Toocle find for you 333 information about the as-ajs.com.cn, total 17 pages
AS/NZS 5000.3 CU V-90 5V-90 SAA Certification for Australian Standard Cable
Negotiable
Category: Electrical Equipment & Supplies/Power Distribution & Transmission/Distribution Panels
Company: 上海埃因贝克国际贸易有限公司
Product Description: Product IntroductionProduct ApplicationUsed for power, control, and connection cables in electrical facilities. Installation methods include fixed laying and mobile laying, with no defined cable path and no tensile stress. The cable is suitable for dry, damp, and wet indoor environments.Product Features· SAA Certified· Flame retardant compliant with IEC 60332-1-2· Allows parallel installation with other 1000 V cablesTechnical Certifications· Compliant with RoHS standards· Compliant with 2014/35/EU guidelines ("Low Voltage Directive") CE.Product StructureConductor Material: Bare copper wireConductor Class: Compliant with IEC 60228 cl.5 standardCore Insulation: PVCCore Identification: Black core with white numbers, with or without GNYEStranding: Layered strandingBraiding: (Optional) Tinned copper wire braidingOuter Sheath: PVCOuter Sheath Color: Black RAL9005 or Gray RAL7001Rated Voltage: 450/750VTest Voltage: 2.5 kVConductor Resistance: Compliant with ASNZS1125 standardBending Radius (Fixed): 7.5xdBending Radius (Mobile): 15xdTemperature Rating (Fixed): -15°C/+90°CTemperature Rating (Mobile): -5°C/+90°CFlame Retardant Rating: Self-extinguishing, compliant with IEC 60332-1 standardStandard: AS/NZS 5000.3 more>
Send Inquiry

STC provides testing services for U.S. environmental standards such as California Proposition 65, HR4040 CPSIA, and heavy metals including lead/cadmium (6P).
$100
Category: Others
Company: Dongbang Standard Inspection & Testing Co., Ltd.
Product Description: 本中心提供专业,及获得CNAS认可授权-- 铅、镉、6P、8P等(CPSIA/HR4040)测试服务的实验室。出具测试报告全球认可!H.R.4040是美国生效消费品安全改进法案(PSIA/HR4040)的习惯简称,并于2008年8月14日由总统布什正式签署为法律。具体内容如下:最严厉的消费者保护法案该法令是自1972年消费品安全委员会(SC)成立以来最严厉的消费者保护法案。新法案除了对儿童产品中铅含量的要求更为严格外,还对玩具和儿童护理用品中的有害物质邻苯二甲酸盐的含量做出新的规定。此外,该法案还要求建立消费品安全公共数据库,以及要求某些儿童产品在被进口到美国前必须有获该委员会认可的独立第三方实验室出具的测试报告……影响PSIA影响着美国所有生产、进口、分销玩具、服装和其他儿童产品及护理品的相关行业。所有制造商应该保证其产品符合该法案的所有规定、标准或者规则,在邻苯二甲酸盐含量中,除了DINP、DIDP及DNOP暂时被禁止使用,直到HAP研究报告出台后再决定是否解禁或列为禁止使用外,DEHP、DB及BBP已被禁止使用。PSIA对产品的技术要求及动态含铅或带有含铅涂料儿童产品的要求:对儿童产品所有部件的铅含量实行分阶段限制,要求在3年期限内,最终将产品任何可接触部分总铅含量的限值由不得超过重量的600ppm(0.06%)降至不得超过重量的100ppm(0.01%)。铅含量限值(总铅含量占重量的比重)儿童产品中,非可触及成分除外不超过600ppm(0.06%),法规颁布日期180天后起(2009年2月10日)不超过300ppm(0.03%),法规颁布日期1年后起(2009年8月14日)不超过100ppm(0.01%),法规颁布日期3年后起(2011年8月14日)儿童产品和玩具所涂含铅油漆不超过90ppm(0.009%),法规颁布日期1年后(2009年8月14日)针对某些儿童产品的强制第三方测试要求:法规生效90天后起(2008年11月12日),儿童产品的制造商和自有品牌商必须---将产品送交有资格的独立第三方检测机构进行相关测试---出具证书,证明产品符合适用的标准或法规---具体要强制的产品信息、测试机构要求和时间要求,请关注EBO相关的技术文件更新儿童产品可追溯标签的要求法规生效1年后起(2009年8月14日),儿童产品的制造商必须在其产品及相关包装上加贴性清晰醒目的标志,使消费者可以辨别和确定制造商的名称、生产日期和产地,以及其他相关生产信息,从而确保产品的可追溯性。除非该产品符合该法规或标准适用的安全要求或标准,严禁消费品广告或所述产品的标签及包装包含消费品安全法规或自愿性消费品安全标准方面的指称信息。禁止销售某些含有邻苯二甲酸盐的产品法规生效180天后起(2009年2月10日),任何人提供以下产品属违法行为---生产和销售任何含有浓度高于0.1%的邻苯二甲酸二-2-乙基己酯DEHP、邻苯二甲酸二丁酯DBP或邻苯二甲酸丁苄酯BBP的儿童玩具或儿童保育物品均为违法行为---在一个过渡期内禁止生产或销售含有浓度高于0.1%的邻苯二甲酸二异壬酯DINP、邻苯二甲酸二异癸酯DIDP或邻苯二甲酸二辛酯DnOP的可被放入口中的儿童玩具或儿童保育物品---在此期间,消费品安全委员会被要求组织研究决定是否继续执行这项规定,或者在未来限制其它邻苯二甲酸盐或邻苯二甲酸盐替代品如需了解更多详情,可随时与我联系,测试包括:例如:甲醛、铅、镉、6P、偶氮、重金属,ROHS、VOC、REACH等等…更多详情,请咨询我们或登录我们公司网站。欢迎咨询报价,以下为我们的联系方式:13790591691(黎先生),微信:314148257 more>
Send Inquiry

Burners for low calorific value gases such as blast furnace gas and producer gas
Negotiable
Category: Machinery & Equipment/Electric Heating Equipment/Medium Frequency Power Supplies
Company: 湖北天达热能科技股份有限公司
Product Description: The burner is the most critical core component in various heating equipment systems, providing the primary heat source and serving as a converter that transforms chemical energy into thermal energy. Huangshi Tianda Thermal Energy Technology Co., Ltd. (hereinafter referred to as Huangshi Tianda) offers burners that provide professional selection and matching for various types of hot blast stoves, heat medium heaters, steam boilers, hot water boilers, industrial kilns, industrial smelting equipment, drying systems, and desulfurization and denitrification systems. Huangshi Tianda burners are designed and manufactured in compliance with the latest national standard GB/T 36699-2008, as well as European burner standards such as EN276 and EN676. The burners are categorized into two main types: oil-fired and gas-fired. They consist of a combustion system, fuel system, combustion air system, ignition system, and automatic control system, enabling independent operation or coupled operation with supporting equipment systems for interconnected and mutual control. Huangshi Tianda provides standard configurations and can also offer customized solutions based on specific fuel types and usage requirements. more>
Send Inquiry

