Negotiable

Category: Chemicals/Mixing Equipment/Mixers

Company: Jiangsu Zhuoya Environmental Protection Co., Ltd.

Product Description: I. Zhuoya Frame Agitator Manufacturer  JBK Frame Agitator Manufacturer  JBK Double-Layer Frame Agitator Frame agitators are selected based on the physical properties, capacity, and mixing purpose of different media, playing a significant role in accelerating chemical reaction rates and improving production efficiency. Frame agitators are generally used for mixing paste-like materials. Frame agitators can be considered a variation of paddle agitators, with a more robust structure and the ability to handle large volumes of material. When the bottom shape of such an agitator resembles the lower head of the reactor, it is commonly referred to as an anchor agitator. Frame agitators have a large diameter, typically 2/3 to 9/10 of the reactor's inner diameter, operating at 50–70 rpm. For low-viscosity liquids, the diameter ratio of the anchor impeller to the tank is 0.7–0.9, while for high-viscosity liquids, it is 0.8–0.95, with speeds usually ranging from 10 to 50 rpm. The small gap between the frame agitator and the tank wall facilitates heat transfer processes. At high speeds, the liquid driven by the agitator blades removes the stagnant layer from the reactor wall; at low speeds, agitators with scrapers provide excellent heat conduction. These agitators are commonly used for heat transfer, crystallization operations, and mixing high-viscosity liquids, high-concentration slurries, and settling slurries. Anchor and frame agitators belong to the same category, collectively referred to as anchor-frame agitators. To increase the mixing range and remove residues or liquid layers on the tank wall, the outer contour of the anchor-frame agitator closely matches the inner wall of the mixing tank. The bottom shape is adapted to the tank's contour, including elliptical, conical, and other forms. To enhance the mixing range for high-viscosity materials and improve the impeller's rigidity, vertical blades and crossbeams are often added to anchor and frame agitators, resulting in a variety of structural forms for anchor-frame agitators. II. Based on their shape, paddle types can be broadly classified into: anchor type, elliptical frame type, conical bottom frame type, square frame type, and anchor-frame type. Zhuoya Frame Agitator Manufacturer  JBK Frame Agitator Manufacturer  JBK Double-Layer Frame Agitator III. Applicable Viscosity Maximum applicable viscosity is 200–300 Pa·s. IV. Application Areas Anchor-frame agitators typically operate at low speeds and do not generate significant shear forces when mixing low-viscosity liquids, making them unsuitable for liquid-liquid and gas-liquid dispersion. On the other hand, these impellers generate high flow rates within the tank, dominated by horizontal circulatory flow, and do not provide good mixing uniformity. However, the flow velocity near the tank wall is higher than with other impellers, achieving a high heat transfer film coefficient. Therefore, they are commonly used for heat transfer and crystallization operations. Additionally, due to their large blade diameter and proximity to the tank bottom, they are often used to mix high-concentration slurries and settling slurries. They are also frequently employed for mixing high-viscosity fluids. V. Flow State Horizontal circumferential flow at different heights. VI. Structure The connection method of anchor-frame agitators to the agitator shaft is similar to that of paddle agitators. The end of the impeller connected to the agitator shaft is made into a semi-circular collar, and the two semi-circular rings on both sides of the blades are clamped onto the agitator shaft with bolts, while through-shaft bolts secure the blades to the agitator shaft. Due to the large outer dimensions of the impeller, blades are mostly bolted together for easy assembly and disassembly, with only small-sized ones cast or welded. Impellers are mostly made of flat steel or angle steel. To enhance the strength of the impeller, reinforced steel plates may also be used.   Model Parameters Tank Dimensions m Agitator Dimensions mm Motor Power KW Speed r/min A×B H D h0 h1 Ⅰ Ⅱ Ⅲ more>

$9000

Category: Electrical Equipment & Supplies/Power Distribution & Transmission/Compact Substations

Company: Zhejiang Hongyi Electric Co., Ltd.

Product Description: more>

Negotiable

Category:

Company: Yangzhou Jient Electrical Co., Ltd.

