$16.5

Category: Chemicals/Paints & Coatings/Marine Coatings

Company: 山东玖锌特种涂料有限公司

Product Description: Composition:Acrylic metallic silver paint is a high-quality architectural coating formulated with acrylic resin, copper powder, and other pigments. It is a resin-based oil paint.Main Characteristics:◆ Dries at room temperature, with excellent weather resistance and good adhesion, resistant to chemical changes.◆ Diverse coating colors, high gloss, strong decorative effect, enhances the appearance and overall texture of the workpiece after application.◆ Fast drying time, good water and oil resistance.◆ Easy application: This paint is a single-component product, requiring no hardener, making application more convenient with no cross-linking or curing restrictions.◆ Excellent mechanical properties of the paint film: wear-resistant, high hardness, strong impact resistance, meeting product standards.Applications:◆ Acrylic metallic paint is mainly used for surface coating on various aluminum alloys, engineering machinery, agricultural machinery, machine tools, equipment, steel structures, instruments, etc., providing excellent aesthetic and decorative effects.Color and Appearance:◆ Various colors, normal paint film appearance.Basic Parameters:Specific Gravity:Approx. 1.2 kg/L (after mixing)Dry Film Thickness:Approx. 50 μmTheoretical Consumption:Approx. 200 g/m² (based on 50 μm dry film, excluding loss)Flash Point:Approx. 29°CDrying Time:Surface dry ≤ 2h, hard dry ≤ 8h◆ Drying Time:◆ Recoating IntervalSubstrate Temperature0°C25°C35°CMinimum24h8h6hMaximumUnlimitedUnlimitedUnlimitedTechnical Parameters:Condition in Container:Stirs to uniform consistency without hard particlesDrying Time:Surface dry ≤ 2h, hard dry ≤ 24hImpact Resistance:≥ 50 cmBending Resistance:≤ 2 mmPencil Hardness:2HAdhesion:Grade 1Hiding Power:≥ 0.90Acid Resistance:No abnormality in paint film after 48hAlkali Resistance:No abnormality in paint film after 48hSalt Water Resistance:No abnormality in paint film after 168hRecommended Systems:◆ Epoxy zinc-rich primer, epoxy iron red primer, polyurethane iron red primer, epoxy sealer, etc.Surface Preparation:◆ Surfaces without primer must be dry.◆ Remove all oil, dirt, and ensure no accumulation of acid, alkali, salt, or moisture.Application Conditions:◆ Substrate temperature must be above 3°C, relative humidity below 85%.◆ Application temperature: 5°C to 40°C◆ Stir thoroughly using power tools or manual tools.Application Methods:Application MethodNozzle SizeSpray PressureThinning RatioAirless Spray0.4mm-0.5mm20MPa-25MPa (200kg/cm²-250kg/cm²)0-5%Air Spray1.5mm-2.0mm0.3MPa-0.4MPa (3kg/cm²-4kg/cm²)10%-15%Roller--5%-10%ThinnerAcrylic series专用 thinnerAcrylic series专用 thinnerAcrylic series专用 thinnerNotes:Statement 1. Although the above data are based on tests and accumulated experience and can serve as a reference for application, most parameters in practical applications depend on factors such as film thickness, application environment (ventilation, temperature, humidity, etc.), underlying coatings/overall system, etc.2. This product is only suitable for professional use. For applications not specified or under conditions unknown to us, we only guarantee the quality of the paint itself.3. This manual has been updated and improved based on our recent accumulation and summary in construction practice. This version replaces all previous versions.4. We will continue to summarize, update, and improve in future construction practices. We sincerely welcome valuable feedback from both new and existing users during use. For the latest manual, please contact us promptly by phone or mail. Thank you for your cooperation!Recoating Interval: Recoating interval: 1 hour for recoating with the same product, 2-8 hours for other paints. Avoid moisture before the coating is fully dry. more>

$1500

Category: Chemicals/Chemical Intermediates/Intermediate Compounds

Company: 青岛宏鑫辉集成房屋开发有限公司

Product Description: Light Steel Integrated Villa Houses, Earthquake and Wind Resistant, Quick ConstructionLight Steel Integrated Houses: This refers to light steel prefabricated integrated houses, whose main material is light steel龙骨 (longlong) produced by specialized equipment from hot-dip aluminum-zinc steel strips. Through precise computer calculations and the support and combination of auxiliary components, they achieve load-bearing capacity to replace traditional houses. Combined with the high efficiency brought by industrial production, the construction period is shortened by 2/3 compared to traditional buildings. Their excellent performance determines ultra-high cost-effectiveness in comprehensive comparisons.Light steel houses of different grades can be widely used in civil and public buildings, such as: new rural construction, private villas, schools, apartments, resettlement housing, vacation homes, camp houses, nursing homes, kindergartens, hospitals, office buildings, hotels, inns, camp houses, etc. more>

$1100

Category: Safety & Security/Fire Protection Equipment/Other Fire Protection Equipment

