Negotiable

Category: Instruments & Meters/Specialized Instruments/Other Specialized Instruments

Company: Shandong Bairun Water Resources Technology Co., Ltd

Product Description: 1. Product IntroductionThe WP20 Gate Opening Gauge is used to observe the changes in the opening height of various flat gates. It converts these changes into switch digital outputs through mechanical encoding, meeting the needs of relevant departments for collecting, transmitting, processing, recording, and displaying gate position data. The WP20 Gate Opening Gauge can also be applied to radial gates and miter gates, but it does not reflect the actual opening of the gate. The collected data must be processed through software before use.2. Product ParametersMeasuring range of opening: 0–8m (0–6m when used for non-flat gates)Resolution: 1cmGate position change rate: ≤20cm/sMeasurement error: more>

$5170

Category: Machinery & Equipment/Valves/Gate Valves

Company: Henan Evoker Industrial Equipment Co., Ltd.

Product Description: ECH4PE  63mm-125mm more>

$19999.99

Category: Instruments & Meters/Specialized Instruments/Other Specialized Instruments

Company: Xuzhou Haihe Hydrological Equipment Co., Ltd.

Product Description: The KD-I Gate Opening Indicator is specifically developed to meet the practical needs of the water conservancy, hydropower, and hydrology industries. It is an intelligent gate opening measurement and control device that operates relatively independently while also providing analog signal output for networking. The instrument utilizes embedded microcomputer control technology, offering powerful functionality, stable and reliable performance, high precision, and strong anti-interference capability. It serves as an opening measurement and control device for various gates, bridge cranes, gantry cranes, and hoisting equipment. It is suitable for applications where the relationship between the sensor and the actual gate opening is linear, such as with flat gates, as well as for nonlinear relationships, such as with radial gates and multi-layer steel cable drums. Nonlinear measurement employs a piecewise approximation method, dividing the entire range into several segments (this display uses 10 segments). Users only need to set the opening value at the end of each segment on the display based on actual measurements. For linear measurement, simply preset the opening value at the end of the first segment.The instrument uses a multifunctional 16-bit CPU for computation and control. The hardware includes a watchdog self-reset circuit, and both software and hardware incorporate multiple anti-interference measures, ensuring reliable operation in various industrial environments. The instrument allows for the setting of various parameters, features flash memory for storing preset parameters, and retains data during power loss. It offers multiple output interfaces including RS485, relays, and 4-20mA, facilitating integration into networked control systems.Gate Opening Measurement and Control Instrument (Secondary Display Instrument)II. Features1. Fully digital calibration: All parameter settings are completed via four keys on the panel. All set or calibrated parameters feature permanent memory retention during power loss.2. The opening sensor requires no mechanical zero adjustment; software zeroing can be performed at any point.3. Utilizes Modbus RTU communication protocol with selectable baud rates of 2400, 4800, 9600, and 19200. It can be directly integrated into communication networks of PLCs and upper computer configuration software that support Modbus-RTU protocol.4. Compact design, gate opening measurement, clear and intuitive Chinese LCD display, facilitating easy human-machine interaction.III. Technical Parameters of the Gate Opening Measurement and Control Instrument1. Measurement item: 1 channel for opening2. Resolution: Opening 1cm or 1mm;3. Measurement accuracy: Opening ±2cm (mm);4. Display method: 4*8 Chinese character library LCD display.5. Connection method between sensor and display: 485 signal, 4-20mA signal - 4-core RVVP cable; SSI signal - 6-core RVVP cable; Gray code signal - 16-core RVVP cable6. Wired distance between sensor and display: SSI signal ≤200M; Gray code, 4-20mA, 485 ≤1KM7. Remote data transmission method: 4-20mA current output, corresponding range settable; 485 signal8. Alarm and control functions1) Alarm control signal: Relay contacts. Contact capacity: 3A 24VDC, 3A 250VAC2) Upper limit: When the opening is greater than or equal to the upper limit value, the upper limit relay contact closes.3) Lower limit: When the opening is less than or equal to the lower limit value, the lower limit relay contact closes.4) Water filling: When the opening is within the water filling set and reset range, the relay closes.9. The microcontroller in the display is equipped with a Watchdog to prevent operational disorders.10. Operating conditions:     Ambient temperature: -25℃ ~ +60℃Relative humidity: ≤95% (RH 40℃)Power supply voltage: AC220 V ±10% ~ 50HzPower consumption: ≤15W11. Display instrument dimensions: 160 (W) × 80 (H) × 100 (D) mmPanel cutout dimensions: 152 (W) × 76 (H) mm more>