Product Description: The power busbar box plays a crucial role in power systems. Here is a detailed analysis of it:1. Definition and ApplicationThe power busbar box is a device used in the lead-out circuit of generators with a capacity of 200MW and above. It adopts phase-separated enclosed busbars and is enclosed by the busbar box to achieve better insulation effect.2. Structure and Features1.Structure: A busbar box is usually composed of conductors, insulating materials, enclosures, accessories and other parts. The conductor is the main part of the busbar, responsible for transmitting electric energy; the insulating material is used to isolate the conductors to prevent short circuits and current leakage; the enclosure plays a role in protection and support, giving the busbar better mechanical strength and stability; accessories include connectors, support frames, etc., which are used to connect and fix the busbar.2.3.Features:4.1.Excellent insulation effect: Enclosed by the busbar box, the conductors inside the box are isolated from the external environment, effectively preventing short circuits and current leakage.2.Compact structure: The busbar box shares one enclosure for multiple conductors, greatly reducing the space occupied by the busbars and making the layout of the power system more compact and reasonable.3.Good heat dissipation performance: The busbar box adopts a special enclosure design and heat dissipation structure, enabling the busbars to maintain good heat dissipation performance when transmitting large currents, ensuring the stable operation of the power system.3. Applications and Functions1.Applications: Power busbar boxes are widely used in the lead-out circuits of generators with a capacity of 200MW and above, as well as places requiring efficient and stable power supply such as large industrial facilities, commercial buildings and residential buildings.2.3.Functions:4.1.Power distribution: As an important part of the power system, the busbar box can connect busbars of different sections to achieve efficient power distribution.2.Circuit protection: The insulating materials and enclosures inside the busbar box can effectively protect the circuit from external environmental damage, improving the safety and reliability of the power system.3.Branch line expansion: The busbar box can connect multiple branch lines to meet the needs of complex power systems.4. Installation and Maintenance1.Installation: When installing the busbar box, it is necessary to ensure its coordination with the surrounding environment and the reliability of connection with other electrical equipment. At the same time, attention should also be paid to the fixing and support of the busbar box to ensure its stability and safety.2.Maintenance: The maintenance of the busbar box mainly includes regular inspections, cleaning and repairs. By regularly checking the status of components such as the appearance, connectors and insulating materials of the busbar box, potential safety hazards can be detected and handled in time. At the same time, it is also necessary to regularly clean the dust and dirt inside the busbar box to maintain its good heat dissipation performance and insulation effect. more>

Negotiable

Category: Others

Company: Huabiao Testing (Hunan) Co., Ltd.

Product Description: Quenching Furnace Temperature Deviation Black Box Testing, Data Collection for Natural Gas Furnaces for Casting, Tempering Furnaces, and Large Box FurnacesQuenching Furnace Temperature Deviation Black Box Testing, precise control of heat treatment quality, trust Huabiao Testing!In the field of metal heat treatment, the stability of the quenching furnace directly affects the hardness and quality of products. Furnace temperature deviation, as one of the key indicators for evaluating quenching furnace performance, requires precise measurement and effective control. To address this, Huabiao Testing (Hunan) Co., Ltd. offers quenching furnace temperature deviation black box testing services, leveraging professional technical expertise to ensure the performance of your equipment.1. Professional and Authoritative, the Trusted ChoiceAs a CNAS-accredited third-party testing company (Registration No. CNAS L17610), Huabiao Testing adheres to the mission of "delivering quality trust and serving a healthy life with credibility," committed to providing comprehensive third-party metrology services to enterprises and institutions. Our services cover multiple fields, with extensive experience and advanced technology, particularly in heat treatment furnace testing.2. Precise Measurement, Effective ControlThe quenching furnace temperature deviation black box test uses high-precision sensors and advanced data acquisition systems to monitor and record temperature changes in various areas of the furnace in real time, accurately assessing furnace temperature deviations. Our professional technicians will conduct in-depth analysis of test data in accordance with national and industry standards (such as GB/T 9452-2023, AMS 2750H, etc.), providing scientific solutions to help you effectively control furnace temperature deviations and improve heat treatment quality.3. Comprehensive Services to Meet Your NeedsWe understand that each client has specific requirements, so we offer customized service solutions. Whether it's testing items such as furnace temperature uniformity, temperature stability, or furnace temperature stability for quenching furnaces, or black box testing services for equipment with different heating methods like resistance furnaces, gas furnaces, and natural gas furnaces, we provide professional services. Additionally, we offer value-added services such as testing, inspection, and technical consultation to provide comprehensive support for your equipment operation.4. Efficient and Convenient, Thoughtful ServiceWe always prioritize our clients, base our services on technology, and align with client needs. From appointment consultation to test implementation, report issuance, and follow-up support, our service process is efficient and convenient, accompanying you through every critical step. Our professional technicians will answer your questions, provide technical support, and ensure your testing needs are met.5. Collaborate for a Shared FutureAs a comprehensive third-party metrology, testing, and certification company integrating metrology calibration, inspection, testing, and technical services, Huabiao Testing (Hunan) Co., Ltd. possesses extensive industry experience and professional technical expertise. Choosing Huabiao Testing means choosing quality and trust. We will work with you to enhance product quality and production efficiency, injecting new momentum into your business development.Contact InformationAddress: 6th Floor, Building 4, Area C, Jindao Park, No. 179 Huizhi Middle Road, High-tech Development Zone, Changsha CityMobile: 153 0843 2320Website: http://www.hbjc-hn.comLandline: 0731-85586260Email: CNASL17610@163.comContact us now! Let us work together to provide precise solutions for your quenching furnace temperature deviation issues and advance the progress and development of heat treatment technology! more>