Company: 章丘金安盾消防科技有限公司

Product Description: PZ150-1.5 调压型快速开关自泄式防冻消防炮座 本公司是生产销售消防设备，消防设施消防器材的厂家。主要经销产品有：消防水炮，泡沫炮，电控消防水炮,SP40AZK全装型消防炮，SP60AZK防冻型消防炮，移动式消防炮，防撞调压型消火栓，快速调压型 消火栓，压力式泡沫比例混合装置，移动式泡沫灭火装置，空气泡沫产生器，MPS泡沫消火栓等"PZK快开调压防冻防撞型加高炮座本产品是石化企业首选消防产品。名称 快速开关自泄式消防炮座型号规格 ZPZ100-1.6 ZPZ150-1.6公称通径（mm） 100 150公称压力（Mpa） 1.6 1.6出水口法兰规格 DN65/DN80/DN100配对法兰 DN100，PN1.6MPa DN150，PN1.6MPa配对法兰标准 GB9119-2000、JB/T81-94、HG20592-97高度范围（m） 高度根据设计需要或现场冰冻层的深度确定配专用扳手 FB100 FB150适用介质 消防水或消防泡沫液快速开关自泄式消防炮座生产企业 防冻防撞直流喷雾消防水炮炮座定做加工 1,开关迅速。仅使扳手旋转4/5周即可完全关闭和开启。2 ,调压功能。因消防水的压力作用而使内部的减压装置分段开启，先一部分水通过减压装置向上走，在开启一段时间后再开启另一段，从而达到了减压效果。3, 防冻功能。不锈钢自动排水阀安装于冻土层以下（根据使用区域不同的冻土层深度，自动排水阀的埋深深度也相应改变），消火栓在关闭状态时可自动排除腔内余水，防止设备冻坏。同时还节省了普通消火栓管道前的闸阀井和闸阀的设置，既节约了投资，又节省了后期维护费用。PZ150-1.5 调压型快速开关自泄式防冻消防炮座 我厂生产消防类产品20年，地上、地下消防栓类产品近10年达到了高质量、高标准，质量可靠，凡是出厂的消防栓成品都可通过质量检验！！欢迎各界朋友莅临本公司参观、指导和业务洽谈。慧眼识珠！欢迎惠顾！ more>

$1100

Category: Safety & Security/Fire Protection Equipment/Other Fire Protection Equipment

Company: 章丘金安盾消防科技有限公司

Product Description: SSFT100/65-1.6 Quick-Opening Pressure-Regulating Anti-Collision Anti-Freeze Above-Ground Fire Hydrant Fire Hydrant and Fire Monitor Manufacturer Quality Assurance Complete Inspection Reports Full Range of Models Low Prices Technical Parameters Comprehensive ImagesOur company's fire hydrants feature the following characteristics:1. Easy Opening Function: Quick operation, using a wrench to rotate 4/5 turns for instant full closure and opening. Ordinary fire hydrants are laborious to open, avoiding tension and confusion during fire emergencies, which could delay rescue efforts. This wins precious time for firefighting.2. Pressure Reduction, Stabilization, and Regulation Function: Our fire hydrants utilize water pressure to activate an internal pressure reduction and regulation device, which opens in stages. A portion of the water first passes through the pressure reduction device upward, opening sequentially to achieve pressure reduction, stabilization, and regulation. An anti-theft water feature can be added per customer requirements to ensure user property safety.SSFT100/65-1.6 Quick-Opening Pressure-Regulating Anti-Collision Anti-Freeze Above-Ground Fire Hydrant Main Components:1. Self-Draining Valve: Automatically seals and drains based on the water pressure inside the hydrant body. When the hydrant is in normal use (fully open) with water pressure not less than 0.1MPa, the device automatically seals. After the hydrant is closed, the self-draining valve opens to discharge residual water from the body.2. Anti-Collision Breakaway Flange: A device that allows the hydrant body to completely detach from the anti-collision breakaway flange upon impact, with no damage to the body or valve. This effectively protects the hydrant, reducing economic losses from collisions.3. Water Pressure Regulator: Achieves precise pressure regulation by controlling the opening height of the regulating valve, which corresponds to different water discharge cross-sectional areas. When the hydrant inlet pressure is 1.2MPa, the outlet pressure can be adjusted between 0.3MPa and 1.0MPa.Our company is a manufacturer specializing in the production and sales of firefighting equipment, fire protection facilities, and firefighting devices.Main products include: Fire monitors, foam monitors, electrically controlled fire monitors, SP40AZK fully-equipped fire monitors, SP60AZK anti-freeze fire monitors, portable fire monitors, anti-collision pressure-regulating fire hydrants, quick pressure-regulating fire hydrants, pressure-type foam proportioning systems, portable foam fire extinguishing devices, air foam generators, MPS foam fire hydrants, etc.With 20 years of experience in producing firefighting products, our above-ground and underground fire hydrants have achieved high quality and reliability over the past decade. All finished fire hydrants leaving our factory pass quality inspections!! We welcome friends from all sectors to visit our company for tours, guidance, and business discussions. Discerning eyes recognize quality! Your patronage is welcome! more>

