*8mm  Length: 1.5 meters  Arc width (unfolded width): 500mm Thickness: 8mm Weight: approx. 9KGAdapts to various mine conveying needs, flexible installation, and smooth conveying!Bulk orders support customization: Generally, only length, arc length, and thickness need to be provided.Color is yellow, with a smooth surface and oval holes at the four corners for chute connection.1. Low friction coefficient, easy coal sliding, high output.2. Lightweight, easy to transport and install, reducing injury risks.3. Flame retardant and anti-static properties.4. Resistant to chemical corrosion.5. Durable and highly impact-resistant, long service life, eliminating the need for coal and rockfall prevention measures.Mine chutes, coal sliding boards, coal chutes—use U-shaped for coal transportation and T-shaped for coal distribution! U-shaped: Prevents spillage + smooth flow, suitable for high volume. T-shaped: Diverts flow + stability. At transfer points, coal falls from heights and is steadily redirected through mining plastic chutes—no clogging, no leakage, no spillage. This is the power of connection and guidance! Preventing falls isn’t just a claim—it’s demonstrated by the structure of U-shaped mining plastic chutes. more>
Send Inquiry

Mine Sealing Bag 350g 400g Integrated Sac-Type Usage Quantity Convey Selection with Numbers
$12
Category: Machinery & Equipment/Packaging Related Equipment/Wrapping Machinery
Company: Yantai Lesen Machinery Equipment Co., Ltd
Product Description: Due to fluctuations in raw material prices, the pricing and models may vary. For specific quotations, please contact our sales personnel. Thank you.Mine gas sealing bags speak with numbers, meeting the needs of all scenarios from conventional to complex working conditions. From 300g to 500g gas sealing bags, there is always one that suits you!Mine Marysan sealing bags are mainly used for coal seam water injection sealing, fire prevention and extinguishing treatment sealing, mine pressure control sealing, roadway support sealing, geological exploration drilling sealing, and mine safety isolation sealing. Gas sealing bags are formed by mixing two components packaged in a bag. Don’t underestimate their role!Reaction time of mine gas sealing bags:Kneading time: Usually 10-25 seconds.Initial reaction time: 1-2 minutes.Bag expansion and rupture time: 2.5-3 minutes.Reaction completion time: 4-5 minutes.Features of gas sealing bags:The 350g Marysan sealing bag has low viscosity, allowing it to penetrate well into fine cracks.The 350g Marysan sealing bag exhibits excellent compressive performance; the solidified body has good toughness, compressing 20-30% without brittle fracture, fully adapting to the deformation of rock masses and coal seams. Once solidified, it quickly reinforces fractured substrates.How to use gas sealing bags:1.Open the bag: Place the Marysan sealing bag on a flat surface and gently pull the bag opening apart on both sides.2. Load items: Place the items to be sealed into the bag, taking care not to exceed the bag’s capacity.3. Close the bag: Hold the bag opening vertically downward and gently slide your fingertips across it. The sealing strip will automatically adhere, completely closing the bag. For fine items, use vibrating machinery to evenly distribute them inside the bag before sealing.4. Store items: Place the sealed Marysan bag in a dry, cool, and well-ventilated area, avoiding direct sunlight.One box represents trust, one bag represents responsibility! Mine sealing bags are shipped in bulk, heading in your direction, safeguarding safety with details, and conveying reassurance with quantity—this wave of security is fully maximized! more>
Send Inquiry

Mining wet dust removal fan commissioning completed, water supply spray KCS matched with roadheader.
$12500
Category: Machinery & Equipment/Desulfurization & Dust Removal/Dust Collectors
Company: Yantai Lesen Machinery Equipment Co., Ltd
Product Description: Due to fluctuations in raw material prices, the specifications and prices may vary. For specific quotations, please contact our sales staff. Thank you.In the past, working in mines meant being surrounded by dust, which not only affected work efficiency but also posed risks to our health. Since the introduction of mining dust removal fans, everything has changed. The motor operates stably with low noise, making our working environment cleaner and more comfortable. This dust removal fan for underground excavation surfaces effectively separates dust upon arrival. Come and explore it with me!The mining wet dust removal fan (hereinafter referred to as the dust removal fan) combines both ventilation and dust removal functions. It is primarily suitable for purifying dust-laden air at concentrated dust-producing operation points in coal mines and can partially remove certain components from the gas. This ensures the working environment meets industrial hygiene standards, safeguarding miners' health and mine production.Structure and Working Principle1. It mainly consists of (1) a mining local ventilation fan, (2) a water supply spray system, (3) a base, and (4) a wet vibratory string dust collector. The fan is placed in front of the dust collector.2. Working Principle: (1) As the impeller rotates, the resulting negative pressure draws dust-laden air into the fan. When the dust-laden air passes through the spray water curtain in front of the impeller, it mixes with the water mist from the curtain before entering the fan. Driven by the fan, the dust-laden air then enters the vibratory string filter plate of the dust collector.We continuously improve our mining wet dust removal fans, appreciating and supporting each other. With small daily progress in underground dust removal fans, we gradually pave the way to success. Additionally, routine wiping and tightening are all that’s needed—hardly any maintenance required.Contact: Manager Hu Mobile: 16653525598 more>
Send Inquiry

KCS-120D Mine Dust Removal Fan with Dual Function, 11kw for Worksite Dust Control
$12500
Category: Machinery & Equipment/Fans & Ventilation Equipment/Fan Coil Units
Company: Yantai Lesen Machinery Equipment Co., Ltd
Product Description: Due to fluctuations in raw material prices, the model and price may vary. For specific quotations, please contact our sales staff. Thank you.Coal mine tunneling machines use dust removal fans for wet dust extraction in mining faces. Mine fans are a type of axial flow fan. Due to the specificity of their industry and application environment, as well as significant differences in performance parameters and dimensions compared to general axial flow fans, they are classified separately. It is also important to note that they serve dual functions!Mine wet dust removal fans possess the following performance characteristics:The principle of wet dust removal fans: compact size, lightweight, and equipped with a "vibrating string filter plate" device that incorporates multiple dust removal mechanisms. The filtration wind speed of the dust collector can be increased to 10-18 m/s, which is positively correlated with dust collection efficiency. This results in a smaller space occupied per unit of air volume processed, amounting to only 10% to 40% of similar products.Performance and Main Technical Parameters1. The dust removal fan is entirely constructed from welded steel plates.2. The motor is a fan motor with durable copper rotor motors, ensuring a long service life.Our company's after-sales service:For vibrating string dust removal fans, wet dust removal fans, dust removal fan models, dust removal fan selection, and axial flow dust removal fans, if any damage occurs within 12 months due to manufacturing defects, our company will provide free repairs. For severe damage, we will be responsible for returns. This is why you should choose us.Contact: Manager Hu Mobile: 16653525598   more>
Send Inquiry