$65

Category: Chemicals/Phenols/Hydroquinone

Company:

Product Description: The strength of the cement concrete pavement is not equivalent to C25. Additionally, the surface should be treated by milling, chiseling, grinding, sandblasting, or roughening (for newly poured concrete), preferably exposing the aggregate over a large area. On this basis, one to two coats of PM-101 penetrating sealer should be applied for sealing treatment.Clean, dry asphalt pavements in good functional condition do not require sealing treatment.2.5 Construction Environment Requirements(1) The curing temperature of the polymer cast-in-place diamond tactile paving material must not be lower than 5°C. Below this temperature, the polymer curing reaction will rapidly decrease or may not proceed chemically, or only partially and incompletely. This will result in the colored pavement failing to meet performance standards. Therefore, the ambient temperature during construction must not be below 5°C.(2) Diamond tactile paving is a natural room-temperature curing material, where room temperature is defined as 5°C to 45°C. As the ambient temperature approaches the upper limit, the curing and drying speed increases. Excessively high ambient temperatures may make construction difficult. Therefore, the recommended construction ambient temperature is 10°C to 35°C.(3) Diamond tactile paving is a water-based environmentally friendly material, with more lenient humidity requirements compared to solvent-based materials. However, when the relative humidity of the air is saturated (100%), internal moisture cannot evaporate, leading to no curing or abnormally slow drying. Therefore, the recommended ambient humidity is between 50% and 90%. Above this humidity, especially at lower temperatures (below 10°C), issues such as reduced surface hardness, whitening, loss of gloss, stickiness, and re-adhesion may occur.(4) Construction should be carried out under favorable weather conditions, without rain, snow, strong winds (wind force less than level 5), or sandstorms.(5) At room temperature (10°C to 35°C), the surface drying time for diamond tactile paving material is 6 hours, with complete drying requiring 18 hours. The surface drying time for the surface sealer is 1 hour. If sudden rain or artificial wetting occurs during this period, or if construction is carried out under dew condensation at night, it will result in construction failure. Depending on the specific situation, measures such as rework, additional paving, or multiple sealing treatments may be necessary. more>

$100

Category: Chemicals/Inorganic Salts/Fluorides

Company: Hubei Eflu New Materials Co., Ltd.

Product Description: The first type: Industrial grade. This is currently the most widely used type. Its application fields are very broad,1. Sodium fluoride (NaF) is an important fluoride salt and a raw material for manufacturing other fluorides.2. Used as an agricultural insecticide, fungicide, wood preservative, water treatment agent, ceramic pigment, manufacturing of rimmed steel, light metal fluoride treatment agent, etc.3. In the production of sealing materials and brake pads, it increases wear resistance. In mechanical blade planer knives with steel inserts, it enhances welding strength.4. Added in enamel, pharmaceutical industries, paper production, and as a flocculant in building materials.5. In the coating industry, it serves as a phosphating accelerator, stabilizing the phosphating solution, refining the phosphating process, and improving the performance of the phosphating film.The second category: Toothpaste gradeAs the name implies, it is mainly added to toothpaste. Adding sodium fluoride to toothpaste can help prevent cavities because fluoride interacts with tooth enamel to form fluorapatite on the surface, enhancing the hardness and acid resistance of the enamel, reducing plaque formation, and decreasing the incidence of cavities. Fluoride toothpaste indeed has certain anti-cavity effects. As early as the mid-19th century, Europe had pregnant women take calcium fluoride orally to prevent cavities; by the 20th century, fluoride was recognized worldwide as an effective anti-cavity agent. In general fluoride toothpaste, the sodium fluoride content is 0.22-0.33%, and the sodium monofluorophosphate content is 0.76%. Such small amounts are sufficient to provide good protection for human teeth, reducing the prevalence of cavities by 28%.The third category: Spherical or flake sodium fluorideUsed as a UF3 adsorbent in the nuclear industry. Applied in the adsorption of special gases such as fluorine gas, absorbing hydrogen fluoride impurities.The fourth category: Optical grade sodium fluorideMainly used in optical fields such as optical glass, optical fibers, and optical crystals.The fifth category: Battery grade fluoridePrimarily used as an additive in electrolytes, either as an additive or as a raw material for sodium hexafluorophosphate in sodium battery electrolytes. Currently, CATL has taken the lead in commercializing this application.The sixth category: High-purity or reagent gradeThis type mainly requires high purity and is generally used as a reagent.The above are several common types of sodium fluoride. more>

Negotiable

Category: Others

Company: Henan Huapu New Energy Technology Co., Ltd.