$1100

Category: Safety & Security/Fire Protection Equipment/Other Fire Protection Equipment

Company: 章丘金安盾消防科技有限公司

Product Description: SSP Type Quick-Opening Pressure-Regulating Anti-Collision Outdoor Above-Ground Foam Fire Hydrant Fire Hydrant and Fire Monitor Manufacturer | Quality Assurance | Complete Test Reports | Full Range of Models | Low Prices | Technical Parameters | Comprehensive Image GalleryFeatures of the Foam Fire Hydrant: Quick-opening, lightweight, featuring innovative creative improvements and enhancements based on traditional fire hydrants. It uses a lower valve plate for sealing, leveraging the medium's own pressure for sealing—the higher the pressure, the better the seal. Particularly suitable for foam firefighting lines, it includes a well-designed lubrication chamber: key components are made of highly corrosion-resistant materials and remain immersed in an oil bath for continuous lubrication. It remains functional even after long periods of disuse without maintenance. The foam mixture switch employs a stainless steel ball valve, ensuring smooth operation.SSP Type Quick-Opening Pressure-Regulating Anti-Collision Outdoor Above-Ground Foam Fire Hydrant The foam fire hydrant has two 65MM outlets for connecting fire hoses to discharge air-foam mixture. When using a mobile air-foam monitor for firefighting, both outlets can be connected simultaneously. If using only one outlet with an air-foam gun, the other outlet should be closed to prevent leakage and maintain fluid pressure. Before use, ensure hoses and discharge equipment are properly connected before opening the outlet valve. Pay attention to the valve's opening and closing directions.Our company is a manufacturer specializing in the production and sales of firefighting equipment, fire protection facilities, and firefighting devices.Main products include: Fire water monitors, foam monitors, electrically controlled fire water monitors, SP40AZK fully-equipped fire monitors, SP60AZK freeze-resistant fire monitors, mobile fire monitors, anti-collision pressure-regulating fire hydrants, quick pressure-regulating fire hydrants, pressure foam proportioning systems, mobile foam fire extinguishing devices, air foam generators, MPS foam fire hydrants, and more.With 20 years of experience in producing firefighting products, our above-ground and underground fire hydrants have achieved high quality and reliability over the past decade. Every finished fire hydrant undergoes strict quality inspection!! We welcome friends from all sectors to visit our company for guidance, tours, and business discussions. Recognize quality—welcome your patronage! more>

$800

Category: Safety & Security/Fire Protection Equipment/Other Fire Protection Equipment

Company: 章丘金安盾消防科技有限公司

Product Description: Quick Switch Self-Draining Anti-Freeze Anti-Collision Fire Monitor PS10/50W-D  Fire Hydrant and Fire Monitor Manufacturer  Inspection Report Full Range of Models Low Price Technical Parameters Complete Picture CollectionOur company sells the PS20; PS30; PS40; PS50; PS60; PS70; PS80; PS90; PS100W; PS120 fire monitor series products, which are on-site manually operated water spraying equipment. They adopt a single inlet dual flow channel converging design, reducing the pressure loss at the inlet and outlet of the fire monitor, providing a longer range compared to ordinary fire monitors. Manufactured using gravity non-ferrous metal casting technology, the castings have smooth inner walls, reducing water flow resistance and improving efficiency. The monitor body is made of stainless steel or corrosion-resistant aluminum alloy, and can be custom manufactured according to customer requirements, enhancing the anti-corrosion capability and working strength of the fire monitor, and extending its service life.Quick Switch Self-Draining Anti-Freeze Anti-Collision Fire Monitor PS10/50W-D   The fire monitors produced by our company feature a compact design, small size, and light weight, ensuring reliable positioning and flexible operation. They comply with the national standard (GB19156-2003), "General Technical Conditions for Fire Monitors." With low inlet pressure, they are equipped with adjustable flow nozzles and automatic flow nozzles, capable of direct jet fire suppression or spray cooling to meet different fire extinguishing needs. The monitor body can perform horizontal rotation, pitch movement, and reliable positioning and locking, facilitating firefighters' safe withdrawal from hazardous environments and protecting their personal safety. Suitable for extinguishing general solid material fires, they can be installed in industrial and mining enterprises, warehouses, oil fields, storage tanks, fire trucks, fireboats, oil terminals, etc.Our company is a manufacturer engaged in the production and sales of firefighting equipment, fire protection facilities, and firefighting器材.Main products include: fire water monitors, foam monitors, electrically controlled fire water monitors, SP40AZK fully equipped fire monitors, SP60AZK anti-freeze fire monitors, mobile fire monitors, anti-collision pressure-regulating fire hydrants, quick pressure-regulating fire hydrants, pressure foam proportioning devices, mobile foam fire extinguishing devices, air foam generators, MPS foam fire hydrants, etc."Our factory has been producing firefighting products for 20 years, with above-ground and underground fire hydrant products achieving high quality and high standards for nearly 10 years. All finished fire hydrants leaving the factory pass quality inspection!! Friends from all walks of life are welcome to visit our company for guidance and business negotiations. Discerning eyes recognize quality! Welcome your patronage! more>