Negotiable

Category: Electrical Equipment & Supplies/Low Voltage Electrical/Low Voltage Fuses

Company: Jiangsu Jiayuan Risheng Industrial Development Co., Ltd.

Product Description: Name: Stainless Steel Distribution BoxProcess: Fine PolishingMaterial: 304 Stainless SteelSpecifications: Multiple Sizes AvailableColor: Natural Stainless Steel FinishCustomization: Please Contact Customer ServiceDouble-slope top provides dust and rain protection. Door frame seal features integrated foam pouring for insulation and sealing, preventing rainwater leakage.Made of 304 stainless steel, with a smooth surface, resistant to deformation, and durable for long-term use.The heat dissipation grille design effectively reduces internal temperature. more>

Negotiable

Category: Instruments & Meters/Testing Machines/Other Testing Machines

Company: Huabiao Testing (Hunan) Co., Ltd.

Product Description: Heating and Insulation Furnace Temperature Deviation Black Box Testing, Gas Furnace Heating Furnace Large Box Furnace Testing ServicesProfessional Solutions for Heating and Insulation Furnace Temperature Deviation Black Box Testing, Huabiao Testing (Hunan) Co., Ltd.Precise Temperature Control, Quality AssuranceIn heat treatment processes, furnace temperature uniformity and stability directly determine material performance and product quality. Leveraging the technical strength of a CNAS-accredited laboratory and CMA certification, Huabiao Testing offers heating and insulation furnace temperature deviation black box testing, with a focus on full-process data collection and intelligent analysis!Core Testing Items and StandardsBased on the characteristics of heating and insulation furnaces, we strictly conduct tests according to the following standards:Determination Method for Effective Heating Zone of Heat Treatment FurnacesHigh-Temperature Measurement SpecificationsAerospace Component Heat Treatment Furnace Testing StandardsGas Furnace Temperature Uniformity Testing MethodsKey Testing Dimensions:• Furnace Temperature Uniformity | Temperature Field Distribution | Furnace Temperature Stability | Real-Time Temperature Difference Monitoring | Thermal Cycle Fluctuation AnalysisBlack Box Testing Technical AdvantagesFull-Cycle Data CollectionUsing high-precision sensors and intelligent monitoring systems, we record temperature data from multiple furnace zones in real time, covering all stages: heating, insulation, and cooling.Multi-Scenario AdaptabilityCompatible with various heating methods, including resistance furnaces, gas furnaces, and vacuum furnaces, covering all types of equipment such as car-bottom furnaces, pit furnaces, and bell furnaces.Compliance AssuranceStrictly adhering to international standards, we provide authoritative test reports to help companies pass system certifications.Why Choose Huabiao Testing?Authoritative Qualifications• CNAS L17610 Accredited Laboratory, globally recognized test results• CMA Certification + Triple System Certification (Quality/Environment/Occupational Health and Safety)Service Capabilities• Industry-Wide Coverage: Services span aerospace, automotive manufacturing, metal products, and more• Diverse Testing Scenarios: Supports all functional heat treatment equipment, including quenching furnaces, tempering furnaces, vacuum furnaces, and nitriding furnaces• One-Stop Solutions: From black box testing to data analysis and process improvement recommendations, we provide full technical supportService ProcessNeeds Communication: Customize test plans and clarify testing standards and key indicatorsOn-Site Sensor Placement: Deploy sensors based on equipment structure to cover the effective heating zoneData Collection: Record full-cycle temperature curvesReport Delivery: Provide test reports, including data charts and deviation analysisTake Action Now and Unlock the Code to Precise Temperature Control!Quick Response: Call 153 0843 2320 or 0731-85586260Technical Consultation: Send requirements to CNASL17610@163.comOnline Booking: Visit our official website www.hbjc-hn.comAddress: 6th Floor, Building 4, Area C, Jindao Park, No. 179 Huizhi Middle Road, High-Tech Development Zone, Changsha CityHuabiao Testing: Building Industrial Quality with Credible Services, Empowering Smart Manufacturing with Data! more>