Negotiable

Category: Machinery & Equipment/Valves/Gate Valves

Company: Shanghai Jingou Industrial Valve Co., Ltd

Product Description: Pneumatic Knife Gate Valve Product OverviewOur company's PZ673H pneumatic knife gate valve is one of the series of pneumatic valve products manufactured by our company. During the production and application process, the pneumatic knife gate valve continuously digests and absorbs the advanced features of similar domestic and international products in terms of structure and manufacturing processes, constantly enhancing the technological content of the product. By focusing on technical details, the comprehensive performance of the knife gate valve has been improved. The pneumatic knife gate valve, when equipped with accessories such as solenoid valves and proximity switches, can achieve open and close position control and signal output, as well as continuous action automatic control. Users can make selections based on actual needs. The PZ673H (X, F) series pneumatic knife gate valves come in a complete range. The main body is made of cast iron, cast steel, stainless steel, etc., with diameters ranging from DN50 to DN1000. Pneumatic knife gate valve products are widely used in chemical, coal, sugar, sewage, papermaking, and other fields, making them an ideal sealing valve. They are particularly suitable for regulation and throttling in pipelines within the papermaking industry. more>

$4000

Category: Others

Company: Jining Anteli Machinery Equipment Co., Ltd

Product Description: TDSZElectro-hydraulic Sector Gate,Sector Gate, Pneumatic Sector Gate, Electric Sector GateProduct Model: TDSZ Electro-hydraulic Sector ValveAsh Discharge Capacity: 6-300 M³/h Nominal Diameter: 200*200-1000*1000                                                                                                                  Applicable Temperature: ≤300℃Drive Method: Manual, Electric, Pneumatic, Hydraulic, Electro-hydraulicApplicable Media: Powdered Materials, Crystalline Solids, Granular MaterialsII. TDSZ Electro-hydraulic Sector Valve Performance CharacteristicsThe electro-hydraulic sector gate is designed to meet the special needs of the building materials industry, serving as an ideal discharge device for dust removal equipment in cement clinker storage. The sector valve is equipped with a dust cover at the discharge outlet to prevent dust dispersion; it uses an electro-hydraulic push rod as the power source, replacing pneumatic transmission and saving engineering investment costs; the valve body adopts a stepped structure to reduce material flow impact;Main Products of Our Company:DTElectric Push RodDYTZElectro-hydraulic Push RodElectro-hydraulic Jaw Gate, Electric Jaw Gate Electro-hydraulic Rotator Drive Inlet SizeElectro-hydraulic Push Rod Drive Electro-hydraulic Push Rod Flat Gate Valve Electro-hydraulic Rotator Drive Inlet SizeElectro-hydraulic Push Rod Drive Electro-hydraulic Push Rod Flat Gate ValveElectro-hydraulic Rotator DriveInlet Size Electro-hydraulic Push Rod DriveElectro-hydraulic Push Rod Flat Gate ValveSteel Wire Rope Core Belt Stripping MachineElectric Push RodDTZElectric Push RodDYTPElectro-hydraulic Push RodExplosion-proof Push RodDEZJaw GateElectro-hydraulic Sector GateBelt Stripping MachineSteel Wire Rope Stripping MachineSingle-side DischargerDouble-side DischargerDDZBelt Break CatcherBelt Break Catcher for Belt ConveyorsBelt Break Protection Device Belt Break Catcher Layered Belt Stripping MachineBelt Conveyor AlignerChain-type One-way AlignerFully Automatic AlignerVariable Trough Angle DischargerElectro-hydraulic DischargerPlow DischargerJining Anteli Conveying Equipment Co., Ltd.Contact: Jia HuiMobile: 15965378780Tel:0537-2340887Fax:  0537-2340887QQ:  3128074961Email:3128074961@qq.comAlibaba Wangwang:jnanteli01  more>

$2000

Category: Others

Company: Jining Anteli Machinery Equipment Co., Ltd

Product Description: more>

Negotiable

Category: Machinery & Equipment/Engineering & Construction Machinery/Other Engineering & Construction Machinery

Company: Jingzhou Yashi Intelligent Equipment Co., Ltd.