$0.27

Category: Hardware & Tools/Fasteners & Connectors/Other Fasteners & Connectors

Company: 深圳市孟京科技有限公司

Product Description: Shenzhen Mengjing Technology Co., Ltd. Contact: Ms. Chen Phone: 13421366133 Main products: LED patch terminals, SMT connectors, SMD terminals, lighting parallel terminals, PCB plug-in terminals, bidirectional connector terminals, wiring connectors 2PIN quick wiring terminal 2060 press-type patch terminal, suitable for wire diameter 24-18AWG, pitch 4.0mm more>

Negotiable

Category: Chemicals/Adhesives & Sealants/Inorganic Adhesives

Company: 深圳市泰顺胶粘剂有限公司

Product Description: 1. Purpose and Function: Primarily used to dissolve cured instant adhesive. Additionally, it can remove whitening traces left by glue. 2. Usage Instructions: First, clean the surface thoroughly. Apply an appropriate amount of debonder onto the cured adhesive, ensuring complete coverage. The required time depends on the area and thickness. Once softened, scrape it off with a suitable tool. For thicker layers, repeat the process multiple times if necessary. 3. Applicable to industries such as plastics, hardware, wood, electronics, and electrical appliances. 5 more>

$5

Category: Construction & Building Materials/Cement/Cement & Cementitious Materials

Company: 中大恒建北京新材料科技有限公司

Product Description: Zhongda Hengjian Airport Pavement Pothole Rapid Repair Material is a high-tech product developed by Zhongda Hengjian in collaboration with national research institutions specifically for the rapid repair of airport concrete pavements. This product professionally treats surface defects in airport system cement pavements such as potholes, cracks, edge spalling, and broken corners. After repair, the color is aesthetically pleasing, the system is highly stable, and its waterproof and frost-resistant qualities are renowned in the industry.Airport Pavement Pothole Rapid Repair Material is formulated using high-strength washed and dried sand as aggregate, special cement as a binder, and supplemented with high fluidity, micro-expansion, and anti-segregation agents. During construction, a certain amount of water is added, and after thorough mixing, it is ready for use. This material features excellent fluidity, no shrinkage, early high strength, strong impact resistance, high bonding strength, self-compacting properties, and strong weather resistance. The product's comprehensive performance is superior, meeting the construction needs of various airports, making it an ideal material for emergency repairs and rapid maintenance of airport runways, aprons, and support areas. For construction parties, it offers advantages such as reliable quality, cost reduction, shortened construction periods, and ease of use.Core Advantages:1. High Bonding Strength: Up to 4 times that of the original concrete, ensuring no hollowing or cracking after repair;2. High Strength: Final strength can reach above C65;3. High Toughness: Impact resistance is more than 20 times that of ordinary concrete;4. Frost Resistance: The core technical material has extremely low water absorption and can withstand low-temperature freeze-thaw cycles below -40°C without hollowing or peeling;5. Resistance to Salt Corrosion: Particularly resistant to corrosion from deicing agents.6. Consistent Thermal Expansion and Contraction Coefficient: Ensures synchronous displacement with the original concrete during thermal cycles, preventing weak bonding or peeling due to inconsistent coefficients.7. Fast Curing: Only 2 hours of curing required after construction before the pavement is ready for traffic. more>

$1

Category: Construction & Building Materials/Cement/Cement & Cementitious Materials