Product Description: Background Description:With the rapid development of economy and technology, energy consumption is increasing, and energy has become the material foundation for a country's economic growth and social development. Achieving a low-carbon economy, energy efficiency, and green development has become an urgent priority.Recirculating cooling watercontains a large amount of low-temperature waste heat, which can be recovered and reused to save enterprise energy consumption, reduce costs, improve efficiency, and support green and low-carbon development. Waste Heat Source Introduction:The temperature of recirculating cooling water is approximately38-40℃, and it is cooled to around32℃using cooling towers for recirculation. A significant amount of thermal energy is wasted, but this heat from recirculating cooling water can actually be recovered and utilized. Waste Heat Utilization Methods:Utilizeour company's"Huapu New Energy"proprietarywaste heatutilization systemto recover waste heat from recirculating cooling water, heating boiler makeup water or for domestic heating. Recovering the heat from recirculating cooling water reduces thermal energy waste, eliminates white mist from cooling towers, saves energy and improves efficiency for enterprises, enhancing their market competitiveness. Waste Heat Utilization System Features:High efficiency and energy saving,stable and reliable,intelligent control,easy maintenance,environmentally safe,wide range of applications In summary,the waste heat utilization system, with its features of high efficiency and energy saving, stability and reliability, intelligent control, easy maintenance, environmental safety, and wide application range, has become an indispensable energy-saving and environmental protectionsysteminmodern industry. more>

$1

Category: Electrical Equipment & Supplies/Low Voltage Electrical/Reactors

Company: Yueqing Zhenlei Explosion-proof Electrical Appliance Co., Ltd.

Product Description: Explosion-proof plug, also known as anti-explosion plug, anti-surge washer, anti-shock wave washer, etc.It is made of special rubber material, featuring high pressure resistance, strong elasticity, and ease of use.Application scope of explosion-proof plugs:1. Suitable for connection points of various pipelines and equipment;2. Used at valve and valve connection points in pressure pipeline systems;3. Applied for connections at the flange joints of pump inlets and outlets;4. Used for connections between container equipment and pipeline flanges;5. Can be used in vacuum systems or suction vacuum system pipelines.6. Applicable in explosive environments in industries such as petroleum, petrochemical, and chemical for the installation of various pipelines and equipment. more>

$3000

Category: Others

Company: Nanjing Bohong Environmental Protection Technology Co., Ltd.

Product Description: Sound Enclosure is an effective noise reduction measure that encloses noisy equipment, effectively blocking the transmission and diffusion of noise to reduce its impact on the environment.I. Application Scope● Machine and equipment sound enclosures● Air compressor, fan, and water pump sound enclosures● Online inspection sound enclosures● Outdoor air conditioning unit sound enclosures● Workshop offices and operation roomsII. Sound Insulation PrincipleThe outer shell of the sound enclosure is made of a layer of airtight, heavy, and rigid metal material, typically 2–3 mm thick steel plate, covered with a damping layer. The damping layer is often made of fiber fabric or fiber material impregnated with damping glue (such as asphalt-impregnated burlap, fiberglass cloth, felt, or asbestos wool), and sometimes specially formulated damping paste is used.The damping layer is added to the outer shell to avoid the coincidence effect and low-frequency resonance of the plate. The shell can also be made of wood or plastic boards, while lightweight sound insulation structures may use aluminum plates. High-performance sound enclosures can be constructed as double-layer shells, with the inner layer being thinner than the outer layer; the spacing between the two layers is typically 6–10 cm, filled with porous sound-absorbing material. The inner side of the enclosure is lined with sound-absorbing material to absorb sound and reduce noise within the cavity. This sound-absorbing layer is covered with a perforated protective panel, with perforations accounting for about 20–30% of the panel area.Between the enclosure and the machine, as well as between the enclosure and the foundation, rubber padding is usually installed to prevent vibration transmission. Openable access doors and observation windows must be well sealed. For equipment that requires heat dissipation, necessary ventilation ducts should be included in the sound enclosure. These ducts must have sound-absorbing structures or be equipped with silencers. When designing a sound enclosure, it is important to meet process and maintenance requirements, and sometimes measures must be taken to prevent oil contamination, dust, and corrosion. more>

Negotiable

Category: Health & Medical/Pharmaceuticals & Raw Materials/Chemical APIs

Company: Nanjing Huizhe Trading Co., Ltd.

