gear-type oil transfer pump, small-flow oil transfer pump
Contact Info
- Add:North Section of Industrial Road, Yutai County Economic Development Zone, Zip:
- Contact: 吴经理
- Tel:13012608150
- Email:15314489@qq.com
Other Products
1. Overview of 2CY and KCB Gear Oil Pumps
The 2CY and KCB gear transfer pumps are horizontal rotary pumps, with a flow range of 0.045-30m³/h, a pressure range of 0.7-20MPa, and a working speed of 1200-4000r/min. They are widely used in industries such as petroleum, chemical, shipbuilding, electric power, grain and oil, food, medical, building materials, metallurgy and others. They are suitable for transporting lubricants or heavy oil, diesel oil, lubricating oil with a temperature below 180°C and a viscosity of 5-1500cst. Equipped with copper gears, they can transport liquids with low ignition point. Stainless steel gear pumps can also be produced for transporting beverages and corrosive liquids.
2. Structure of 2CY and KCB Gear Oil Pumps
The 2CY and KCB gear transfer pumps are mainly composed of pump body, gears, bearing seats, pressure relief valves, bearings and sealing devices and other components. They are directly connected to the drive motor with an elastic coupling and installed on a common cast iron chassis. The pump body, bearing seats and other parts are made of gray cast iron, and the gears are made of carbon steel. They can also be made of copper or stainless steel according to the special needs of users. There is a stuffing box on the bearing seat, which plays an axial sealing role. The KCB-300~960 type pump adopts a skeleton sealing device (the sealing form can also be replaced according to customer needs, such as mechanical seal.) The bearing adopts a single-row radial ball bearing. The KCB-18.3~83.3 type pump is composed of two oil-resistant rubber rings and a spacer in the middle. The tightness of the seal is adjusted by adjusting the two nuts on the pressure cover, and the bearing adopts a copper-based powder oil-impregnated bearing. In addition, this series of pumps can all use flexible graphite with good elasticity, high and low temperature resistance, stable chemical properties and self-lubricating performance as packing. A pressure relief valve is installed in the pump. When the pump or the discharge pipeline fails or the discharge valve is accidentally closed, resulting in high pressure and high pressure impact, the pressure relief valve will automatically open to remove part or all of the high-pressure liquid back to the low-pressure chamber, thereby protecting the pump and the pipeline.
3. Working Principle of 2CY and KCB Gear Oil Pumps
This type of pump is equipped with a pair of rotating gears in the pump body, one driving and one driven. By relying on the mutual meshing of the two gears, the entire working chamber in the pump is divided into two independent parts: the suction chamber and the discharge chamber. When the pump is running, the driving gear drives the driven gear to rotate. When the teeth are disengaged from the meshing on the suction side, a partial vacuum is formed, and the liquid is sucked in. The sucked liquid fills each tooth space of the gears and is brought to the discharge side. When the gears enter meshing, the liquid is squeezed out to form high-pressure liquid, which is discharged out of the pump through the discharge port of the pump.
4. Model Parameters of 2CY and KCB Gear Oil Pumps
| Industry Category | Machinery & Equipment/General Mechanical Parts/Pumps |
|---|---|
| Product Category | |
| Brand: | 诺西德 |
| Spec: | KCB |
| Manufacturer: | 山东诺西德机械矿业设备有限公司 |
| Origin: | 113708 |