Company: 中大恒建北京新材料科技有限公司

Product Description: With the development of the aviation industry, the total mass and tire pressure of civil aircraft are continuously increasing, thus imposing higher demands on airport pavements. Not only is sufficient load-bearing capacity required (i.e., meeting strength requirements), but the pavement must also possess good usability quality. This means that while the pavement should be smooth, it must also have a certain roughness to ensure stable and comfortable taxiing, easy braking, and to prevent hydroplaning on wet surfaces or during rainy conditions, thereby ensuring aircraft safety. I. Excavation and Replacement of Cement Concrete Slabs 1. For severely damaged sections of cement concrete slabs where the thickness is less than 15 cm, the damaged slabs should be excavated and replaced. Use C30 concrete to replace the excavated damaged slabs. The damaged sections of the base layer should be removed, and the roadbase should be reinforced with C15 concrete. The top surface elevation of the reinforced concrete should be level with the existing base layer. 2. ① When removing old slabs, care should be taken to minimize impact on adjacent slabs, and existing tie bars should be preserved as much as possible. Use hydraulic breakers to remove broken concrete, and promptly clear away concrete debris. ② Remove damaged sections of the base layer and compact the base. For individual slab bases, reinforce the roadbase with C15 concrete, ensuring the top surface elevation matches that of the existing base layer. Apply a 20 cm wide asphalt strip on the base layer at the joints of the concrete slabs. ③ Replace the excavated damaged slabs with C30 concrete. Use commercial concrete delivered to the site via specialized concrete transport vehicles. Compact with insert vibrators, level with a vibrating beam, and finish manually. Treat the concrete surface to match the existing pavement texture. If the original slab contained reinforcement mesh, the new slab should also include it, and tie bars to adjacent slabs should be restored. Use curing compounds for curing. Cut joints in adjacent slabs to a depth of 1/4 of the slab thickness using a joint cutter. Remove debris from the joints and fill with joint sealant. ④ Excavation and replacement refer to the damaged slabs on the old road that require removal. Specific repair locations are detailed in the "Yanhuang Road Pavement Excavation and Repair Quantity Table." II. Repair and Treatment of Original Cement Concrete Slabs 1. Joint Treatment ① For fine cracks less than 3 mm wide, use expansion grouting: first widen the crack into a 1.5–2.0 cm groove, with a maximum depth not exceeding 2/3 of the slab thickness. Remove concrete debris, fill with clean stone chips, then inject joint sealant. Open to traffic only after the material has cured and reached strength. ② For medium cracks between 3 mm and 15 mm wide, use strip overlay for repair. When cutting on both sides of the crack, ensure the cuts are parallel to the contraction joints and at least 15 cm from the crack. Remove concrete, install dowel bars, roughen the inner walls of the crack, remove debris and surface dust, and exposed aggregate. Finally, pour concrete. ③ For severe cracks wider than 15 mm, use full-depth repair (aggregate interlock method). Make parallel cuts, remove broken concrete, reinforce the base layer, then pour cement concrete. Open to traffic only after strength is achieved. 2. Edge and Corner Repair ① For broken corners, determine the cutting range based on the size of the fractured surface. The minimum longitudinal cutting width is 0.5 m, and the maximum is 1.0 m; the minimum transverse width is 0.5 m, extending to the center of the lane. Carefully cut the damaged slab to avoid additional damage to adjacent slabs. After cutting, remove the damaged section to form a regular vertical surface. Existing reinforcement should not be cut; if it is difficult to preserve all reinforcement, at least retain 20–30 cm of rebar ends, staggered in length. If the base layer is loose, excavate and replace with C15 concrete as the base. ② Slab repair: For spalling at the edges of cement concrete panels, clean the spalled surface and repair with asphalt mixture or joint material. ③ Corner repair: For broken corners, determine the cutting range based on the size of the fractured surface. Ensure vertical cuts, apply asphalt to the joint surface with the existing slab, and if it is an expansion joint, install a joint filler. Then pour cement concrete and open to traffic after strength is achieved. ④ Damaged joint sealant repair: Remove old sealant and debris before repairing the joint. ⑤ Longitudinal joint opening repair: When transverse displacement of adjacent lane panels causes longitudinal joint openings less than 10 mm, use heated-applied sealants such as PVC mastic, tar-based sealants, or rubber asphalt. For openings between 10–15 mm, use polyurethane cold-applied sealants. For openings larger than 15 mm, use asphalt sand for filling. ⑥ Longitudinal joint破碎 repair: Cut a planned shape around the破碎 area outer edge, with vertical cut surfaces and a flat base. Remove concrete debris before filling and repair. 3. Treatment of Faulting in Cement Concrete Slabs After grouting and crack treatment are completed, address slab faulting. For faulting ≤ 0.10 mm, use mechanical grinding or manual chiseling to level. For faulting > 0.10 mm, first level by chiseling, then overlay with a leveling course, or partially excavate and reconstruct (depending on site conditions). 4. Treatment of Potholes in Original Cement Concrete Slabs For individual potholes, remove debris and fill with materials like cement mortar to achieve a smooth and dense surface. For multiple connected potholes, use thin-layer repair: cut potholes to a depth of at least 6 cm, compact thoroughly, and ensure level with the original concrete panel. 5. Treatment of Joints in Original Cement Concrete Slabs Joints in concrete pavement include longitudinal construction joints, longitudinal contraction joints, transverse construction joints, and transverse expansion joints. Joints are most prone to damage, and many joints in this project area have damaged or unsealed filler. First, clean the joints with a blower or vacuum to remove dust, then fill with joint sealant. Use polyurethane sealant as the joint filler for injection. more>

$26

Category: Chemicals/Chemical Intermediates/Intermediate Compounds

Company: 直尚化工(上海)有限公司

Product Description: Grade: 626-60Type: Hydroxy Acrylic ResinApplication: Automotive Refinish Paint, Ultra-Fast Drying PUFeatures: Ultra-fast drying, high hardness, curable at room temperature, quick sandingTechnical SpecificationsItem Parameter IndexAppearance Transparent viscous liquidColor ≤1OH% (Curing method) 2.6Non-volatile content (%) 60±1Viscosity V-ZPH value 6-13 more>