DY - Ag5 Silver Solder Strip with 35% silver content is widely used in industries such as electromechanical, electronics, home appliances, hardware, and automotive parts.
$780
Category: Chemicals/Chemical Intermediates/Intermediate Compounds
Company: Xingtai Longcai Trading Co., Ltd.
Product Description: Uses of Dy - Ag5 Silver Solder Strip with 35% Silver ContentSilver solder strip is a high-performance welding material. The 35% silver content silver solder strip offers excellent properties and plays a significant role in various industrial manufacturing fields.General Industrial ApplicationsThe 35% silver content silver solder strip features excellent processability, a moderate melting point, good wettability, and the ability to fill gaps. It also offers high strength, good plasticity, excellent electrical conductivity, and corrosion resistance. It can be used for brazing all ferrous and non-ferrous metals except aluminum, magnesium, and other low-melting-point metals. It is widely used in industries such as electromechanical, electronics, home appliances, hardware, and automotive parts.Specific Industry ApplicationsRefrigeration IndustryIn the manufacturing of refrigeration equipment, the 35% silver solder strip can be used to weld components such as copper pipes. Its good electrical conductivity and corrosion resistance ensure the stable operation of pipeline connections in refrigeration systems, preventing any impact on cooling efficiency due to corrosion or poor conductivity at the welded joints.Lighting IndustryFor the manufacturing of lighting fixtures, the 35% silver solder strip can be used to weld metal components, such as lamp frames and lampshade connections. It provides strong welds while ensuring an aesthetically pleasing appearance, meeting the requirements of lighting products in terms of both appearance and structure.Hardware and Electrical Appliances IndustryIn the production of hardware and electrical appliances, it can be used to weld various electrical components and hardware accessories. For example, it is used for welding metal pins on circuit boards and assembling electrical enclosures. Its good electrical conductivity helps ensure the normal operation of electrical appliances, while its high strength and plasticity prevent welded parts from loosening during long-term use.Instrumentation IndustryInstrumentation requires high welding quality, and the 35% silver solder strip is suitable for welding precision metal components inside instruments. It can perform fine welding in small spaces, ensuring the accuracy and stability of instruments.Chemical IndustryChemical equipment often operates in corrosive environments. The corrosion resistance of the 35% silver solder strip makes it suitable for welding metal pipes, containers, and other components in chemical equipment, ensuring that the equipment continues to function properly despite exposure to chemical substances. more>
Send Inquiry

Octadecyl Erucamide Blown Film Slip and Anti-Blocking Agent for Garment Bags, Non-Dusting and Non-Migrating, Also Functions as Lubricant and Brightener.
$52
Category: Chemicals/Catalysts & Additives/Catalyst Supports
Company: Guangzhou Ouying New Materials Co., Ltd.
Product Description: Stearyl ErucamideChemical names: Crodamide212, Kemamide180, Medium Slip, Stearyl erucamidePhysicochemical properties: This product exhibits excellent lubricity and smoothness, with good thermal stability. It can be used in plastic (resin) processing at temperatures exceeding 300°C. Its usage is increasing with the growing demand for high-temperature resistant polymers. It is particularly useful in film casting processes for engineering plastics. It migrates to the surface of polypropylene copolymers but does not migrate to the core layer of polypropylene homopolymers. It is approved for use in food containers and packaging materials.Quality specifications:ItemStandardAppearanceWhite powder or small granulesMelting point, °C66-75Acid Value, mgKOH/g≤10.0Amine value, mgKOH/g≤5.0Iodine Value, gI₂/100g40-46Color # Gardner≤8Moisture, % more>
Send Inquiry

High-temperature resistant pressure-sensitive adhesive as a substitute for 3M9077 non-woven double-sided tape
$88
Category: Chemicals/Adhesives & Sealants/Other Natural Adhesives
Company: 上海勒普新材料科技有限公司
Product Description: High-temperature resistant acrylic pressure-sensitive adhesive, suitable for 3M9077 tissue paper double-sided tape and non-woven double-sided tape. Withstands 280°C for 1 hour without residue or bubbling after hot/cold peeling, minimal peel force climb, silicone-free pollution & silicone-free residue, adjustable peel force from 30g to 1000g.A high-temperature resistant pressure-sensitive adhesive alternative to 3M9077, can be coated on non-woven substrates to replace 3M9077.Used for high-temperature protective films, PI high-temperature protective films, PET high-temperature protective films, PVDF coating protective films, glass process high-temperature protective films, semiconductor high-temperature tapes, semiconductor high-temperature protective films, PCB process protective films, FPC process protective films. Silicone-free pollution, high-temperature resistance, no change in dyne value before and after. PI high-temperature tapes, Teflon tapes, various high-temperature resistant tapes.Acrylic pressure-sensitive adhesive for FPC high-temperature carrier films, high-temperature resistant without residue.Pressure-sensitive adhesive for glass coating high-temperature protective films, acrylic pressure-sensitive adhesive, high-temperature resistant without residue.Pressure-sensitive adhesive for high-temperature protective films, withstands 280°C for 1 hour without residue.High-temperature resistant pressure-sensitive adhesive, high-temperature resistant acrylic pressure-sensitive adhesive, no residue, high-temperature resistant.Suitable for flexible circuit board bonding, good thermal shock resistance, excellent adhesion to plastics and plastic spacers. Excellent thermal shock resistance, can be used in high-temperature lead-free processes, its release paper can also pass through reflow soldering, and also features low volatility and easy die-cutting. For example: bonding of flexible circuit boards (through high-temperature reflow soldering).The release paper will not carbonize even after reflow soldering at 300 degrees Celsius, meeting lead-free industrial requirements.Double-sided adhesive tape using adhesive and release layer that can withstand high temperatures of lead-free soldering processes (300°C).Used for fixing FPC and reinforcement boards, FPC and frames.Double-sided adhesive tape without substrate and tissue paper composite. High heat resistance and good adhesive strength.The release layer is treated with heat-resistant coating. Has excellent heat resistance, can undergo soldering while the release layer is attached.1. High-temperature release liner, can withstand a typical lead-free reflow soldering process with peak temperatures up to 500°F (260°C).2. Ideal for flexible printed circuit (FPC) attachment, in many areas of electronics subjected to high-temperature processing and operating environments.3. No residue after lead-free reflow.4. High adhesion, good support, and low outgassing. more>
Send Inquiry