Negotiable

Category: Others

Company:

Product Description: Dingwang Building Materials Co., Ltd., Qingxu County, Taiyuan City, Shanxi Province Website: http://www.qingxudingwang.com Contact: Mr. Hu Phone: 18703401090 Detailed Description of Hollow Core Slabs: **Economic Advantages of Hollow Core Slabs in Underground Engineering** 1. **Reduction in Steel and Concrete Usage**: Hollow core slabs significantly reduce the amount of steel and concrete compared to beam-slab structures. For example, in an underground garage with an 8.4m × 8.4m column span, 1.5m of overburden, and a fire truck load of 20 kN, steel usage is reduced by 22 kg/m², and concrete thickness is reduced by 40 mm. The larger the span and load, the greater the economic benefits. However, hollow core slabs incur an additional cost for the hollow components, which is not present in beam-slab structures. The actual savings depend on current market prices. 2. **Reduction in Excavation and Earthwork Transport**: Based on experience, using hollow core slabs in underground construction can reduce floor height by 300–500 mm for non-civil defense areas and 400–600 mm for civil defense structures. For a typical two-level underground building, the total height reduction can reach 800–1,200 mm. With a 1-meter reduction in floor height, earthwork excavation decreases by at least 1 m³ per square meter, saving approximately ¥35/m² in urban areas (based on an excavation cost of ¥35/m³). 3. **Reduction in Retaining Wall Piling Work**: Hollow core slabs reduce excavation depth, lowering earth pressure and resulting in a 13% reduction in pile length and embedment depth. Pile diameter, reinforcement, number and length of anchor rods, and the size of internal bracing components are also reduced. 4. **Foundation Slab Benefits**: A 1-meter reduction in excavation depth lowers the groundwater level by 1 meter, reducing water pressure by P = 1 × 10 = 10 kN/m². This decreases the load on the foundation slab and ground beams by 10 kN/m², allowing for reduced reinforcement, cross-sectional dimensions, and waterproofing requirements. In areas with high groundwater levels, the number and length of uplift piles can also be reduced. 5. **External Wall Benefits**: - Height: Reduced floor height lowers external wall height. - Earth Pressure: Lower excavation depth reduces earth pressure on walls. - Water Pressure: Reduced groundwater level decreases water pressure on walls. - Reinforcement: Lower pressures allow for reduced wall reinforcement. - Waterproofing: Shorter walls reduce the amount of waterproofing material needed. - Impermeability Grade: With unchanged wall thickness, the impermeability grade can be lowered. 6. **Staircase Savings**: Reduced floor height decreases the number of stair flights, saving steel and concrete. 7. **Underground Garage Ramp**: Ramps can be shortened while maintaining the same slope. 8. **Reduced Dewatering Costs**: Lower excavation depth, especially for multi-level basements, significantly reduces dewatering expenses. 9. **Reduced Wall Plastering Work**: The flat underside of hollow core slabs eliminates the need for beam-side plastering, reducing labor and material costs. 10. **Vertical Component Savings**: Columns and walls can be shorter while maintaining the same clear height, resulting in noticeable savings. **Functional and Operational Advantages** 1. **Formwork and Plastering Savings**: Only flat formwork is needed, reducing formwork loss and increasing reuse rates. Beam-side plastering is eliminated. 2. **Faster Construction**: Construction time is shortened by approximately 30%, reducing equipment rental and labor costs. 3. **Fewer Smoke Detectors and Sprinklers**: The flat slab surface allows for a reduction of 5/6 in smoke detectors and 1/3 in sprinklers. 4. **Savings in Vertical MEP Components**: Reduced floor height shortens vertical pipes, ducts, and elevator shafts. For a three-level basement, savings can exceed 1.2–1.8 meters. 5. **Shorter Ramps and Increased Parking Space**: Lower floor height allows for shorter ramps, increasing usable parking area. 6. **Easy Drilling and Mounting**: Holes can be drilled conveniently, and expansion bolts can be installed without precise marking. 7. **Simplified Pipeline Installation**: Ducts and pipes can be installed without detours or diameter changes due to the absence of beams, reducing installation time and cost. 8. **Noise Reduction**: The hollow structure dampens impact noise from vehicles. 9. **Crack Resistance**: The dense network of hidden ribs in hollow core slabs minimizes cracking and enhances structural integrity. 10. **Thermal Insulation**: The closed cavities reduce heat transfer, improving energy efficiency and lowering air conditioning costs. **Certifications and Applications** - National 863 Program Research Achievement - Key Science and Technology Promotion Project by the Ministry of Construction - Suitable for large loads and spans with remarkable economy - Environmentally friendly, energy-efficient, and noise-reducing - Widely adopted in practice more>