$200

Category: Chemicals/Paints & Coatings/Fire-Resistant Coatings

Company: 赛默新材料（深圳）有限公司

Product Description: AC-46-1Product InformationSYNTHITE AC-46-1/60 mPa-S is an excellent fast-curing, air-drying polyurethane conformal coating that is resistant to high temperatures, moisture, and fungi, suitable for the conformal coating requirements of all electronic and electrical components.Application AreasIt is an excellent conformal coating for various types of electronic and electrical components.· Excitation coils· Collector rings· Ceramics· Control coils· Fuse tubes· Solder joints· Motor bases· Solenoid coils· Stators· Switch insulating plates· Controller shafts· Transformers· Bakelite· Printed circuit boards· Busbars· Electronic connectors· Rectifier joints· Junction boxesProduct Advantages· Fungus resistance· Fast curing; components can dry within 30 minutes for subsequent operations· Multiple application methods (dip impregnation, brushing, or spraying, etc.)· Temperature resistance up to 155°C· Excellent chemical resistance· Oil and moisture resistance· Excellent coating for electronic circuit boards· Excellent abrasion resistance· Good flexibility· UV indicator· Excellent adhesion· Suitable for conformal coating of all types of electronic and electrical components· Military approval V-173-C-2Application ProcessSYNTHITE AC-46-1/60 mPa-S can be applied using dipping, brushing, or spraying processes.It can be used directly or diluted with thinner T-100 as required.For spraying processes, the recommended dilution ratio is typically 20-25%.During application, it is advised that the film thickness does not exceed 0.0381 mm to ensure thorough solvent release and complete curing.Since SYNTHITE AC-46-1/60 mPa-S is an air-drying product, it can cure within 60 minutes for subsequent handling. For optimal chemical and abrasion resistance, it is recommended to air dry for at least 24 hours.If using the product via spraying, ensure the spraying area is clean: filters and waste generated on-site should be wetted with water and placed in a safe container for disposal.PackagingCurrently available in 10 kg packaging for use.Health and SafetyOur products are intended for professional/industrial use only. For more information, please refer to the Material Safety Data Sheet (MSDS).Storage & LifespanUnopened drum products have a shelf life of 12 months when stored below 21°C. Spray packaging products have a shelf life of 12 months below 21°C. Specific requirements are as follows:· Store below 21°C. Keep away from direct sunlight, heat sources, and open flames. more>

$22

Category: Electrical Equipment & Supplies/Low Voltage Electrical/Other Low Voltage Electrical

Company: 上海市科迎法电气科技有限公司

Product Description: Shanghai Keyingfa Electric Technology Co., Ltd., after ten years of dedicated effort, has achieved mass production of M12 threaded interface connectors and sockets, as well as M8 connectors and sockets. The company has innovatively developed high-temperature resistant and highly sealed socket products. Through scientific design and the selection of high-quality raw materials, the products offer high reliability, addressing urgent user needs and earning customer acclaim. With stable quality and significant production capacity advantages, timely delivery is ensured. The current annual production capacity is 1 million units. This product series has passed the EU CE environmental directive certification. The company is certified under the *** quality management system. The main products in this series include: M12 sockets (panel-mounted, PCB solder, special types), 7/8 connectors, mining connectors, solar simulators, M8 connectors, and more. Our company specializes in customizing products according to specific user requirements. For more detailed product parameters or business discussions, please contact us. more>

$102

Category: Instruments & Meters/Pressure Instruments/Other Pressure Instruments

Company: 烟台乐森机械设备有限公司

Product Description: Hereby I declare: Due to fluctuations in raw material prices, the specific models and prices may vary. For detailed quotations, please contact our sales personnel.The single hydraulic prop dynamometer is an instrument used to detect the initial support force (working resistance) of single hydraulic props. It features a compact size, light weight, portability, ease of operation, and high accuracy. Particularly, its rational process and structural design make it highly favored by operators among similar products. With low cost, it is suitable for batch equipping and daily portable testing in high-grade general mining faces. It is ideal for daily quality inspection of single hydraulic prop support. The SY-60 dynamometer is dedicated to daily pressure measurement and pressurization tasks.Main parameters of the single prop working resistance tester:Model: SY-60A Pressure range: 0-60MPA  Emulsion cylinder: None Accuracy grade: 2.5 Weight: 1.5kgModel: SY-60B Pressure range: 0-60MPA Emulsion cylinder: Included Accuracy grade: 2.5 Weight: 2.5kgFeatures of the single prop working resistance tester:It offers advantages such as ease of use, rational structure, innovative design, and accurate testing.Usage instructions for the single hydraulic prop dynamometer:Before use, manually reset the needle (red needle) to zero, then proceed with pressure testing. The main needle (black needle) displays the current pressure, while the auxiliary needle shows the pressure during the testing process.After use, reset the auxiliary needle to zero.Do not open the pressure gauge if it malfunctions to avoid damage.This pressure gauge follows the verification regulation JJG52-87.When two or more pressure gauges are used on one device, the boxed mining dual-needle shock-resistant pressure gauge can be selected. This instrument is suitable for pressure measurement of single hydraulic props in coal mines. Actions speak louder than words—the single prop working resistance tester not only measures prop pressure but also pressurizes the prop. During testing, it ensures that the prop does not experience pressure loss (reduction).Contact: Manager Hu Phone: 16653525598 more>