Product Description: more>

$188

Category: Machinery & Equipment/Valves/Gate Valves

Company: Shanghai Kohong Valve Co., Ltd.

Product Description: GB/T584-2008 Marine Cast Steel Flange Globe ValveKehong Marine Valves - Shanghai Kehong Valve Co., Ltd. is a professional manufacturer of marine valves adhering to standards such as JIS, GB/CB, ANSI, and DIN. Main products include marine butterfly valves, marine hydraulic control butterfly valves, marine electric butterfly valves, marine pneumatic butterfly valves, marine globe valves, marine gate valves, marine steam traps, marine safety valves, marine pressure reducing valves, marine self-closing valves, marine quick-closing valves, marine diaphragm valves, marine seawater filters, marine oil filters, marine globe check valves, marine check valves, marine butterfly check valves, marine stainless steel globe valves, marine bellows globe valves, marine fire valves, marine plug valves, marine anti-splash valves, marine deck surface valves, marine boiler relief valves, marine sounding self-closing valves, marine level gauges, marine air vents, marine temperature control valves, marine pressure regulating valves, marine temperature regulating valves, marine sea valves, marine ball valves, marine breather valves, marine pressure reducing valve sets, marine safety valve sets, marine pipeline accessories, and other marine products. We also provide certification from various classification societies such as CCS, ABS, GL, LR, DNV, etc. For more information, please visit our official website: www.shkhvalve.com. Consultation hotline: 13651793726 more>

$188

Category: Machinery & Equipment/Valves/Gate Valves

Company: Shanghai Kohong Valve Co., Ltd.

Product Description: GB/T590-2008 Marine Flange Cast Iron Globe ValveKehong Marine Valves - Shanghai Kehong Valve Co., Ltd. is a professional manufacturer of marine valves according to standards such as Japanese Standard JIS, National Standard GB/CB, American Standard ANSI, German Standard DIN, etc. Main products include marine butterfly valves, marine hydraulic control butterfly valves, marine electric butterfly valves, marine pneumatic butterfly valves, marine globe valves, marine gate valves, marine steam traps, marine safety valves, marine pressure reducing valves, marine self-closing valves, marine quick-closing valves, marine diaphragm valves, marine seawater filters, marine oil filters, marine globe check valves, marine check valves, marine butterfly check valves, marine stainless steel globe valves, marine bellows globe valves, marine fire valves, marine plug valves, marine anti-splash valves, marine deck surface valves, marine boiler relief valves, marine sounding self-closing valves, marine level gauges, marine air caps, marine temperature control valves, marine pressure regulating valves, marine temperature regulating valves, marine sea valves, marine ball valves, marine breather valves, marine pressure reducing valve sets, marine safety valve sets, marine pipeline accessories, and other marine products. We can also provide certificates from various classification societies such as CCS, ABS, GL, LR, DNV, etc. For more information, please visit our official website: www.shkhvalve.com. Consultation hotline: 13651793726 more>

$188

Category: Machinery & Equipment/Valves/Gate Valves

Company: Shanghai Kohong Valve Co., Ltd.

Product Description: GB/T584-2008 Marine Cast Steel Flange Globe ValveKehong Marine Valves - Shanghai Kehong Valve Co., Ltd. is a professional manufacturer of marine valves conforming to standards such as JIS, GB/CB, ANSI, DIN, etc. Main products include marine butterfly valves, marine hydraulic control butterfly valves, marine electric butterfly valves, marine pneumatic butterfly valves, marine globe valves, marine gate valves, marine steam traps, marine safety valves, marine pressure reducing valves, marine self-closing valves, marine quick-closing valves, marine diaphragm valves, marine seawater filters, marine oil filters, marine stop-check valves, marine check valves, marine butterfly check valves, marine stainless steel globe valves, marine bellows globe valves, marine fire valves, marine plug valves, marine anti-splash valves, marine deck surface valves, marine boiler relief valves, marine sounding self-closing valves, marine level gauges, marine air vents, marine temperature control valves, marine pressure regulating valves, marine temperature regulating valves, marine sea valves, marine ball valves, marine breather valves, marine pressure reducing valve assemblies, marine safety valve assemblies, marine pipeline accessories, and other marine products. Certificates from classification societies such as CCS, ABS, GL, LR, DNV, etc., can be provided. For more information, please visit our official website: www.shkhvalve.com. Consultation hotline: 13651793726 more>

$68.00

Category: Machinery & Equipment/Valves/Gate Valves

Company: Shanghai Yunlong Marine Valve Co., Ltd.