Product Description: Our company has a large quantity of imported hexylene glycol from France available for supply. Factories in need are welcome to negotiate pricing. Brands include Solvay (Rhodia) from France, Pashu from India, and Arkema from France. Packaging specifications are 185-195KG. Bulk orders enjoy preferential pricing with guaranteed quality and quantity. As a direct supplier, we offer more reliable and convenient sourcing. more>

Negotiable

Category: Others

Company:

Product Description: Advantages and Disadvantages of Cast-in-Place Reinforced Concrete Hollow Floor Slabs Shanxi Province, Taiyuan City, Qingxu County Dingwang Building Materials Co., Ltd. Website: http://www.qingxudingwang.com Contact: Mr. Hu Phone: 18703401090 Through a comprehensive review of cast-in-place reinforced concrete hollow floor slabs and based on extensive engineering practice, this article systematically summarizes the advantages and disadvantages from both design and construction perspectives, laying the foundation for promoting the application of hollow floor slabs. more>

$Negotiable

Category: Instruments & Meters/Testing Machines/Universal Testing Machines

Company: Chongqing Gold Mechanical&Electrical Equipment Co.,Ltd.

Product Description: Portable With Battery 1A Transformer DC Resistance Tester uses Constant current source to measure the DC resistance of inductance circuit such as power transformer oil,  current transformer oil and so on.  Portable With Battery 1A Transformer DC Resistance Tester has functions of self test, data processing, discharge rapidly, result print and so on.   Functions: A new switching power supply technology makes output current more stable and power larger than before. The tester has an advanced signal process circuit which has a good performance at anti-noise.  Test data is precise and stable. The tester has protections to prevent circuit over-current, circuit over-voltage, wrong operation, discharge and so on. Small size, light weight and more suitable for outdoor using. Varies levels of output current make measuring range more wide. Large-screen LCD makes operation easy. more>

$3.2

Category: Safety & Security/Work Protection/Safety Helmets/Hard Hats

Company: Shengli Oilfield Bangyuan Electric Co.,ltd

Product Description: Types of Fiberglass Safety Helmet Smart Safety Helmet  Product Description   Product properties   Material high strength fiberglass Colors Red, White, Yellow, Blue Cap lining material Eight-point fabric lining Standard Packing 40pcs/carton Special Features Electrical Insulation, Lateral Rigidity Size 27cm*22.2cm*14.5cm Weight 0.43kg Features High strength, high temperature resistance, good lateral performance, electrical insulation, good flame retardant effect, impact resistance, puncture resistance  Scope of application suitable for construction, railway, metallurgy, coal mining, shipbuilding, mining, petroleum, chemical and other industries           Other Color for your reference:     Packaging & Shipping   Packing: 1 Pair/ Poly bag, 20 Pairs / Carton  Weight: 0.4 Kgs/Piece Carton size:  58 X 45 X 45 CM  20'ft container: 4700 Pairs (29 CBM) 40'ft container: 9400 Pairs (58 CBM) 40'ft HQ: 11000 Pairs (68 CBM)   Certifications Company Information       FAQ Q: What is your MOQ? A: Our MOQ is 500 pairs / color, one model.   Q: Can I ask one pair samples before place order? A: We can provide free sample.   Q:How can you make sure the quantity? A:We have advanced equipment ,skilled workers, stric QC.   Q: Could you change the size for the customer? A: Yes, we do for some customer special size.   Q: What about the payment? A: We can accept L/C, T/T and Western Union and Trade Assurence.   More questions, contact us free!   more>

$$3,500 - $1,800

Category: Chemicals/Carboxylic Acid Derivatives/Esters

Company: Henan ZhengTong food technology Ltd.