$89

Category: Chemicals/Plastics & Products/Plastic Additives

Company: 广州艾浩尔防霉抗菌科技有限公司

Product Description: Model: iHeir-SPBrand: iHeirPurpose: Prevents mold on materials such as jewelry boxes, wine boxes, and phone boxesAppearance: Colorless and transparentTreatment Method: Surface spraying, or diluted with water for soaking in proportionProduct IntroductionThe fast-drying mold and antibacterial inhibitor is a colorless, transparent liquid, certified by the U.S. EPA as an environmentally friendly product. It is formulated using nano antibacterial technology and organic, safe, and highly effective mold inhibitors. As a non-releasing treatment agent, it does not seep, migrate, or get consumed by microorganisms. Through a unique mechanical sterilization method (surface spraying), it imparts excellent durability to treated products and provides consistent protective functions against microbial growth, preventing damage caused by microorganisms and extending the service life of leather and textile products. As a durable antimicrobial treatment agent, it offers broad-spectrum antibacterial activity.Product FeaturesColorless, odorless, safe, environmentally friendly, EU certifiedUsage InstructionsThe fast-drying mold and antibacterial inhibitor is applied by spraying. Its mold prevention principle involves forming an antibacterial protective layer on the product surface, which actively kills mold upon contact, ensuring the product remains mold-free even in humid environments. It can also be applied using brushes, ordinary hand-pump spray bottles, air-pressure spray guns, or specialized mold inhibitor sprayers. It dries naturally at room temperature within 5 minutes. Pay extra attention to stitching areas by increasing the dosage. For materials like suede, napped leather, and sanded leather, ensure proper atomization before treatment to avoid leaving marks.PrecautionsAlthough the fast-drying mold and antibacterial inhibitor is an environmentally friendly product, individuals with sensitive skin may still experience allergic reactions. It is recommended to wear protective clothing, goggles, and rubber gloves to avoid skin contact. If contact occurs, wash thoroughly with plenty of water and soap. If it gets into the eyes, rinse immediately with plenty of water or seek medical attention.Packaging Specifications and StoragePackaging: Industrial packaging uses blue square plastic buckets, while household packaging comes in 500ml bottles with manual sprayers. Custom packaging specifications are available upon request.Storage: Store in a cool, dry place away from direct sunlight. Keep out of reach of children. more>

Negotiable

Category: Construction & Building Materials/Glass/Processed Glass

Company: 杭州新安江工业泵有限公司

Product Description: more>

$6

Category: Chemicals/Chemical Intermediates/Intermediate Compounds

Company: 中山市五桂山耀王邦建材厂

Product Description: I. Differences in Performance Compared to Latex PaintWhen choosing wall materials, people often compare different coatings. So, which is better, Marla Colored Stone or latex paint? Both have their own characteristics. Latex paint primarily offers a flat finish with uniform color but a single texture, and it is relatively affordable, making it suitable for simple and economical decoration. Marla Colored Stone art paint, on the other hand, features three-dimensional textures that can mimic the look of stone, offering stronger decorative appeal. It also outperforms some latex paints in terms of scrubbing resistance and crack resistance, though it comes at a slightly higher price. If you prioritize design and durability for your walls, Marla Colored Stone art paint is the more suitable choice. If you have a limited budget and prefer a minimalist style, latex paint may be more appropriate.II. Reference for Material LifespanThe lifespan of wall materials affects the cost-effectiveness of decoration. The lifespan of Marla Colored Stone depends on the usage environment and maintenance. In dry, well-ventilated indoor environments with proper daily care, it can generally last for a long time. Even in areas with higher humidity, as long as basic moisture protection is in place, it can maintain good condition. Based on most usage cases, under normal maintenance, its lifespan meets the needs of households and ordinary commercial spaces, reducing the hassle of frequent material replacement. The specific duration may vary depending on actual conditions.III. Real Feedback from UsersHomeowners' actual experiences reflect the true performance of the material, and Marla Colored Stone user reviews cover various perspectives. Some homeowners mention that the wall texture after decoration is more natural than expected, and friends often ask about the material brand when visiting. Others share that after two years of use, the walls show no significant fading, and daily bumps leave only minor marks, with the overall appearance remaining attractive. Some also note that the construction process was smoother than expected, with workers following instructions, resulting in a final effect that closely matches the renderings. These feedbacks provide practical references for others considering its use.IV. Other Practical FeaturesMarla Colored Stone art paint offers a wide range of color choices, from light neutrals to rich dark shades, making it compatible with various decoration styles. The requirements for the base layer during construction are not overly strict, as walls with simple treatment can be used, saving preparation time. Its environmental performance meets relevant standards, with minimal indoor odor after application, making it suitable for households with elderly people or children. Additionally, its weather resistance remains stable in indoor environments, reducing issues like powdering or peeling over long-term use, making maintenance relatively convenient.If you are in the process of selecting wall materials, Blue Kingfisher Marla Colored Stone art paint is worth considering for its decorative and durable qualities. If you would like to learn more about user cases or construction details, feel free to inquire at any time. more>