What are the functions, uses, and common preparations of pharmaceutical-grade camphor as an active pharmaceutical ingredient?
$面谈
Category: Chemicals/Chemical Intermediates/Intermediate Compounds
Company: 陕西圣瑞医药科技有限公司
Product Description: What are the functions, uses, and common preparations of medicinal camphor as a pharmaceutical-grade active pharmaceutical ingredient?Pharmacopoeia quality standards for pharmaceutical-grade camphor:- Description: White crystalline powder or colorless, translucent hard lumps. When a small amount of ethanol is added, it is easily ground into fine powder; it has a characteristic pungent odor and an initially pungent taste followed by a cooling sensation. It is highly volatile at room temperature and burns with a smoky, luminous flame. It is readily soluble in ethanol, fatty oils, or volatile oils, and very slightly soluble in water.- Melting point: 176–181°C.- Specific optical rotation: Dissolve a precisely weighed sample in ethanol and quantitatively dilute to prepare a solution containing about 0.1g per 1ml. The specific optical rotation is between +41° and +44°.- Identification: Dissolve the sample in ethanol and dilute to prepare a solution containing about 2.5mg per 1ml. Measure the absorbance using ultraviolet-visible spectrophotometry in the wavelength range of 230–350nm. Maximum absorption occurs at 289nm with an absorbance of approximately 0.53. Additionally, the infrared absorption spectrum of the sample should match the reference spectrum (Spectrum Collection, Figure 535).What are the functions, uses, and common preparations of medicinal camphor as a pharmaceutical-grade active pharmaceutical ingredient?Common camphor preparations are mainly divided into topical and oral formulations based on their dosage forms and uses. Below is a detailed introduction:I. Topical Preparations of Medicinal Camphor1. Camphor Ointment  - Ingredients: Primarily contains camphor, often combined with bases such as petroleum jelly.  - Function: Stimulates vasodilation of skin blood vessels, improves local blood circulation, relieves muscle soreness and joint pain, and can also be used to alleviate itching and reduce swelling in the early stages of frostbite.  - Applicable scenarios: Suitable for rheumatoid arthritis, muscle strain, frostbite (when unbroken), etc.  2. Camphor Spirit (Camphor Alcohol Solution)  - Ingredients: A solution of camphor dissolved in ethanol (typically at a concentration of 10%).  - Function: When applied to the skin, the evaporation of ethanol cools the area, while camphor stimulates cold receptors, producing a cooling sensation that provides analgesic and antipruritic effects. It also has some antibacterial properties.  - Applicable scenarios: Used for insect bite dermatitis, skin itching, neurodermatitis, etc. It can also be applied as a topical liniment to relieve muscle soreness.  3. Compound Camphor Cream  - Ingredients: Camphor combined with menthol, methyl salicylate, diphenhydramine, and other components.  - Function: Provides comprehensive analgesic, antipruritic, anti-inflammatory, and antihistamine effects, alleviating both local pain and itching caused by allergies.  - Applicable scenarios: Used for skin conditions such as eczema, allergic dermatitis, insect bite dermatitis, and neurodermatitis.  4. Camphor Liniment  - Ingredients: A mixture of camphor with alcohol, glycerol, etc.  - Function: Stimulates local blood circulation to relieve joint and muscle pain. Glycerol helps keep the skin moist and reduces irritation from alcohol.  - Applicable scenarios: Often used as an adjunct treatment for rheumatoid arthritis, muscle pain, frostbite, etc.  II. Oral Preparations of Medicinal Camphor1. Sodium Camphorsulfonate Injection (for injection)  - Ingredients: Sodium camphorsulfonate, a colorless or slightly yellow clear liquid.  - Function: In small doses, it stimulates the medullary respiratory and vasomotor centers. In larger doses, it excites the cerebral cortex, improving respiratory and circulatory functions.  - Applicable scenarios: Used to treat central respiratory and circulatory insufficiency, respiratory depression caused by drowning or poisoning. It must be administered intravenously or intramuscularly under medical supervision.  2. Camphor Tincture (oral preparation, less common)  - Ingredients: An ethanol solution of camphor (low concentration), prepared according to pharmacopoeial standards.  - Function: When taken orally, it stimulates the gastric mucosa, reflexively exciting the central nervous system. It also has mild carminative and expectorant effects.  - Applicable scenarios: Previously used to treat gastrointestinal flatulence, motion sickness, and seasickness. However, due to camphor's toxicity and side effects, it is now rarely used clinically, and dosage must be strictly controlled.  III. Other Preparations of Medicinal Camphor (Traditional Chinese Medicine or Compound Formulations)1. Bingpeng Powder (contains camphor)  - Ingredients: Borneol, borax, cinnabar, camphor, etc. (a traditional Chinese medicine compound).  - Function: Clears heat, detoxifies, reduces swelling, and relieves pain. Camphor contributes by inducing resuscitation and alleviating pain.  - Applicable scenarios: Used for sore throat, gum swelling and pain, mouth and tongue sores, etc.  2. Essential Balm (contains camphor)  - Ingredients: Menthol, camphor, eucalyptus oil, eugenol, etc.  - Function: Provides cooling, pain relief, wind-dispelling, and antipruritic effects. Camphor enhances analgesic and refreshing effects.  - Applicable scenarios: Used for mosquito bites, motion sickness, headaches, dizziness, etc. It can be applied topically or taken orally in small amounts (follow instructions).     more>
Send Inquiry

Medical Device Number Pain Relief Liniment in Stock, Available as Spray or Applicator, OEM/ODM Services Offered.
Negotiable
Category: Chemicals/Chemical Intermediates/Intermediate Compounds
Company: 日照海旭医疗器械有限公司
Product Description: Rizhao Haixu Medical Equipment Co., Ltd.    15165037451 With 20 years of OEM manufacturing experience, the company possesses a full set of formal qualification certifications and has passed sterile production certification for medical devices. It operates three mature production lines with a daily output of 160,000 bottles of spray. Products are approved by the National Medical Products Administration for medical device production and hygiene permits. Services include packaging customization, formula development, OEM/ODM customization, and logistics transportation.The company produces medical-grade pain relief liniments classified as Category I and II medical devices, with extensive sales channels including pharmacies, clinics, hospitals, e-commerce, and more. Product effectiveness is guaranteed, and options for agency representation or OEM manufacturing are available. Distributors with channels are welcome to call for detailed inquiries    Looking forward to cooperating with you.   more>
Send Inquiry