Product Description: Quick Details CAS No.: 79665-93-3 Other Names: Polygelycerol Esters MF: C27H54O8 EINECS No.: NULL FEMA No.: NULL Place of Origin: Henan, China Type: Emulsifiers, Stabilizers Brand Name: ZTCC Model Number: Food Grade Product name: PGE Halal Certificated: Yes Kosher Certificated: Yes HACCP Certificated: more>

Negotiable

Category: Others

Company: Hebei Dingnuo Equipment Co., Ltd.

Product Description: API casing pipe is produced according to the API 5CT standard. It is most often used in underground construction projects to encase or protect utility lines from being damaged. It is widely used in the cementing projects to serve as the structural retainer for the wall of oil and gas wells or wellbore. It is inserted into a well bore and cemented in place to protect both subsurface formations and the wellbore from collapsing and allow drilling fluid to circulate and extraction to take place. Contact UsMore Information more>

$$930-$1110/ton

Category: Metallurgy & Minerals/Common Steel/Other Steel Products

Company: Henan Rarlong Steel Co., Ltd.

Product Description: Rarlong now has one provincial technical center with various testing and inspection equipments, more than 100 technical personnel and equipped with automated 5 precision hot rolling mills, hongyuan is specializing in steel rolling over 40 years, products are currently widely adopted in domestic China market and exporting to Europe, USA, middle east,Southeast Asia etc. 1. All shaped flat steel in the range of 12-300mm wide and 3-60mm thick can be developed and customized. 2. Professional customization industry supporting non-standard shaped steel, small steel with complex section. 3.With 40 years of experience in the design and production of section steel, the company owns unmanned electrification control production equipment, provides different production cost schemes, and meets the needs of customers for use and cost. 4. The product has good material and comprehensive performance, adopts high-pressure water descaling technology, and the appearance quality of the product is better than the industry standard. more>

$4.76

Category:

Company: Shishi City Enlightenment New Materials Co., Ltd.

Product Description: It is suitable for all kinds of products that need to drop glue more>

Negotiable

Category: Chemicals/Petrochemicals/Carbon Black

Company: Quanzhou Tengchang new material Technology Co., LTD

Product Description: Special for industrial production of carbon-9 petroleum resin more>

$询价

Category: Others

Company: Shanghai Shanglan New Energy Technology Co., Ltd.

Product Description: Product Category: Isotopes of Xenon Product Details more>

$询价

Category: Others

Company: Shanghai Shanglan New Energy Technology Co., Ltd.

Product Description: Product Category: Isotopes of SiliconProduct Details more>

Negotiable

Category: Interwoven Fabric

Company: Zhongke Yishuo (Xiamen) Quality and Technical Service Co., Ltd

Product Description: 16 CFR Part 1610 specifies in detail the definitions applicable to this standard, such as statutes, rules and regulations, standards, apparel parts, coated fabrics, plain textile fabrics, pile textile fabrics, types of finishes, etc.16 CFR 1610 Textile Clothing Testing--Test Name:16 CFR Part 1610: Standard for the Flammability of Clothing Textiles16 CFR Part 1610: Flammability Testing of Textile Clothing16 CFR 1610 Textile Clothing Testing--Product Classification:This standard classifies the flammability of apparel textiles into three levels based on test results:Level 1: Normal flammability;Level 2: Intermediate flammability;Level 3: Rapid and intense burning;16 CFR 1610 Textile Clothing Testing--Scope of Application:16 CFR 1610 applies to textile fabrics or related materials used in clothing articles in their ready-to-wear form or state, including finished garments and apparel items available for consumer use.Specific exemptions: All fabrics of the following types, or products entirely made from one or more of these fabrics, are exempt from testing requirements (draft affidavit):(1)Plain fabrics, regardless of fiber content, weighing 2.6 ounces or more per square yard.(2)All fabrics, plain and pile, regardless of weight, made entirely from any of the following fibers or entirely from combinations of the following fibers: acrylic, modacrylic, nylon, olefin, polyester, wool.16 CFR 1610 Textile Clothing Testing--Other Related Standards:NFPA 701: Standard Methods of Fire Tests for Flame Propagation of Textiles and Films16 CFR 1630: Standard for the Surface Flammability of Carpets and Rugs16 CFR 1631: Standard for the Surface Flammability of Small Carpets and RugsISO 12952-1: Textiles - Assessment of the ignitability of bedding items - Part 1: Ignition source: smoldering cigaretteISO 12952-2: Textiles - Assessment of the ignitability of bedding items - Part 2: Ignition source: match-flame equivalentISO 6941: Textile fabrics - Burning behaviour - Measurement of flame spread properties of vertically oriented specimensEN 13772: Textiles for curtains and drapes - Determination of burning rate more>