Product Description: Marine Flanged Cast Iron Gate Valve CB/T465-1966, CB/T465-1995Marine Flanged Cast Steel Gate Valve CB/T466-1995Marine Flanged Bronze Gate Valve CB/T467-95, CB901-79 (P30 Flanged Bronze Gate Valve)Marine Flanged Tanker Gate Valve GB/T1857-80 CB/T3591-94Marine Flanged Stainless Steel Gate Valve CB/T3955-2004Marine German Standard Gate Valve DIN3202-F1/F4,Internal Thread Gate Valve CB3124-82Marine Flanged American Standard Forged Steel Gate Valve ANSI API, Marine Hydraulic Knife Gate Valve, Marine National Standard Flanged Forged Steel Gate ValveMarine Japanese Standard Gate Valve Marine Japanese Standard Bronze/Cast Iron/Carbon Steel Gate Valve JIS F7102 F7367 F7368 F7363 F7364 F7369 F7366 CBM1090-81Nominal Pressure; PN5K 10K 16KApplicable Media; Seawater, Freshwater, Lubricating Oil and Steam with Temperature Not Exceeding 300°CMain Material Description: Valve Body Material is Tin Bronze, Valve Stem Material is Aluminum Bronze, Valve Disc is Tin Bronze, Seal is PTFE.Marine Japanese Standard 5K10K Cast Steel Flanged Gate Valve JIS F 7363C JISF7366, CBM1092-81, CB/T4027-2005(10K) DN50-DN400ANominal Pressure; PN5K 10K 16KNominal Diameter DN50-DN400Applicable Media, Seawater, Freshwater, Lubricating Oil, Steam Not Exceeding 300°C.Main Component Material Description: Valve Body, Bonnet, and Valve Core Material are ZG230-450, Handwheel Material is HT200, Valve Stem is 1Cr12, Valve Body Seal Ring Material is H2Cr13Japanese Standard Marine Flanged Cast Iron 0.5MPa Gate Valve JIS F7363 CB/T4026-2005 CBM1091-81Nominal Pressure; PN5K 10K 16KNominal Diameter DN50-DN600Applicable Media, Seawater, Freshwater, Lubricating Oil, Steam Not Exceeding 220°C.Main Component Material Description: Valve Body, Bonnet, Valve Core, and Handwheel are Gray Cast Iron, Valve Stem is Stainless Steel, Valve Body Seal Ring Material is Welded Stainless Steel.Marine Cast Iron 16Kgf/c㎡ Gate Valve F7369Marine Japanese Standard Flanged Cast Iron/Cast Steel Gate Valve JIS F7363 F7364 F7369 F7363C F7366Nominal Pressure; PN5K 10K 16K 20K 30K40KApplicable Media, Seawater, Freshwater, Lubricating Oil, Steam Not Exceeding 300°C.Valve Body; Gray Cast Iron/Cast Steel, Valve Stem; Tin Bronze, Handwheel; Gray Cast Iron Nominal Diameter DN50-DN500Marine Flanged Cast Iron Gate Valve CB/T465-1966, CB/T465-1995, CBM1091-81Nominal Pressure (MPa): 0.25, 0.4, 0.6Nominal Diameter: DN50-DN500Applicable Media: Freshwater, Lubricating Oil, Fuel OilFlange Connection Standard: Type A According to GB/T569-65, AS According to GB2501-89 Gate ValveMaterial: Body, Cover, Valve Core are HT200, Valve Stem, Square Nut QA19-2Marine Flanged Cast Steel Gate Valve CB/T466-95, CBM1092-81Nominal Pressure (MPa): 0.25, 0.4, 0.6, 1.0Nominal Diameter: DN50-DN500Applicable Media: Freshwater, Lubricating Oil, Fuel OilFlange Connection Standard: Type A According to GB/T569-65, AS According to GB2501-89 Gate ValveMaterial: Body, Cover, Valve Core are ZG230-450, Valve Stem Material is 2Cr13, Square Nut QA19-2Marine Flanged Bronze Gate Valve CB/T467-1995Nominal Pressure (MPa): 0.25, 0.4, 0.6Nominal Diameter: DN40-DN500Suitable Media: Seawater, Freshwater, Lubricating Oil, Fuel OilFlange Connection Standard: Type A According to GB/T569-65, AS According to GB2501-89 Gate ValveMaterial: Body, Cover, Valve Core are ZCuSn10Zn2, Valve Stem Material is 2Cr13, Square Nut QA19-2Marine Flanged Tanker Gate Valve GB/T1857-80 CB/T3591-94Nominal Pressure: 1.0MPaNominal Diameter: DN80-DN400Type: A AS Type, B BS TypeSuitable Media: Seawater, Freshwater, OilMaterial: Body, Bonnet QT400-15 or Cast Steel, Valve Core ZG230-450, Valve Stem, Nut are CuAl9Mn2, Seal Ring is Stainless Steel 2Cr13, 1Cr18Ni9TiMarine Internal Thread Bronze Gate Valve CB/T3124-82This standard product is suitable for marine pipeline systems with media such as seawater, freshwater, air, fuel oil, lubricating oil, and steam up to 250°C. Nominal Pressure: 1.6MPaNominal Diameter: DN15-DN50Material: Valve Body, Bonnet, Valve Plate Material: Cast Tin Bronze ZQSn10-2 CB 883-78, Valve Stem Material: Aluminum Bronze QA1 9-2 YB 458-71Nominal Pressure and Test Pressure According to GB1048-70, Other Technical Conditions According to GB600-82Marine Flanged Stainless Steel Gate Valve CB/T3955-2004Applicable Media: Seawater, Freshwater, Lubricating Oil, Fuel Oil. Applicable Media: Corrosive Media with Temperature Not Lower Than -165°CType: A Type AS TypeNominal Pressure: 0.25MPa, 0.4MPa, 0.6MPaNominal Diameter: DN50-DN500.Main Component Material Description: Valve Body, Bonnet, Valve Core, Valve Stem, and Fasteners Material are Stainless Steel, Packing, Gasket Material is PTFEMarine ANSI API Type American Standard Gate ValveType: A Type, AS TypeNominal Diameter: DN15-DN1200Nominal Pressure; PN0.25, 0.4, 0.6, 1.0, 1.6, 2.5MPA, 125LB, 150LB, 300LBApplicable Media: Seawater, Freshwater, Lubricating Oil, Fuel Oil, Steam with Temperature Not Exceeding 300°C.Main Component Materials: Valve Body: Cast Iron/Cast Steel/Stainless Steel/Aluminum Bronze; Valve Stem Material is Aluminum Bronze/Stainless Steel; Valve Disc Material is Aluminum Bronze/Stainless Steel.Marine DIN Type Gate Valve DIN3202-F1/F4Nominal Pressure PN1.0-1.6,Applicable Media; Water, Oil, Steam,Operating Temperature: 0-80°CNominal Diameter; DN40-DN1200,Material: Valve Body, Bonnet, Shaft Cover are Ductile Iron, Gate is Ductile Iron Coated with EPDM, Valve Stem is Stainless Steel, Bolts, Nuts are Galvanized, Seal Ring, "O" Ring is NBR, Thrust Washer, Bush are Tin Bronze, Handwheel: Cast Iron. more>