$Negotiation

Category: Others

Company: Dalian Shunde Trade Co., Ltd.

Product Description: Frozen product inner box-Dalian WOSEN Plastic Industry Co., Ltd. (Dalian Shunde Trade Co., Ltd.) was founded in 2005.We are a professional manufacturer of food packaging materials. The registered capital is 5 million RMB, total investment is 70 million RMB. It is divided into two factories in Dalian and Shenyang city. Dalian factory covers 7,000㎡, including a 300,000-level purification workshop of 1200㎡.Shenyang factory covers 15,000 ㎡ including a 300,000-level purification workshop of 10,000 ㎡. We build workshop in accordance with food-grade GMP standards, and passed the ISO9001 and ISO22000 certification. There are more than 260 employees, 80% of which are core staff, forming a excellent work team. We are a comprehensive plastics processing enterprise, which integrates injection molding, blister, sheet extrusion and cup making, can produce 200-2000ml plastic barrels of PE and PP materials. We strictly implement 6S management standards, and we believe that always guarantee the advancement of production equipment is our biggest advantage. At present, we mainly produce plastic packaging products for major dairy companies in the country. Such as plastic lids for milk powder cans, yoghurt cups, milk buckets, etc. Secondly, produce plastic packaging products for catering industry, seafood, cold drinks, industry, pets, wipes, etc.Among them, milk powder bucket lids, sushi trays, frozen seafood trays and other products are exported to the United States, Australia, Japan, Singapore and other places. The main processing materials are PP, PE, PS, PET, PVC, etc.We can provide customized supporting services for the dairy industry, food processing industry and other industries. The main customers are Mengniu Dairy, Wandashan Dairy, Huishan Dairy, Yili Dairy, Zhangzidao Group, Yoshino, Yahui Food, Alice, Dalian Times Marine Food, Dalian Gaishi Food, Dalian Kowa Foods, etc. Link: Custom Yogurt Cup China,Milk cover China , Milk bucket China, Disposable plastic food box China, China lunch box manufacturer, China food tray,Custom sushi tray China more>

$1

Category: Others

Company: Dalian Shunde Trade Co., Ltd.