$1

Category: Chemicals/Rubber & Products/SBR (Styrene-Butadiene Rubber)

Company: Hebei Dongsheng Safety Protection Equipment Co., Ltd.

Product Description: Introduction to Insulating Rubber Mats:Insulating rubber mats, also known as insulating mats, insulating pads, insulating gaskets, or insulating blankets, are widely used in substations, power plants, distribution rooms, laboratories, and live working outdoors.Made from rubber insulating materials, the upper and lower surfaces of the insulating mat should be free from harmful irregularities. Harmful irregularities refer to features that disrupt uniformity or damage the smooth surface profile, such as small holes, cracks, local bulges, cuts, embedded conductive foreign objects, folds, voids,凹凸波纹, and casting marks. Harmless irregularities refer to surface irregularities formed during the production process.Characteristics and Application Scenarios of 15KV Insulating Rubber MatsExcellent physical and mechanical properties, with superior insulation performance, suitable for use in dry environments with high dielectric requirements between -35°C and +100°C. Tested at 43KV, it operates normally at 660V. Widely used in substations, power plants, distribution rooms, laboratories, and live working outdoors. It should be stored in a dry, ventilated environment, away from heat sources, and at least 20cm above the ground and walls. Avoid contamination by acids, alkalis, and oils, and do not store outdoors to prevent direct sunlight.Technical Parameters of Insulating Rubber Mats1. Classified by voltage resistance:★★5kv【Insulating Rubber Mat】Technical parameters: Thickness 3mm; Colors red, black, green; Specific gravity: 5.8KG/m2★★15KV【Insulating Rubber Mat】Technical parameters: Thickness 5mm; Colors red, black, green; Specific gravity: 9KG/m2 ★★20KV【Insulating Rubber Mat】Technical parameters: Thickness 6mm; Colors red, black, green; Specific gravity: 11KG/m2 ★★25KVInsulating Rubber MatTechnical parameters: Thickness 8mm; Colors red, black, green; Specific gravity: 14.5KG/m2 ★★30KVInsulating Rubber MatTechnical parameters: Thickness 10mm; Colors red, black, green; Specific gravity: 18KG/m2 ★★35KVInsulating Rubber MatTechnical parameters: Thickness 12mm; Colors red, black, green; Specific gravity: 21.6KG/m2 2. Classified by color:◆RedInsulating Rubber Mat◆BlackInsulating Rubber Mat◆GreenInsulating Rubber Mat3. Classified by thickness:●3mm, 5mm, 6mm, 8mm, 10mm, 12mmInsulating Rubber MatUsage Range and Storage MethodInsulating rubber mats are widely used in substations, power plants, distribution rooms, laboratories, and live working outdoors.They should be stored in a dry, ventilated environment, away from heat sources, and at least 20cm above the ground and walls. Avoid contamination by acids, alkalis, and oils, and do not store outdoors to prevent direct sunlight. 1. Our products are made from non-polar pure rubber with excellent insulation properties, such as NR and SBR.2. Our products do not contain inferior rubber, waste rubber, recycled rubber, or any plastic components.3. Stable surface and volume resistance, high specific gravity per unit area, good flatness, and stable physical properties.4. Our products are resistant to acids, alkalis, oils, and high temperatures, with an elegant and aesthetic color range, and power frequency withstand voltage meets national standards.Performance of Our Insulating Rubber Mats☞ No more than 5 bubbles per square meter with a diameter of 1cm², distance between any two bubbles not less than 40mm, no cracks.☞ Elongation at break ≥250%, no deformation.☞ Heat aging in air at 70°C for 72 hours.☞ Water absorption ≤1.5%.☞ Power frequency withstand voltage RMS >15KV, no breakdown for 3 seconds.☞ Smooth appearance, no unevenness, good elasticity. more>

$1

Category: Others

Company: Hebei Dongsheng Safety Protection Equipment Co., Ltd.