Winning Bid Pediatric Series of Topical Application Products for Conditions Such as Cold, Cough, Asthma, and Diarrhea
Negotiable
Category: Chemicals/Chemical Intermediates/Intermediate Compounds
Company: 日照海旭医疗器械有限公司
Product Description: Rizhao Haixu Medical Equipment Co., Ltd.: Our company specializes in the production of external patches, with products including pediatric cold patches, diarrhea patches, cough and asthma patches, fever-reducing patches, pneumonia patches, constipation patches, indigestion patches, and more. These patches are made from far-infrared ceramic powder, acrylic pressure-sensitive adhesive, non-woven fabric, and silicone paper, enabling transdermal drug delivery. As a正规 manufacturer, we possess complete Class II medical device approval numbers and qualifications, enjoy medical insurance coverage, and have 27 medical consumable codes. Our products are listed and中标 in procurement networks across the country, available for online distribution with delivery services. With over a decade of clinical use, our products are quality-assured and have established collaborations with numerous hospitals. Distributors with relevant channels are welcome to contact us for detailed inquiries. more>
Send Inquiry

The functions, efficacy, and uses of medicinal-grade silver sulfadiazine (Burnazin) powder as an active pharmaceutical ingredient.
$面谈
Category: Chemicals/Inorganic Salts/Other Inorganic Salts
Company: 陕西圣瑞医药科技有限公司
Product Description: Action, Efficacy, and Uses of Pharmaceutical-Grade Silver Sulfadiazine (Burnazin) Powder as an Active Pharmaceutical IngredientSilver sulfadiazine (Sulfadiazine silver) is a widely used clinical medication that combines sulfadiazine (an antibiotic) with silver ions, offering potent antibacterial and anti-inflammatory effects. As a result, it is extensively employed in the treatment of various skin conditions, burns, and wounds. The pharmacological action of silver sulfadiazine is not only related to its antibacterial properties but also closely associated with the antimicrobial effects of silver ions. Below is a detailed explanation of the action, efficacy, and uses of pharmaceutical-grade silver sulfadiazine:1. Basic Composition and Structure of Silver SulfadiazineSilver sulfadiazine is a silver-based antimicrobial drug formed by combining sulfadiazine and silver ions (Ag⁺). Sulfadiazine is a broad-spectrum sulfonamide antibiotic that primarily exerts its antibacterial effects by inhibiting bacterial folate synthesis. Silver ions, on the other hand, possess strong antimicrobial, anti-inflammatory, and wound-healing properties. Thus, silver sulfadiazine not only inhibits bacterial growth through the antibacterial mechanism of sulfadiazine but also enhances antibacterial efficacy through the action of silver ions, while also providing anti-inflammatory and wound-healing benefits.2. Pharmacological ActionThe main pharmacological actions of silver sulfadiazine include:2.1 Antibacterial ActionSilver sulfadiazine effectively inhibits the growth of various Gram-positive and Gram-negative bacteria. Sulfadiazine works by inhibiting bacterial folate metabolism, preventing the synthesis of amino acids and nucleotides required for DNA production, thereby achieving antibacterial effects. Silver ions, meanwhile, have direct antimicrobial action, disrupting bacterial cell structures, altering cell membrane permeability, and inhibiting bacterial metabolic activities. Silver ions exhibit low resistance development in bacteria, reducing the likelihood of antibiotic resistance during use.2.2 Anti-inflammatory ActionSilver ions have significant anti-inflammatory effects, reducing inflammatory responses in wounded areas and alleviating symptoms such as redness, swelling, heat, and pain. By modulating immune responses and inhibiting the release of certain inflammatory mediators, silver ions help minimize tissue damage and accelerate the healing process.2.3 Promotion of Wound HealingSilver sulfadiazine not only prevents wound infections through its antibacterial action but also promotes wound healing via the effects of silver ions. Silver ions stimulate the proliferation of fibroblasts and keratinocytes and encourage the formation of new blood vessels, thereby accelerating the wound repair process.3. Clinical UsesSilver sulfadiazine is primarily used topically and is commonly employed in the treatment of various skin diseases, burns, wounds, and infectious conditions. Its common clinical applications include:3.1 Burn TreatmentSilver sulfadiazine is widely used in the treatment of burn patients, particularly for second- and third-degree burns, where it demonstrates significant therapeutic effects. It effectively prevents infections at burn sites, reduces bacterial growth on wounds, and promotes healing. Studies show that silver sulfadiazine significantly lowers the incidence of bacterial infections after burns and reduces complications during treatment.3.2 Wound and Ulcer TreatmentFor traumatic injuries, ulcers, surgical incisions, diabetic ulcers, and other wound-related conditions, silver sulfadiazine can be used as a topical medication to help prevent infections and accelerate wound healing. Due to its dual action (antibacterial and healing promotion), it is particularly effective for chronic or hard-to-heal wounds.3.3 Skin InfectionsSilver sulfadiazine can also be used to treat other bacterial skin infections, such as impetigo and skin abscesses. Its antibacterial action effectively controls the source of infection and prevents further bacterial spread.3.4 Management of Chronic Wounds and UlcersFor chronic wounds or ulcers resulting from long-term conditions or chronic diseases (e.g., diabetes), silver sulfadiazine offers specific therapeutic benefits. The antimicrobial action of silver ions reduces wound infections, accelerates the healing process, and prevents further deterioration of the condition.Action, Efficacy, and Uses of Pharmaceutical-Grade Silver Sulfadiazine (Burnazin) Powder as an Active Pharmaceutical Ingredient4. Usage and PrecautionsSilver sulfadiazine is typically used in the form of topical ointments, creams, or salves. Patients should apply the medication to the affected area as directed by a doctor, avoiding direct contact with sensitive areas such as the eyes and mouth. The following precautions should be observed during use:4.1 DosageThe dosage varies depending on the condition. Generally, silver sulfadiazine should be applied to the surface of the wound to keep it moist. For larger wounds, such as burns, it may be necessary to cover the area with gauze or dressings to ensure sustained drug action.4.2 Avoid Long-Term UseAlthough silver sulfadiazine has strong antibacterial effects, prolonged use may lead to the accumulation of silver ions in the body. Therefore, it should be used rationally under medical guidance, avoiding long-term or excessive application.4.3 Allergic ReactionsAlthough allergic reactions to silver sulfadiazine are relatively rare, some sensitive individuals may experience skin allergies, such as redness, itching, or rashes. If these symptoms occur, discontinue use immediately and seek medical attention.4.4 Avoid Drug InteractionsDuring the use of silver sulfadiazine, especially when treating infections, potential interactions with other medications should be considered. If other antibiotics or topical medications are used concurrently, the treatment plan should be adjusted based on medical advice.5. Side Effects and SafetyAs a topical medication, silver sulfadiazine has relatively few side effects, especially when used appropriately. However, some patients may still experience the following adverse reactions:5.1 Local IrritationThe use of silver sulfadiazine may cause mild local irritation, such as burning, itching, or redness. These reactions are generally mild and usually do not require discontinuation of the medication.5.2 Allergic ReactionsIn rare cases, patients may be allergic to silver sulfadiazine, experiencing symptoms such as rashes, erythema, or swelling. If severe allergic reactions occur, discontinue use immediately and seek medical help.5.3 Silver Ion AccumulationLong-term, large-scale use of silver sulfadiazine may lead to the accumulation of silver ions in the body, causing a condition known as argyria, characterized by gray or blue discoloration of the skin, eyes, and other areas. However, this side effect is very rare in short-term treatments and typically resolves gradually after discontinuation.6. Summary and OutlookSilver sulfadiazine is a medication with multiple actions, including antibacterial, anti-inflammatory, and wound-healing properties. It is widely used in the treatment of burns, wounds, ulcers, and various skin infections. Through the synergistic effects of sulfadiazine and silver ions, it effectively controls infections, reduces inflammation, and promotes wound repair, making it one of the commonly used topical antimicrobial agents in clinical practice. more>
Send Inquiry