Negotiable

Category: Others

Company: Shanghai Laiduo Industrial Co., Ltd.

Product Description: Product Overview:The hydraulic bottom-opening weir gate is an upward-closing and downward-opening gate driven by hydraulic power. It is primarily used in locations such as intercepting wells, discharge outlets, and sewage outfalls, and functions for interception, flushing, regulating upstream water levels, flow control, and backflow prevention.The hydraulic bottom-opening weir gate consists of a fixed frame, movable gate, hydraulic drive unit, front liquid level sensor, rear liquid level sensor, and control system. The gate is driven by the hydraulic system and can stop at any position within its stroke range. Through the front liquid level sensor, the gate can regulate the upstream water level and control flow; rapid descent of the gate enables flushing of downstream pipes and culverts; and with the rear liquid level sensor, the gate prevents downstream water from flowing backward, thereby providing backflow prevention.Product Features:1. Capable of regulating upstream water levels and controlling flow;2. Compact structure, with the gate opening downward, saving upper installation space and avoiding impact on above-ground landscapes;3. When fully opened, it aligns flush with the bottom, not affecting flood discharge;4. The frame and gate are made of stainless steel, offering strong corrosion resistance and long service life;5. When used in conjunction with liquid level sensors, it can rise with increasing downstream water levels to prevent backflow;6. The gap between the gate and the frame is prone to clogging by sediment and requires regular maintenance. more>

Negotiable

Category: Others

Company: Shanghai Laiduo Industrial Co., Ltd.