Product Description: The WX-(8x8) amphibious vehicle developed and manufactured by Hebei Five-Star Power Equipment Co., Ltd. combines the dual capabilities of both a car and a boat. This all-terrain amphibious flood rescue vehicle can travel on land like a car and float on water like a boat. When operating on land, it can carry 4 to 6 people at speeds of 40-55 km/h. On water, it can reach speeds of 5-12 km/h. During disasters that disrupt transportation, the WX-(8x8) amphibious vehicle can navigate through streets and alleys, providing emergency firefighting, disaster relief, and material transport. It offers high-efficiency handling and top-tier extreme terrain performance while carrying all necessary equipment for emergency and fire rescue operations. Optional rubber tracks provide optimal traction on soft ground or snow. It enables rapid deployment for flood control, emergency response, disaster relief, and firefighting, overcoming various terrains to transport personnel and equipment to and from disaster sites.The notable feature of the WX-(8x8) amphibious vehicle developed by Hebei Five-Star Power Equipment Co., Ltd. is its excellent performance in extremely harsh conditions and superior water-crossing capability. When deployed in rescue operations, fire scenes, or patrol and reconnaissance missions, it offers substantial load and towing capacity. Tracks used on soft terrain, desert, or snow provide enhanced traction.I. Unique Advantages of the WX-(8x8) Amphibious Vehicle Developed by Hebei Five-Star Power Equipment Co., Ltd.:(1) Powered by a 4-stroke OHV V-Twin air-cooled 747cc, 23 horsepower (16 kW) electronic fuel injection engine.(2) Equipped with an efficient BSWB safety start device to prevent operational errors.(3) The vehicle features an LCOF high-protection design to ensure occupant safety. Standard configurations include: 1) front bumper, 2) automatic drainage, 3) hull bottom guard plate, 4) imperial hex key set, 5) USB port, 6) 12V power interface.(4) The WX-(8x8) amphibious vehicle’s HE-based control system must be equipped with a complete set of SOTA lightweight and flexible simulation operating devices. It supports DM operation for improved efficiency and flexibility.(5) The OBD "6+1" engine fault self-diagnosis system enhances operational safety. The engine key must be turned to the first position three times consecutively and returned; the integrated dashboard will flash six times, pause for one second, then flash once to complete engine inspection, indicating normal operation.(6) Vehicle components adopt a TS sealed design to ensure long-term safety performance.(7) The transmission uses a PANETARY differential speed system, featuring compact structure, high transmission efficiency, low inter-tooth load, high structural rigidity, and ease of power shifting.II. Performance of the WX-(8x8) Amphibious Vehicle Developed by Hebei Five-Star Power Equipment Co., Ltd.:• Land load capacity: 454 kg; water load capacity: 431 kg; land passenger capacity: 6 people; water passenger capacity: 4 people; towing capacity: 635 kg.• Eight-wheel (six-wheel) drive and LCOF high-protection design ensure occupant safety and provide additional vehicle stability.