Negotiable

Category: Construction & Building Materials/Waterproof & Moisture-Proof Materials/Waterproof & Moisture Proof Materials

Company: 中山有行企业胶类制品有限公司

Product Description: more>

$380

Category: Safety & Security/Fire Protection Equipment/Other Fire Protection Equipment

Company: 章丘金安盾消防科技有限公司

Product Description: Quick-Opening Pressure-Regulating Frost-Proof Self-Draining Outdoor Underground Fire Hydrant SA100/65-1.6  Fire Hydrant and Fire Monitor Manufacturer Quality Assurance Test Reports Complete Range of Models Low Price Technical Parameters Comprehensive Image GalleryThe SA series quick-opening, pressure-regulating, frost-proof outdoor underground fire hydrants manufactured by our company are widely used in petrochemical enterprises, grain storage and wood processing facilities, as well as light textile industries, ports and terminals, airports, storage depot areas, and various levels of fire protection units. They can also be used in municipal settings and enterprises and institutions across various industries, and are especially reliable for use in cold regions of the north.This product improves upon key components of standard outdoor fire hydrants, making it more practical. Structurally, our fire hydrants feature a spring-enclosed drainage outlet and achieve positive pressure sealing, significantly enhancing the hydrant's sealing performance and providing noticeable leak prevention.Our fire hydrants offer the following features:1. Easy Opening Function: Quick switching; using a wrench to rotate 4/5 turns allows for instant full closure and opening. Conventional fire hydrants require strenuous effort to open, which can cause tension and confusion during emergency fire situations, potentially delaying rescue operations. This feature saves valuable time in firefighting.2. Pressure Reduction and Stabilization, Pressure Regulation Function: Utilizing water pressure, the internal pressure reduction and regulation device of our fire hydrants opens in stages. A portion of water first passes upward through the pressure reduction device, with sequential stage-by-stage opening, achieving pressure reduction, stabilization, and regulation effects.Our company is a manufacturer specializing in the production and sales of firefighting equipment, fire protection facilities, and firefighting devices.Main products include: fire water monitors, foam monitors, electrically controlled fire water monitors, SP40AZK fully-equipped fire monitors, SP60AZK frost-proof fire monitors, mobile fire monitors, impact-resistant pressure-regulating fire hydrants, quick pressure-regulating fire hydrants, pressure-type foam proportioning systems, mobile foam fire extinguishing devices, air foam generators, MPS foam fire hydrants, and more.With 20 years of experience in producing firefighting products, our factory has achieved high quality and high standards in above-ground and underground fire hydrant products for nearly a decade. All finished fire hydrants leaving our factory pass quality inspections!! We welcome friends from all sectors to visit our company for tours, guidance, and business discussions. Recognize true value! Your patronage is welcome! more>

Negotiable

Category: Chemicals/Chemical Intermediates/Intermediate Compounds

Company: 南京瑞尼克科技开发有限公司

Product Description: Product IntroductionPFA wash bottles, also known as Teflon wash bottles or imported polytetrafluoroethylene wash bottles, are used for high-end experiments such as trace and ultra-trace analysis, isotope detection, and ICP-MS/OES/AAS analysis.Common specifications: 60ml, 100ml, 250ml, 300ml, 500ml, 1000ml, etc.Product Features1. Semi-transparent appearance;2. High and low temperature resistance: operating temperature range -200°C to +260°C;3. Corrosion resistance: resistant to strong acids, strong alkalis, aqua regia, hydrofluoric acid, and other organic solvents;4. Contamination prevention: low metal element content;5. Nozzle and cap are integrally formed: open mouth allows for high-pressure sterilization;6. Can replace volumetric flasks for preparing standard solutions: enables drop-by-drop sample and water addition, with no residue left in the return nozzle;Related Product RecommendationsPFA sample storage bottles, PFA wash bottles, PFA volumetric flasks, PFA measuring cups, PFA beakers, PFA digestion tubes, PFA sample dissolution vessels, PFA microcolumns, PFA crucibles, PFA valves, PFA connectors, PFA transfer tubes, etc. more>