Product Description: China lunch box manufacturer-Dalian WOSEN Plastic Industry Co., Ltd. (Dalian Shunde Trade Co., Ltd.) was founded in 2005.We are a professional manufacturer of food packaging materials. The registered capital is 5 million RMB, total investment is 70 million RMB. It is divided into two factories in Dalian and Shenyang city. Dalian factory covers 7,000㎡, including a 300,000-level purification workshop of 1200㎡.Shenyang factory covers 15,000 ㎡ including a 300,000-level purification workshop of 10,000 ㎡. We build workshop in accordance with food-grade GMP standards, and passed the ISO9001 and ISO22000 certification. There are more than 260 employees, 80% of which are core staff, forming a excellent work team. We are a comprehensive plastics processing enterprise, which integrates injection molding, blister, sheet extrusion and cup making, can produce 200-2000ml plastic barrels of PE and PP materials. We strictly implement 6S management standards, and we believe that always guarantee the advancement of production equipment is our biggest advantage. At present, we mainly produce plastic packaging products for major dairy companies in the country. Such as plastic lids for milk powder cans, yoghurt cups, milk buckets, etc. Secondly, produce plastic packaging products for catering industry, seafood, cold drinks, industry, pets, wipes, etc.Among them, milk powder bucket lids, sushi trays, frozen seafood trays and other products are exported to the United States, Australia, Japan, Singapore and other places. The main processing materials are PP, PE, PS, PET, PVC, etc.We can provide customized supporting services for the dairy industry, food processing industry and other industries. The main customers are Mengniu Dairy, Wandashan Dairy, Huishan Dairy, Yili Dairy, Zhangzidao Group, Yoshino, Yahui Food, Alice, Dalian Times Marine Food, Dalian Gaishi Food, Dalian Kowa Foods, etc. Link: Custom Yogurt Cup China,Milk cover China , Milk bucket China, Disposable plastic food box China, China lunch box manufacturer, China food tray,Custom sushi tray China more>

$0.8-2.0

Category: Chemicals/Plastics & Products/Plastic Additives

Company: Guangzhou Zongxing Printing Co., Ltd

Product Description: Founded in 1999, for 23 years, we are an experienced custom manufacturer of printed packaging boxes. Including Cosmetics Box, Skincare Box, Gift Box, Collapsible Magnetic Gift Box, Wine Packaging Box, Food Packaging Box, Corrugated Mailer Box, Paper Bag, Adhesive Label/Sticker,etc . Please allow me to get straight to the point. If you are in searching of paper packaging supplier, I would like to pitch you the following benefits which are something you shouldn’t miss. ·Competitive price becausethere are no middleman between us. ·Customized packaging design and any requirement can be met for both OEM and ODM. ·MOQ only 500pcs/design is acceptable. ·Sampling: about 5 days delivery after design confirmed. ·Production Lead time: about 7 working days delivery after design confirmed. ·Timely delivery as a manufacturer we could arrange the shipment once we finish production. To make sure you would know more information about us . Please go and check more details via our website. more>

$2.69

Category: Chemicals/Chemical Intermediates/Intermediate Compounds

Company: Unity Packing Provider Xiamen Co., Ltd

Product Description: Gift box more>

$2.69

Category: Chemicals/Chemical Intermediates/Intermediate Compounds

Company: Unity Packing Provider Xiamen Co., Ltd

Product Description: Tea sets, small household appliances and other packaging more>

$4.05

Category: Chemicals/Plastics & Products/Plastic Additives

Company: Unity Packing Provider Xiamen Co., Ltd

Product Description: Tea, tonic, gift packaging more>

$3.19

Category: Others

Company: Xiamen Yixin Packaging Technology Co., Ltd.

Product Description: Special paper processing more>

$30

Category: Electrical Equipment & Supplies/Low Voltage Electrical/Low Voltage Switchgear

Company: Shenglong Electric Group Co., Ltd

Product Description: Shenglong Electric was founded in 1979 and is a leading enterprise in the fields of smart grid and smart energy management. Committed to providing users with integrated industry solutions for smart energy system planning and design, intelligent transmission and distribution equipment manufacturing, power and energy internet engineering general contracting, and operation and maintenance services. Assist users in providing high power and stable levels of security, reliability, and intelligence in energy systems, providing high energy efficiency, and reducing carbon emissions. Shenglong Electric's business covers more than 50 countries worldwide, with offices in over 30 countries more>

$30

Category: Electrical Equipment & Supplies/Power Distribution & Transmission/Power Distribution Boxes

Company: Zhangzhou Xinyicheng Automation Technology Co., Ltd

Product Description: Quanzhou Huangqi Color Printing Co., Ltd. specializes in the production of plastic film packaging bags, with a stable business and long-term experience. We hope to find ambitious individuals to develop together and create a better future. The company provides food and accommodation. more>

Negotiable

Category: Others

Company: Wuhan Norton Electric Co., Ltd.