Product Description: Product Overview:The bidirectional water-stop and flow-limiting gate utilizes two-way water-stop technology on both the upstream and downstream faces, serving as a common water-retaining and sealing device in drainage engineering. It regulates the flow entering sewage treatment plants and enables rational distribution of sewage volume. more>

$1

Category: Others

Company: Beijing Quan'an Era Electronic Technology Co., Ltd

Product Description: 测温门，安检门，热成像测温仪，安检机，手持金属探测器，防爆毯租售测温门热成像测温仪安检门安检机手持探测器租售我公司出租出售：测温门、热成像测温仪、人脸识别测温仪、安检门、安检机、手持安检器、电子存包柜、车底检查镜、防爆毯、防爆罐等等。同时我公司出租出售测温门、安检门、安检机、手持安检器，大型展会活动、展会、庙会、各行各业产品发布会等等各种活动的安检设备。产品有：测温门、安检门出租安检机出租安检设备出租手持安检器出租1、小型安检机2、中型安检机3、大型安检机4、手持安检器5、金属安检门6、测温安检门 more>

$电议

Category: Machinery & Equipment/Valves/Gate Valves

Company: Shanghai Xingmailong Valve Group Co., Ltd

Product Description: Brass Locking Gate Valve (FG15S)Technical Specifications:Working Pressure: PN1.6MPaWorking Medium: Water, Non-corrosive LiquidsOperating Temperature: -20℃ ≤ t ≤ 120℃Pipe Thread Standard: Complies with ISO228 StandardMain External DimensionsDN (mm)NPS(in)LHDSB151/24360.5882514203/446.56788311625152708837.320321¼5685.68847.527401½61.59590543350267113.2906643Brass Locking Gate Valve (FG15S)Technical Specifications:Working Pressure: PN1.6MPaWorking Medium: Water, Non-corrosive LiquidsOperating Temperature: -20℃ ≤ t ≤ 120℃Pipe Thread Standard: Complies with ISO228 StandardMain External DimensionsDN (mm)NPS(in)LHDSB151/24360.5882514203/446.56788311625152708837.320321¼5685.68847.527401½61.59590543350267113.2906643 more>

$面议

Category: Construction & Building Materials/Thermal Insulation Materials/Other Insulation Materials

Company: Xinhe County Jiangfan Water Conservancy Machinery Factory

Product Description: Xinhe County Jiangfan Water Conservancy Machinery Factory is a comprehensive manufacturer in the hydraulic machinery industry, integrating manufacturing, metal structures, casting, machining, heat treatment, and final assembly. For over a decade, our factory has adhered to the following operational philosophy.Our main products include:1. Flap gates, categorized into: cast iron, steel, composite materials. Composite flap gates often refer to FRP (fiberglass reinforced plastic) flap gates, available in various models and specifications from 200mm to 2600mm.2. Screw lift gates, categorized into: flat push type, handwheel type, side crank type, manual type, electric type, manual-electric dual-use type, direct connection type, single and double lifting point screw lift gates.3. Hoist gates, categorized into: gantry type, mobile type, radial gate type (QPQ, QPK, QPT, QHQ), available in various models and specifications from 5T to 250T, including single and double lifting points.4. Debris cleaning equipment series, including: stainless steel fine bar screens with specific gap widths, trash racks, toothed rotary screen cleaners, rotary screen cleaners, GLGS high-chain type screen cleaners, YZL type spiral presses, XGS rotary screen cleaners, HZG rotary screen cleaners, and conveyors.5. Cast iron (composite) gates: Suitable for areas with deeper water heads, such as hydropower stations and reservoirs.6. Cast iron (bronze-inlaid) gates: Available in over sixty specifications from 0.2m × 0.2m to 6.5m × 6.5m, commonly used in hydropower stations, reservoirs, agricultural water conservancy, and sewage treatment plants.7. Steel gates and stainless steel gates: Primarily used for environmental protection and sewage treatment.8. The Yuanshuo brand series of gates produced by our factory are safe to use, structurally sound, and perform excellently.9. Various specifications of waterstop rubber and expansion joint elastic rubber strips.Our enterprise sincerely collaborates with both new and existing customers, offering superior product quality, enthusiastic and attentive service, and reasonable product pricing. more>