Warrenson High-Voltage Motor Insulation Sensor WRS-MTS31 is acclaimed as an intelligent monitoring expert safeguarding motor safety.
Negotiable
Category: Machinery & Equipment/Seals & Gaskets/O-Rings
Company: 杭州沃伦森电气有限公司
Product Description: In industrial production, 3kV-12kV motors serve as the core of large-scale process equipment. If issues arise due to insulation problems, it can lead to production line shutdowns in minor cases, and even trigger safety accidents in severe situations. The high-voltage motor insulation online monitoring device (sensor) WRS-MTS31, launched by Volansen Electric, is essentially a specialized "insulation monitoring health device" designed for such motors. It can monitor the insulation status of the motor around the clock, detect problems in advance, issue early warnings, and facilitate timely maintenance.What can it do? Core functions at a glanceIn short, this sensor can act both as an "online supervisor" and an "offline doctor." When the motor is operating, it serves as a "supervisor," monitoring real-time data such as voltage, current, temperature, and humidity. Even under conditions of unstable voltage, abnormal current, or three-phase power imbalance, it can promptly detect issues. Particularly, it can monitor zero-sequence current (a specific type of leakage signal), providing early warnings for leakage risks.When the motor is shut down, it becomes a "doctor": automatically checking whether the motor insulation is in good condition, such as the insulation resistance level and degree of aging. It can also calculate professional indicators like the "polarization index" and "absorption ratio," akin to performing a "CT scan" on the motor to determine if the insulation can still operate safely.Moreover, it is highly "intelligent" and can integrate with the motor control switch: automatically switching to operational monitoring mode after the motor starts, initiating insulation detection after the motor stops, all without manual intervention, making it worry-free and reliable.Why choose it? These advantages are real, mainly including the following points:To ensure operational safety, we have adopted a "high-low voltage separation" design concept, ensuring that the monitoring area is completely isolated from high voltage. This means workers need not worry about the risk of electric shock during operation, even when dealing with motors with voltages as high as 12kV.It can adapt to various environmental conditions: whether in a workshop as cold as -20°C or a high-temperature factory building above 60°C, as long as no condensation forms, it can operate normally. Manufacturing plants located at altitudes below 2,000 meters can also use it, making its application scope quite broad.Flexible connectivity: It supports both wired connections (RS485 interface) for direct integration with factory control systems (such as PLC or DCS), and wireless transmission at 433MHz. For retrofitting old factories, there is no need for disassembly or rewiring, saving costs and providing convenience to users.Timely alerts without delay: Pre-set dual reminders—an alarm when insulation resistance drops below 1000M ohms, and a direct warning when it falls below 500M ohms. Once the red light turns on, it can trigger switch actions without the need for manual monitoring, issuing immediate warnings when problems arise without requiring human intervention.Installation and use are very convenientEasy installation: The main unit can be directly mounted on the control panel (just drill a 150mm×76mm hole), and the accompanying coupler is fixed inside the cabinet with screws. The main unit weighs only 520 grams, and two people can install it in half an hour.User-friendly: The front panel features a screen where data such as insulation resistance, temperature, and humidity are clearly displayed. Button operations are straightforward; modifying parameters or switching pages requires just a few presses, and workers can use it with minimal training.Low power consumption: It operates on standard AC power (85-265V), with a power rating below 15 watts, resulting in low electricity costs even during prolonged operation.Who is it suitable for?As long as there are 3kV~12kV high-voltage motors in the factory, industries such as metallurgy, chemicals, and power can use it to reduce the risk of failures. New factories can equip it during installation of new machines, while old factories can install it for "upgraded health checks" on motors without extensive rewiring. more>
Send Inquiry

