OPC-3106T High Flow Laser Particle Counter

OPC-3106T High Flow Laser Dust Particle Counter

1. Light Source: Semiconductor Laser

2. Sampling Flow Rate: 28.3L/min, convertible to 8.5L/min, built-in flow sensor, automatic closed-loop flow control

3. Particle Size Channels: 0.3, 0.5, 0.7, 1.0, 3.0, 5.0, 7.0, 10.0μm

4. Display: 7-inch Capacitive Touch Screen

5. Power Supply: Rechargeable Lithium Battery 14.8V 9.6A

6, Uses imported DC brushless fan, PWM regulation control

7. Data Storage: Can store 30000 sets of data

8. Printing Function: Thermal Printer

Product Features

This instrument is developed in accordance with the requirements of the new GMP (2010 edition) in collaboration with Nanjing University of Science and Technology and other units.

The product's housing is made of 316L stainless steel. The laser sensor uses a full semiconductor laser and semiconductor

photodiode receiver, ensuring the stability of the light source and the accuracy of the signal receiver. Greatly reduces stray

light in the scattering chamber, improving the sensor's signal-to-noise ratio. Uses LCD liquid crystal touch screen control, making the displayed data clear and operation convenient.

The instrument can automatically determine various cleanliness levels based on customer-selected standards.

Application Range

This product is widely used in medical, pharmaceutical, electronic, chemical, optical, food, cosmetics, biological products, aerospace,

and various testing institutions for dust particle detection.

Main Technical Parameters:

Light Source: Semiconductor Laser, lifespan greater than 10 years>30000h

Sampling Flow Rate28.3L/min convertible to 8.5L/min (1ft³)±5%, can automatically maintain constant flow based on the length resistance of the sampling tube

Display Method155×85mm high-resolution capacitive touch screen, Chinese interface, real-time display, previous cycle display, real-time concentration display,

Can display time, date, measurement value, temperature and humidity, room number, sampling point, sampling times, status, and other parameters, 95% UCL calculation,

Can directly display particle concentration(particles/cubic meter), three-level permission management.

Power Supply/Operating Power Maximum Consumption:20W (1) Built-in long-life lithium battery: Can work continuously for 3.5 hours, external charger can quickly charge, charging

Power supply is 100V～220V, 50/60Hz

Operating Time8 hours

Counting Mode: Cumulative value, difference value, concentration value

Testing Mode: Single, repeat, continuous, calculation, remote,

Unit Conversion: Units can be converted tom³

Particle Size Channels0.3, 0.5, 0.7, 1.0, 3.0, 5.0, 7.0, 10.0μm

Sampling Cycle1～9999 (S) Delay Count: 0～9999（S）Self-cleaning Time: ≤10（min）

Operating Environment Temperature:0～40℃(50～104℉)Relative Humidity:20～90%RH, no condensation. Atmospheric Pressure: 86-106KPa

Temperature and Humidity: Optional（1）Temperature: 0～50℃±1℃.（2）Humidity: 0～100%RH±5%

UCL Settings Sampling Points（A）：2～9 points setting. Sampling Times per Point：（L）2～9 times setting Measurement Position: 0-9999

UCL Report Complies with ISO14644-1 2015, GB/T16292, GMP(2010), FS209E

Data StorageCan store 30000 sets of data (circular buffer)(including particle size, data, environmental data, year, month, day, time, sampling volume,

data port), data is not lost after power off.

Communication InterfaceAB line, 9600 baud rate, USB interface

Alarm Settings: The instrument has level alarm function, can alarm after exceeding standards for cleanrooms 100, 1000, 10000, 300000, 1000000 level, simultaneously

complies with the new GMP standard's A/B/C/D four levels static and dynamic standards measurement, four standard switching measurement

Zero Count Complies with JJF-1190-2008 Dust Particle Counter Metrology Calibration Specification and ISO/FDIS21501-4:2018 less than 1 per five minutes

Coincidence Error5%, 2,000,000 particles/cubic foot

Printing Function: Thermal Printer

Weight4.5kg

Calibration: Can meet JJF-1190-2008 Dust Particle Counter Metrology Calibration Specification, GB/T6167-2007 Dust Particle Counter Performance Test

Method and ISO/FDIS21501-4：2018（E）Cleanroom Light Scattering Dust Particle Counter Calibration Method, traceable to Shanghai

Institute of Measurement and Testing Technology. Can also be calibrated by ourselves or by third-party national metrology institutions, also traceable to the National Institute of

Standards and Technology（NIST). Our company has passed the national metrology establishment assessment, and the company's standard dust particle counter has participated in the national

dust particle counter value comparison organized by provincial metrology institutions, and is used as a standard precision particle counter by relevant metrology testing institutions

during dust particle counter metrology calibration work.

Standard Configuration: Professional Isokinetic Sampling Head, Sampling Stand with Sampling Tube, Built-in Printer, Aluminum Alloy Case, Operation Manual, Factory Test Report, Zero

Count Filter, Charger, Sampling Stand, Printing Paper

Dimensions200*180*180（mm）