$面议

Category: Others

Company: Xinhe County Jiangfan Water Conservancy Machinery Factory

Product Description: Xinhe County Jiangfan Water Conservancy Machinery Factory is a comprehensive manufacturer in the hydraulic machinery industry, integrating manufacturing, metal structures, casting, machining, heat treatment, and final assembly. This has been the operational philosophy upheld by our factory for over a decade.Our main products include:1. Flap gates, which are categorized into: cast iron, steel, composite materials. Composite flap gates often refer to fiberglass reinforced plastic (FRP) flap gates, available in various models and specifications from 200mm to 2600mm.2. Screw hoists, which are divided into: flat push type, handwheel type, side crank type, hand-operated type, electric type, dual-purpose hand-electric type, direct-connected type, single and double lifting point screw hoists.3. Winch hoists, which include: gantry type, mobile type, radial gate type (models such as QPQ, QPK, QPT, QHQ), ranging from 5T to 250T, available in single and double lifting point configurations and various models.4. Debris cleaning equipment series, which include: stainless steel fine bar screens with specific gap widths, trash racks, toothed rotary screen cleaners, rotary screen cleaners, GLGS high-chain type screen cleaners, YZL type spiral presses, XGS rotary screen cleaners, HZG rotary screen cleaners, and conveyors.5. Cast iron (composite) gates: Suitable for waters with relatively high heads, such as hydropower stations and reservoirs.6. Cast iron (bronze-inlaid) gates: Available in over sixty specifications from 0.2m × 0.2m to 6.5m × 6.5m, commonly used in hydropower stations, reservoirs, agricultural water conservancy, and sewage treatment plants.7. Steel gates and stainless steel gates: Primarily used for environmental protection and sewage treatment.8. The Yuanshuo brand series of gates produced by our factory are safe to use, structurally sound, and perform excellently.9. Various specifications of waterstop rubber and expansion joint elastic rubber strips.Our enterprise sincerely collaborates with both new and existing customers, offering superior product quality, enthusiastic and attentive service, and reasonable product pricing. more>

$面议

Category: Others

Company: Xinhe County Jiangfan Water Conservancy Machinery Factory

Product Description: Xinhe County Jiangfan Water Conservancy Machinery Factory is a comprehensive manufacturer in the hydro-mechanical industry, integrating manufacturing, metal structures, casting, machining, heat treatment, and final assembly. For over a decade, our factory has adhered to this operational philosophy.Our main products include:1. Flap gates, categorized into: cast iron, steel, composite materials. Composite flap gates often refer to FRP (fiberglass reinforced plastic) flap gates, available in various models and specifications from 200mm to 2600mm.2. Screw lift gates, categorized into: flat push type, handwheel type, side crank type, manual type, electric type, dual manual-electric type, direct connection type, single and double lifting point screw lift gates.3. Hoist-type lift gates, categorized into: gantry type, mobile type, radial gate type (QPQ, QPK, QPT, QHQ), available in various models and specifications from 5T to 250T, including single and double lifting points.4. Cleaning equipment series, including: stainless steel fine bar screens with specific gap widths, trash racks, toothed rotary screen cleaners, rotary screen cleaners, GLGS high-chain type screen cleaners, YZL type spiral presses, XGS rotary screen cleaners, HZG rotary screen cleaners, and conveyors.5. Cast iron (composite) gates: Suitable for areas with relatively high water heads, such as hydropower stations and reservoirs.6. Cast iron (bronze-inlaid) gates, available in over sixty specifications from 0.2m×0.2m to 6.5m×6.5m, widely used in hydropower stations, reservoirs, agricultural water conservancy, and sewage treatment plants.7. Steel gates and stainless steel gates: Primarily used for environmental protection and sewage treatment.8. The Yuanshuo brand series of gates produced by our factory are safe to use, structurally rational, and perform excellently.9. Various specifications of waterstop rubber and expansion joint elastic rubber strips.Our enterprise sincerely cooperates with both new and existing customers, offering excellent product quality, warm and attentive service, and reasonable product prices. more>