DG60 non-magnetic steel can also be referred to as DG60 non-magnetic cemented carbide steel.
$15
Category: Chemicals/Chemical Intermediates/Intermediate Compounds
Company: 东莞市泽信金属材料有限公司
Product Description: DG60DG60 non-magnetic steel, also known as DG60 non-magnetic hard alloy steel, is a type of high-hardness non-magnetic mold steel. This steel can be directly quenched after carburization, offering advantages such as high production efficiency, low cost, and minimal oxidation and decarburization. However, due to its high hardness, it has relatively poor toughness. The as-delivered hardness of DG60 is 55-60 HRC.DG60 non-magnetic steel has a high hardness of HRC 57-61.Q: What material is DG60? Performance introduction.A: DG60 non-magnetic steel. This steel maintains a stable austenitic structure under various conditions, with very low magnetic permeability, high hardness and strength, and relatively good wear resistance.Q: What is the difference between DG60 and imported HPM75?A: HPM75 and DG60 differ in hardness;Q: What is the as-delivered HRC hardness of DG60?A: As-delivered hardness is HRC 57-61;Q: What is the chemical composition of DG60?A: Reference: Ni 55, Cr 45, with the remainder being rare earth elements. Tested hardness ranges from 57 to 61, grain size is grade 5, bending strength is 716 kg, impact toughness is 1.05 KG-M, and magnetic permeability is 1.0001.Q: What is DG60 non-magnetic steel used for?A: DG60 is suitable for manufacturing non-magnetic molds, non-magnetic bearings, and other structural components that require no magnetic induction in strong magnetic fields.Q: Is DG60 the same as stainless steel 304?A: DG60 is a non-magnetic mold material, while 304 is a genuine stainless steel series;Q: What is the price of DG60?A: DG60 non-magnetic steel is divided into two types: raw material and processed material (after solution treatment). Some unscrupulous manufacturers use stainless steel as a substitute, leading many companies to purchase materials in two batches, increasing original costs.Q: What is the heat treatment method for DG60 non-magnetic steel?A: DG60 has already undergone hardness treatment upon delivery.DG60 is a high-hardness non-magnetic mold steel, also known as non-magnetic hard alloy steel; its as-delivered hardness is HRC 58-62. DG60 non-magnetic hard alloy and non-magnetic steel (7Mn15Cr2Al3V2WMo, hereinafter referred to as 7Mn15Cr2Al3V2WMo). Non-magnetic hard alloy offers good wear resistance but has a long production cycle and high mold processing costs, making it suitable for long-term products. 7Mn15 non-magnetic steel has lower wear resistance, a shorter mold manufacturing cycle, and lower costs, making it suitable for products with limited production volumes and short cycle requirements. The application range of DG60 non-magnetic steel is relatively narrow, and its heat treatment and processing工艺流程 as a mold are not widely understood.DG60 (1) Direct Quenching: Direct quenching after carburization offers high production efficiency, low cost, and minimal oxidation and decarburization. However, due to the high carburization temperature, austenite grains grow, resulting in coarse martensite and more retained austenite after quenching, leading to poorer wear resistance and toughness. It is only suitable for fine-grained steels and parts with low wear resistance or low load-bearing requirements.DG60 (2) Single Quenching: After slow cooling from carburization, the steel is reheated above the critical temperature, held, and then quenched. Compared to direct quenching, single quenching can refine the steel's structure to some extent. When high core structure requirements exist, the single quenching temperature is slightly above Ac3. For parts requiring high surface wear resistance and hardness but low load-bearing, the quenching temperature should be 30°C–50°C above Ac1 to refine surface grains while leaving the core structure largely unchanged, resulting in slightly lower performance.DG60 (3) Double Quenching: For parts requiring high mechanical properties or coarse-grained steels, double quenching should be used. The first quenching aims to improve the core structure, with a heating temperature 30°C–50°C above Ac3. The second quenching aims to refine the surface structure, obtaining fine martensite and uniformly distributed granular secondary carbides, with a heating temperature 30°C–50°C above Ac1. DG60 is a high-hardness non-magnetic mold steel, also known as non-magnetic hard alloy steel; its as-delivered hardness is HRC 58-62. Austenitic non-magnetic steels are divided into non-magnetic high-manganese structural steels and non-magnetic stainless steels. Non-magnetic high-manganese structural steels are mainly used in civil fields such as power, transportation, and construction, while non-magnetic stainless steels are primarily used in high-tech fields like national defense and military industries. This analysis covers the domestic and international development and research overview of Fe-Mn series, Fe-Mn-Cr series, and Fe-Mn-Al series non-magnetic high-manganese structural steels, as well as non-magnetic stainless steels. It proposes China's development strategy for creating reduced-resource high-manganese non-magnetic steels that save on metals like Ni, Mo, and Cr, and high-end non-magnetic stainless steels. This approach meets both the mechanical and non-magnetic performance needs of civil applications and the comprehensive performance requirements of national defense and military applications, such as good mechanical properties, weldability, and corrosion resistance.Zexin Metal DG60 Non-Magnetic Steel Grade, Metallographic Structure, Mechanical Properties, Compressive Strength, Yield Strength, Elongation, Reduction of Area, Aging Temperature, Solution Treatment Strength, Processing Tools, Heat Treatment, Chemical Composition, Standard Specific Gravity, Hardness, Density, Non-Magnetic Steel Processing Tools, Non-Magnetic Steel Drilling, Tapping, and other mold steel information, please consult Dongguan Zexin Metal Materials. more>
Send Inquiry

Chlorinated polypropylene modified acrylic resin PP resin can be used as a color paint with adhesion to PP substrates.
$24
Category: Chemicals/Plastics & Products/Plastic Raw Materials
Company: 直尚化工(上海)有限公司
Product Description: Grade: PPE-45Type: Chlorinated Polypropylene Modified Acrylic ResinApplication: PP Substrate PrimerFeatures: Adhesion to PP substrate, suitable for colored paint, silver powder paint, excellent silver powder alignment, good application propertiesTechnical SpecificationsItem Parameter IndexAppearance Transparent viscous liquidColor ≤3Non-volatile content (%) 45±1Viscosity Z2-Z4TG value (°C) 43 more>
Send Inquiry