Product Description: Product Introduction       The NDXC series voltage regulating control box can smoothly output 0-250V AC voltage and features multiple monitoring and protection functions. It is used in conjunction with test transformers, current boosters, and other equipment for electrical testing.Product Features☆ Monitoring functions: Output current   Meter voltage  Zero position indicator   On/Off indicator  Timer indicator☆ Protection functions: Overcurrent protection   Time relay☆ Utilizes a new type of time relay with a wider timing range.☆ Employs a new type of current relay for higher accuracy and reliability, ensuring personal and equipment safety.☆ Reasonable structure, compact size, and lightweight.Technical ParametersModelCapacity (kVA)Power SupplyOutputDimensions (mm)Reference Weight (kg)PhaseVoltage (V)Frequency (Hz)Voltage (V)Current (A)NDXC-3312205024013.6410*310*24517NDXC-5512205024022.7410*310*24520NDXC-101012205024045.5430*340*24530 more>

$88

Category:

Company:

Product Description: 1. The beef box comes in two styles: the three-opening box and the brick box designed for use with the box-forming machine.2. The conventional style features a three-opening design with a lid, and it can also be made as a connected single piece. Both square and semi-circular styles are available, and customization is possible for weights ranging from 5 to 15 kilograms. For specially customized styles, the overall quantity requirement is slightly higher.3. Materials such as stainless steel plates 304/201, galvanized steel plates, and aluminum alloy freezing trays can be used. The craftsmanship is exquisite, and various specifications and sizes of beef pressing boxes, mutton pressing boxes, food pressing boxes, and freezing trays can be customized.4. The weight corresponding to specific dimensions varies slightly depending on the style. We have created a general size comparison chart to address this common situation.5. For the 304 material, the plate thickness can be 1.5mm or 2.0mm, but the buckle is made of 201 material due to material selection. more>

Negotiable

Category: Chemicals/Plastics & Products/Plastic Additives

Company: Huzhou Jingshantang Biotechnology Co., Ltd.

Product Description: Daoshan Gift BoxProduct DescriptionThe Daoshan Gift Box is a pressed candy gift set primarily made from rice bran fatty alcohol. It includes two products: Jingxin Tablets and Jingmei Tablets, each in two sets. The octacosanol content is suitable for sub-healthy individuals, those prone to fatigue, and people with low immunity. It serves as an excellent companion for night owls, frequent takeout consumers, and those with oily diets.Jingxin Tablets are infused with xylitol and feature a refreshing orange flavor, providing a pleasant consumption experience. They are ideal for middle-aged and elderly individuals, as well as those monitoring their sugar intake.Jingmei Tablets, based on rice bran fatty alcohol, are enriched with Damascus rose, French Bordeaux grape seed, vitamin C, and other pure plant extracts. They help nourish the skin, improve complexion, and alleviate eye strain. Particularly suitable for busy office workers, frequent users of electronic devices, and those with less-than-ideal skin conditions. This premium gift box is perfect for gifting, visiting relatives, or friends.Product Specifications:Jingmei Tablets (Rose Grape Seed Flavor): 0.75g * 60 tablets/bottle * 2Jingxin Tablets (Orange Flavor): 0.75g * 60 tablets/bottle * 2Precautions:● The recommended daily intake of rice bran fatty alcohol is ≤300 mg. Do not exceed 6 tablets per day.● Not suitable for infants, young children, or pregnant women. Unsuitable groups should be indicated on the label and instructions. more>

$220

Category: Others

Company: Shanghai Qiaoyi Electrical Equipment Co., Ltd.

Product Description: Product Name: Handheld Enclosure, Handheld Box, Handheld Operation Box, Operation Box, Operation Case, Button Box, Handheld Control Box, Handheld Button Box, Emergency Stop Button Box, Emergency Stop Operation Box, Handheld Operation Case, Handheld Chassis, Handheld Plastic Enclosure, Plastic Box, Plastic Button Box, Plastic Emergency Stop Button BoxIntroducing advanced foreign design concepts and production technologiesPioneering domestic handheld enclosuresEnclosure: Unique design, sturdy and durable, easy to operateMaterial: Enclosure and Handle: NylonPanel: Aluminum Plate (Silver Gray/Gray), AnodizedProtection Rating: IP65Sealing: EPDMOperating Temperature: -40℃ to +40℃Color: YellowAccessories: Anti-bending Cable Connector, Panel, Wall MountApplication: Widely used in mechanical equipment, CNC handwheels, emergency stop buttons, general buttons, light-touch membrane buttons, etc.Service: Special processing such as custom hole drilling and PVC panel customization available more>