• Optional high-torque transmission for extreme terrains: high speed, low speed, forward, and reverse.• The HE-based vehicle control system must include a complete set of SOTA lightweight and flexible simulation operating devices. Supports DM operation.• Electronic fuel injection provides:Ø (1) Fuel economyØ (2) Reliable cold-weather startingØ (3) Enhanced high-altitude performanceØ (4) OBD "6+1" engine fault self-diagnosis system for operational safety• Compact body design improves mobility in harsh terrains.• Large rear cargo capacity; front bearing extendable.• TS triple-sealed design ensures long-term safety of vehicle components; full impact protection plate (optional).• Uses 24-inch (609 mm) ARGO tires with patented tread design.• Equipped with electronic fuel injection ignition start system.• LCD integrated digital dashboard (includes OBD "6+1" engine fault self-diagnosis system, speedometer, tachometer, odometer, voltmeter, hour meter, engine coolant temperature, low oil pressure indicator, handbrake warning light, etc.); self-adjusting disc hydraulic brake; low emissions.III. Technical Configuration Parameters of the WX-(8x8) Amphibious Vehicle Developed by Hebei Five-Star Power Equipment Co., Ltd.:Configuration8x8 ModelEngineKohler (USA) 4-stroke OHV V-Twin air-cooled electronic fuel injection engine.Horsepower/Displacement/Operating Time23/747cc/8-10 hoursTypeKohler (USA) 4-stroke OHV V-Twin air-cooled electronic fuel injection, electronic ignitionCooling/Start/BrakeAir-cooled/Electric/HydraulicOperationJoystick mounted on dashboard; HE-based vehicle control system requires complete SOTA lightweight and flexible simulation operating devices. Supports DM operation for efficiency and flexibility; BSWF safety start device prevents operational errors.ControllerRight-hand speed control throttle grip; light switch; ignition switch.ClutchBelt drive; SSC continuously variable transmission (CVT) maximizes engine power transmission.Transmission/Drive SystemPANETARY differential speed system with compact structure, high transmission efficiency, low inter-tooth load, high structural rigidity, and ease of power shifting / Roller chain drive with machined sprockets, spline-connected to axle; components feature TS triple-sealed design for long-term safety.FrameFormed channel steel structure; high-strength and durable welding; polyester powder coating for lasting protection.Body/Bottom Guard PlateVacuum-formed high molecular weight polyethylene / OptionalLoad Capacity - Land454 kgLoad Capacity - Water408 kgTowing Capacity635 kgFuel Capacity27 liters; visible polyethylene fuel tankPassenger Capacity6 on land; 4 on waterSpeed - Land19 mph (30 km/h)Speed - Water3 mph (5 km/h); with external engine: 10-12 km/hBearing ExtensionFront - Standard / Rear - OptionalTiresARGO AT189 24x10.00-8NHSGround Pressure1.7 psi (13.5 kPa tires); 0.67 psi (4.6 kPa tracks)Ground Clearance - Tires230 mmGround Clearance - Tracks255 mmShipping Weight476 kgShipping Dimensions3020*1473*1180 mm (L x W x H)Operating ConditionsAll-weather, all-terrain, -40℃ to +40℃ more>