Food-grade sucralose sweetener with 600 times the sweetness of sugar, used as a sugar substitute in food additives.
$135
Category: Chemicals/Food & Feed Additives/Agar
Company: 郑州超凡化工有限公司
Product Description: Brand: Jinhekang Bao Jiekang 10kg/box    SC20132092400365[Product Name] Sucralose[English Name] Sucralose[Molecular Formula] C12H19Cl3O8[Molecular Weight] 397.64[Chemical Name] 4,1,6-Trichloro-4,1,6-trideoxygalactosucrose[Product Characteristics]Sucralose is a white crystalline powder, almost odorless, non-hygroscopic, and highly soluble in water, ethanol, and methanol. It is currently the only functional sweetener produced from sucrose as a raw material, non-cariogenic, with good stability, especially in aqueous solutions.Source: Sucralose is a high-intensity sweetener obtained by selectively replacing three hydroxyl groups in the sucrose molecule with chlorine atoms. It was first approved for use in food in Canada in 1991.[Product Uses]Sucralose is a semi-natural, non-nutritive sweetener widely used in beverages, food, and other industries. As a new type of non-nutritive sweetener, it is an ideal food additive for individuals with obesity, cardiovascular diseases, and diabetes. Therefore, its application in health foods and other products continues to expand.This food is currently the most ideal high-intensity sweetener, suitable for consumption by children, youth, middle-aged, elderly, and individuals with various diseases, with no nutritional concerns.[Usage Limits]Sucralose tabletop sweetener: 0.05g per packet/tablet; Fruit juice beverages, ice pops, pastries, biscuits: 0.25g  Superior Properties:1. High sweetness, 600-650 times that of sucrose, with a pure sweet taste. The speed of sweetness perception, intensity of maximum sweetness, duration of sweetness, and aftertaste are very close to sucrose, making it an ideal high-intensity sweetener with comprehensive performance.2. Pure taste, without any off-flavors or bitter aftertaste. The sweetness profile almost overlaps with that of sucrose, which is unmatched by any other sweetener.3. Absolute safety, with no concerns regarding toxicology. Extensive long-term toxicological tests have proven its high safety, making it the most excellent functional sweetener currently available. It has been approved for use in over thirty countries, including the United States, Canada, Australia, Russia, and China. Over the past 20 years, sucralose has undergone rigorous and extensive safety evaluations. More than 100 scientific research reports have provided safety data confirming that sucralose is safe and reliable. Environmental studies further confirm that sucralose is harmless to fish and aquatic life and is biodegradable.4. Zero calories, does not cause obesity, suitable for diabetics, individuals with cardiovascular and cerebrovascular diseases, and the elderly.5. Does not cause blood sugar fluctuations, suitable for diabetics.6. Non-cariogenic, beneficial for dental health.7. Excellent solubility and stability, from acidic to neutral conditions, it maintains the sweetness of food, has a diluting effect on sour and salty tastes, masks unpleasant flavors such as astringency, bitterness, and alcoholic taste, and enhances spicy and creamy flavors. It has a wide range of applications. For example:(l)Good thermal stability, with temperature and pH having almost no effect on it. It is more stable than acesulfame potassium in baking processes, suitable for high-temperature sterilization, spray drying, baking, extrusion, and other processes in food processing.(2)Wide pH adaptability, suitable for acidic to neutral foods, and masks unpleasant tastes such as astringency and bitterness.(3)Easily soluble in water, with minimal foaming during dissolution, suitable for high-speed filling production lines of carbonated beverages.[Product Packaging] Sucralose is packaged with two layers of polyethylene plastic bags inside and a cardboard drum outside. Net weight 25kg.[Product Storage] Sucralose should be stored in a dry, clean, and cool place. Shelf life: two years. more>
Send Inquiry

DY-Ag2 silver brazing strip (35%) is used for welding copper-to-copper tube joints in refrigeration systems such as air conditioners, freezers, and refrigerators.
$640
Category: Metallurgy & Minerals/Copper Industry/Copper Pipes
Company: Xingtai Longcai Trading Co., Ltd.
Product Description: Uses of DY-Ag2 Silver Solder StripDY-Ag2 silver solder strip is a specific type of silver solder strip, with its main chemical composition including silver (Ag: 2±1), phosphorus (P: 7±0.5), and copper (Cu: balance). The brazing temperature range for this solder strip is 732-816°C, offering good brazing process performance. Due to its low silver content, it is relatively inexpensive.Main UsesRefrigeration System Welding: DY-Ag2 silver solder strip is widely used in the welding of copper-to-copper pipe joints in refrigeration systems such as air conditioners, freezers, and refrigerators. These systems require reliable connections to ensure sealing and durability.Machinery, Electronics, Home Appliances, Hardware, Automotive Parts, and Other Industries: Due to its excellent fluidity, high joint strength, good plasticity, excellent electrical conductivity, and corrosion resistance, silver solder strips are widely used in these industries. They are suitable for resistance welding, gas flame welding, high-frequency brazing, and some furnace brazing, providing strong and conductive brazed joints.FeaturesGood Fluidity: The silver solder strip exhibits excellent fluidity during brazing, effectively filling the welding area.Cost-Effective: Compared to solder strips with high silver content, DY-Ag2 is more economical.Excellent Process Performance: It has a relatively low melting point, good wettability, and the ability to fill gaps.High Joint Strength: The brazed joints offer high strength and good electrical conductivity.Self-Fluxing: When brazing copper and silver, flux may not be required, simplifying the welding process.Application ExamplesAir Conditioners: In the refrigeration systems of air conditioners, welding copper pipe joints requires reliable solder strips to ensure system sealing and durability.Refrigerators: The refrigeration systems of refrigerators also require silver solder strips for welding copper pipe joints to ensure proper operation.Freezers: In freezer refrigeration systems, welding copper pipe joints with silver solder strips ensures efficient system performance. more>
Send Inquiry

Introduction to the Quality Standards, Uses, and Application Methods of Pharmaceutical-Grade Allantoin as an Active Pharmaceutical Ingredient.
$面谈
Category: Chemicals/Chemical Intermediates/Intermediate Compounds
Company: 陕西圣瑞医药科技有限公司
Product Description: Introduction to the Quality Standards, Uses, and Application Methods of Pharmaceutical-Grade Allantoin Preparations and Raw MaterialsThe following is an introduction to the quality standards, uses, and application methods of allantoin as a raw material:Quality Standards for Pharmaceutical-Grade Allantoin- Appearance: Typically a white crystalline powder, odorless, and tasteless.- Content: Allantoin content should generally be no less than 99.0%.- Melting Point: The melting point ranges between 228-232°C.- Acidity and Alkalinity: pH value is generally between 5.5-7.0.- Related Substances: Detected using methods such as high-performance liquid chromatography to control impurity levels, ensuring they do not exceed specified limits.- Loss on Drying: Typically requires drying at 105°C to constant weight, with weight loss not exceeding 0.5%.- Residue on Ignition: Should not exceed 0.1%.Introduction to the Quality Standards, Uses, and Application Methods of Pharmaceutical-Grade Allantoin Preparations and Raw MaterialsUses of Pharmaceutical-Grade Allantoin- Promoting Skin Wound Healing: Allantoin can stimulate skin cell metabolism, accelerate wound healing, and has significant restorative effects on skin injuries such as burns, scalds, and ulcers.- Moisturizing and Skincare: It has excellent moisturizing properties, increases skin hydration, softens and smoothens the skin, and reduces dryness and cracking. It is commonly used in skincare products such as lotions, creams, and hand creams.- Treating Skin Inflammation: It provides auxiliary treatment for certain skin inflammations like eczema and psoriasis, alleviating symptoms such as itching and redness while reducing inflammatory reactions.Application Methods of Pharmaceutical-Grade Allantoin- Preparation of Topical Formulations: In dermatological topical preparations, allantoin is often combined with other drugs or excipients. For example, when preparing creams, allantoin is first dissolved in an appropriate solvent and then mixed uniformly with an oily base, emulsifiers, etc., to form a cream of a specific concentration. The typical concentration of allantoin in creams ranges from 0.5% to 2%.- Direct Application: For mild skin dryness or cracking, allantoin-containing skincare products or ointments can be applied directly to the affected area, gently massaged until absorbed, and used 2-3 times daily.- Precautions: Avoid contact with eyes and other mucous membranes during use. If allergic or irritant symptoms such as redness, itching, or pain occur at the application site, discontinue use immediately, rinse with water, and consult a doctor if necessary. Follow the advice of a healthcare professional or the instructions on the product label, and avoid excessive or prolonged use.The specific quality standards of allantoin raw materials may vary slightly among different manufacturers. In practical applications, refer to the corresponding quality standards and instructions. When using allantoin-related products, especially for treating skin diseases, it is best to do so under the guidance of a doctor. more>
Send Inquiry