$面议

Category:

Company: Xinhe County Jiangfan Water Conservancy Machinery Factory

Product Description: Xinhe County Jiangfan Water Conservancy Machinery Factory is a comprehensive manufacturer in the hydraulic machinery industry, integrating manufacturing, metal structures, casting, machining, heat treatment, and final assembly. This has been the operational philosophy upheld by our factory for over a decade.Our main products include:1. Flap gates, which are categorized into: cast iron, steel, composite materials. Composite flap gates often refer to FRP (fiberglass reinforced plastic) flap gates, available in various models and specifications from 200mm to 2600mm.2. Screw hoists, which are divided into: flat push type, handwheel type, side crank type, hand-operated type, electric type, dual-purpose hand-electric type, direct-connected type, single and double lifting point screw hoists.3. Winch hoists, which are categorized into: gantry type, mobile type, radial gate type (models such as QPQ, QPK, QPT, QHQ), available in various models and specifications from 5T to 250T for both single and double lifting points.4. Debris cleaning equipment series, which include: stainless steel fine bar screens with specific gap widths, trash racks, toothed rotary screen cleaners, rotary screen cleaners, GLGS high-chain type screen cleaners, YZL type spiral presses, XGS rotary screen cleaners, HZG rotary screen cleaners, and conveyors.5. Cast iron (composite) gates: Suitable for waters with relatively high head, such as hydropower stations and reservoirs.6. Cast iron (bronze-inlaid) gates: Available in over sixty specifications ranging from 0.2m × 0.2m to 6.5m × 6.5m, widely used in hydropower stations, reservoirs, agricultural water conservancy, and sewage treatment plants.7. Steel gates and stainless steel gates: Mainly used for environmental protection and sewage treatment.8. The Yuanshuo brand series of gates produced by our factory are safe to use, structurally sound, and perform excellently.9. Various specifications of waterstop rubber and expansion joint elastic rubber strips.Our enterprise sincerely cooperates with both new and existing customers by offering high-quality products, warm and attentive service, and reasonable product prices. more>

$面议

Category: Hardware & Tools/Castings/Iron Castings

Company: Xinhe County Jiangfan Water Conservancy Machinery Factory

Product Description: Xinhe County Jiangfan Water Conservancy Machinery Factory is a comprehensive manufacturer in the hydraulic machinery industry, integrating manufacturing, metal structures, casting, machining, heat treatment, and final assembly. This has been the operational philosophy upheld by our factory for over a decade.Our main products include:1. Flap gates, which are categorized into: cast iron, steel, composite materials. Composite flap gates often refer to fiberglass reinforced plastic (FRP) flap gates, available in various models and specifications from 200mm to 2600mm.2. Screw hoists, which are divided into: flat push type, handwheel type, side crank type, hand crank type, electric type, dual-purpose hand-electric type, direct-connected type, single and double lifting point screw hoists.3. Winch hoists, which are categorized into: gantry type, mobile type, radial gate type (models including QPQ, QPK, QPT, QHQ), available in various models and specifications from 5T to 250T for both single and double lifting points.4. Debris cleaning equipment series, which include: stainless steel fine bar screens with specific gap widths, trash racks, toothed rotary screen cleaners, rotary screen cleaners, GLGS high-chain type screen cleaners, YZL type spiral presses, XGS rotary screen cleaners, HZG rotary screen cleaners, and conveyors.5. Cast iron (composite) gates: Suitable for waters with relatively high heads, such as hydropower stations and reservoirs.6. Cast iron (bronze-inlaid) gates: Available in over sixty specifications ranging from 0.2m × 0.2m to 6.5m × 6.5m, commonly used in hydropower stations, reservoirs, agricultural water conservancy, and sewage treatment plants.7. Steel gates and stainless steel gates: Primarily used for environmental protection and sewage treatment.8. The Yuanshuo brand series of gates produced by our factory are safe to use, structurally sound, and perform excellently.9. Various specifications of waterstop rubber and expansion joint elastic rubber strips.Our enterprise sincerely cooperates with both new and existing customers by offering high-quality products, warm and attentive service, and reasonable product prices. more>