ස්කන්ධ ද්‍රව්‍ය එක් කේන්ද්‍රයට සපයන පද්ධතිය, පෙරළීම් පිරිසක් කිරීම, ස්වයංක්‍රීය අනුපාත කිරීම, PLC වැඩසටහන් පාලනය

Cutting fluid centralized supply systemFiltration and purificationAutomatic proportioningPLC program control

Regarding how to realize the cutting fluid supply for machine tools, most people will think of the cutting fluid centralized supply system. The function of the cutting fluid centralized supply system is to pour the cutting fluid used in processing in the workshop into a large pool, and transport the cutting fluid to various machine tools through the conveying of liquid troughs. The number of main equipment can be confirmed according to the production capacity, then confirm the required cutting fluid flow rate, and build a centralized supply system of suitable scale. The mainstream design nowadays is upper discharge and upper supply, with all pipelines erected overhead from above.

The main advantage of the centralized supply system is that it can effectively remove floating oil and metal particles in the grinding fluid through filtration methods and perform continuous cyclic removal. Regularly inspect the quality and use additives or add stock solution in a planned way based on these inspection results, which are important factors that enable the centralized system to effectively extend the service life of the cutting fluid. This also reduces the waste liquid treatment of water-soluble grinding fluid.

The centralized filtration and cooling system is a machinery adopting large-circulation, large-flow and large-stroke liquid回流 (wait, no, 回流 is backflow). The centralized filtration and cooling system is a machinery adopting large-circulation, large-flow and large-stroke liquid backflow. The cutting fluid dissipates heat quickly, the temperature of the supply system is low, and there is an internal circulation during the shutdown period, so that the large-flow cutting fluid can flow continuously, which effectively inhibits the growth of bacteria. At the same time, it is also easy to automatically control the performance indicators of the cutting fluid and ensure the quality of the cutting fluid; in addition, using the centralized supply system for cutting fluid can centrally filter the cutting fluid, remove metal debris and other impurity oils in the cutting fluid, and extend the service life of the cutting fluid. At the same time, the filtered cutting fluid can be recycled, reducing the cost of using cutting fluid, saving resources and protecting the environment.

The supply and return modes of the cutting fluid centralized filtration system can be divided into the following three types according to the workshop conditions and the properties of the cutting fluid:

1. Overhead supply and trench chip flushing return, namely upper supply and ground discharge;

2. Both supply and return liquid use overhead pipelines, namely upper discharge and upper supply. This scheme makes full use of the three-dimensional space of the workshop, has the smallest floor area, and has compact machine tool layout. Most newly built factories adopt this scheme nowadays

3. Both the supply liquid pipeline and the return liquid system are located in the trench; For details, you can follow Yuteng Environmental Protection

Warm reminder: The price is for reference only! You can call for consultation if you need it! Products can be customized according to customer requirements!