$1

Category: Others

Company: Hebei Dongsheng Safety Protection Equipment Co., Ltd.

Product Description: The WX-(8x8) amphibious vehicle developed and manufactured by Hebei Five-Star Power Equipment Co., Ltd. combines the dual performance of a vehicle and a boat. This all-terrain amphibious flood rescue vehicle can travel on land like a car and float on water like a boat. When operating on land, it can carry 4-6 people at a speed of 40-55 km/h. On water, it can reach a speed of 5-12 km/h. In the event of traffic disruptions caused by disasters, the WX-(8x8) amphibious vehicle can navigate through streets and alleys, providing emergency firefighting, disaster relief, and material transportation services. It offers high-efficiency handling capabilities and top-tier extreme terrain performance while carrying or transporting all necessary equipment for emergency and fire rescue operations. The optional rubber tracks provide optimal traction on soft terrain or snow. It can be quickly deployed for flood control, emergency rescue, disaster relief, and firefighting, overcoming various terrains to transport personnel and equipment to and from disaster sites.The WX-(8x8) amphibious vehicle developed and manufactured by Hebei Five-Star Power Equipment Co., Ltd. excels in extremely harsh ground conditions and demonstrates excellent water-crossing capabilities. When deployed for rescue operations, fire scenes, or patrol and reconnaissance, it offers significant load-bearing and towing capacities. The tracks are designed for soft terrain, desert, or snow, providing superior traction.I. Unique Advantages of the WX-(8x8) Amphibious Vehicle:(1) Powered by a 4-stroke OHV V-Twin air-cooled 747cc, 23 horsepower (16 kW) electronic fuel injection engine.(2) Equipped with an efficient BSWB safety start device to prevent operational errors.(3) The vehicle features an LCOF high-protection design to ensure passenger safety. Standard configurations include: 1) front bumper, 2) automatic drainage, 3) hull bottom guard plate, 4) imperial hexagon socket set, 5) USB port, 6) 12V power interface.(4) The vehicle's control system, based on HE, requires a complete set of SOTA lightweight and flexible simulation operating devices. It supports DM operation for enhanced efficiency and flexibility.(5) The OBD "6+1" engine fault self-diagnosis system ensures operational safety. The engine key must be turned to the first position three times consecutively and returned. The integrated dashboard flashes six times, pauses for one second, and flashes once more to complete the engine check, indicating normal engine operation.(6) Vehicle components adopt a TS sealed design to ensure long-term safety performance.(7) The transmission uses a PANETARY differential speed change system, featuring compact structure, high transmission efficiency, low inter-tooth load, high structural rigidity, and ease of power shifting.II. Performance of the WX-(8x8) Amphibious Vehicle:• Land load capacity: 454 kg; water load capacity: 431 kg; land passenger capacity: 6 people; water passenger capacity: 4 people; towing capacity: 635 kg.• Eight-wheel (six-wheel) drive and LCOF high-protection design ensure passenger safety and provide additional vehicle stability.• Optional high-torque transmission for extreme terrains, with high speed, low speed, forward, and reverse gears.• The vehicle's control system, based on HE, requires a complete set of SOTA lightweight and flexible simulation operating devices. It supports DM operation.• The electronic fuel injection system provides:Ø (1) Fuel economyØ (2) Reliable cold-weather startingØ (3) Improved high-altitude performanceØ (4) OBD "6+1" engine fault self-diagnosis system for operational safety• Compact body design enhances maneuverability in harsh terrains.• Large rear cargo capacity with extendable front bearings.• TS triple-sealed design ensures long-term safety of vehicle components. Optional full impact protection plate.• 24-inch (609 mm) ARGO tires with patented tread design.• Electronic fuel injection ignition start device.• LCD integrated digital dashboard (includes OBD "6+1" engine fault self-diagnosis system, speedometer, tachometer, odometer, voltmeter, timer, engine coolant temperature, low oil pressure indicator, handbrake warning light, etc.), self-adjusting disc hydraulic brakes, low emissions.III. Technical Configuration Parameters of the WX-(8x8) Amphibious Vehicle:Configuration8x8 ModelEngineKohler (USA) 4-stroke OHV V-Twin air-cooled electronic fuel injection engine.Horsepower/Displacement/Operating Time23/747cc/8-10 hoursTypeKohler (USA) 4-stroke OHV V-Twin air-cooled electronic fuel injection, electronic ignitionCooling/Start/BrakeAir-cooled/Electric/HydraulicOperationJoystick mounted on dashboard. Based on HE vehicle control system, requires a complete set of SOTA lightweight and flexible simulation operating devices. Supports DM operation for efficiency and flexibility. BSWF safety start device prevents operational errors.ControllerRight-hand speed control throttle. Light switch, ignition switch.ClutchBelt-driven, SSC continuously variable transmission (CVT) to maximize engine transmission power.Transmission/Drive SystemPANETARY differential speed change system, featuring compact structure, high transmission efficiency, low inter-tooth load, high structural rigidity, and ease of power shifting. Roller chain drive with machined sprockets, spline-connected to axle. Components feature TS triple-sealed design for long-term safety.FrameFormed channel steel structure, high-strength and durable welding, polyester powder coating for long-lasting protection.Body/Hull Bottom Guard PlateVacuum-formed high molecular weight polyethylene/OptionalLoad Capacity - Land454 kgLoad Capacity - Water408 kgTowing Capacity635 kgFuel Capacity27 liters, visible polyethylene fuel tankPassenger Capacity6 on land, 4 on waterSpeed - Land19 mph (30 km/h)Speed - Water3 mph (5 km/h), up to 10-12 km/h with additional outboard engineBearing ExtensionFront - Standard / Rear - OptionalTiresARGO AT189 24x10.00-8NHSGround Pressure1.7 psi (13.5 kPa tires); 0.67 psi (4.6 kPa tracks)Ground Clearance - Tires230 mmGround Clearance - Tracks255 mmTransport Weight476 kgTransport Dimensions3020*1473*1180 mm (L x W x H)Operating ConditionsAll-weather, all-terrain, -40°C to +40°C more>