Pharmaceutical grade light liquid paraffin, also known as mineral pharmaceutical excipient, 500ml per bottle, meets pharmacopoeia quality standards.
$12
Category: Chemicals/Chemical Intermediates/Intermediate Compounds
Company: 陕西圣瑞医药科技有限公司
Product Description: 药用级轻质液状石蜡又称矿物药用辅料500ml一瓶药典质量标准药用级轻质液状石蜡,又称矿物油,是一种常用的药用辅料,广泛应用于药物制剂、化妆品和医疗产品中,具有润滑、稀释、保护和稳定作用。根据《中国药典2020年版》(CP版)的要求,药用级轻质液状石蜡的质量标准经过严格规范,以确保其在药物中的安全性和稳定性。1.轻质液状石蜡的化学性质-化学名称:轻质液状石蜡(LightLiquidParaffin)。-分子组成:主要由长链烷烃组成,为无色、无味、透明的黏性液体。-物理特性:-外观:无色透明,光滑油状液体。-气味:无味或稍有轻微气味。-溶解性:不溶于水,溶于有机溶剂等。-功能特性:具有良好的润滑性、惰性、化学稳定性和高安全性,可作为赋形剂、基础油或保护性成分。2.质量标准(CP版)根据《中国药典2020年版》的规定,药用级轻质液状石蜡需符合以下质量指标:-外观:无色透明液体,不得含有可见杂质。-相对密度:应在0.827-0.890范围内,确保其纯净度。-折光率:在1.475-1.481之间,表明其光学纯度符合标准。-粘度:符合药典要求的流动性和润滑性指标。-酸值:应小于0.1mgKOH/g,以确保其化学稳定性,不得含有游离酸。-重金属:含量不得超过10ppm,避免对人体健康造成潜在危害。-紫外吸收:在200nm至400nm的范围内不得有显著吸收,确保其纯净无杂质。-挥发性物质:符合标准要求,挥发性成分低于特定限值。3.轻质液状石蜡的药用功能与应用药用级轻质液状石蜡由于其高纯度和生物相容性,在多种药物制剂中发挥关键作用:-软膏基质:作为软膏、乳膏和凝胶的基础油,用于赋予剂型润滑性和稳定性。-稀释剂和润滑剂:在片剂、胶囊和硬膏中用作润滑剂,帮助改进制剂性能。-护肤制剂:广泛应用于保护性乳膏、润肤剂和防晒产品,形成保护性薄膜,防止水分流失。-灌肠制剂:作为润滑剂,促进直肠药物的顺畅给药。-防护作用:用于医疗敷料和创伤护理产品,提供良好的屏障保护。药用级轻质液状石蜡又称矿物药用辅料500ml一瓶药典质量标准轻质液状石蜡的药用功能与应用药用级轻质液状石蜡由于其高纯度和生物相容性,在多种药物制剂中发挥关键作用:-软膏基质:作为软膏、乳膏和凝胶的基础油,用于赋予剂型润滑性和稳定性。-稀释剂和润滑剂:在片剂、胶囊和硬膏中用作润滑剂,帮助改进制剂性能。-护肤制剂:广泛应用于保护性乳膏、润肤剂和防晒产品,形成保护性薄膜,防止水分流失。-灌肠制剂:作为润滑剂,促进直肠药物的顺畅给药。-防护作用:用于医疗敷料和创伤护理产品,提供良好的屏障保护。药用级轻质液状石蜡又称矿物药用辅料500ml一瓶药典质量标准以下是一些常见的皮肤科原料药和药用辅料:皮肤科原料药:1.葡萄糖酸钙:可降低毛细血管渗透性,适用于过敏疾患,如荨麻疹、湿疹、皮肤瘙痒症等作为辅助治疗。2.苯甲酸:用作防腐剂,也可用于医药、染料载体等,在皮肤科制剂中常作为防腐剂使用,防止微生物生长。3.氯霉素:是一种抗生素,可用于皮肤感染,如脓疱疮、毛囊炎等,具有抗菌消炎作用。4.尿素:作为角质软化药,可提高皮肤的湿度,用于治疗皮肤干燥、皲裂等。皮肤科药用辅料1.二甲基亚砜:是一种溶剂和吸收促进剂,能促进药物透过皮肤吸收,本身也有消炎止痛等作用。2.亚氢钠:药用辅料,在皮肤科制剂中作为抗氧剂,防止药物氧化。3.白凡士林:软膏基质和润滑剂,能在皮肤表面形成保护膜,防止水分散失,起到滋润和保护皮肤的作用。4.白蜂蜡:可作为软膏基质和释放阻滞剂,调节药物的释放速度。5.交联羧甲基纤维素钠:增稠剂、崩解剂,用于增加制剂的黏度和稳定性。6.聚维酮碘:消毒防腐剂,用于化脓性皮炎、皮肤真菌感染、轻度烧烫伤、黏膜创口的消毒。7.炉甘石:有收敛、保护作用,常用于配制洗剂、擦剂等皮肤科外用制剂,治疗湿疹、皮炎等。8.氧化锌:具有收敛、止痒、保护皮肤等作用,常与其他药物配合用于治疗各种皮肤病,如湿疹、痱子等。9.甘油:保湿剂,能吸收空气中的水分,保持皮肤湿润,防止皮肤干燥。10.乳膏基质:作为软膏剂的基质,使药物能均匀地分布在皮肤上,便于涂抹和发挥药效。 more>
Send Inquiry

Atomized low-silicon iron powder grinding-type heavy medium used as a flotation agent in mineral processing enterprises.
$8888
Category: Chemicals/Inorganic Salts/Other Inorganic Salts
Company: 河南新创金属材料有限公司
Product Description: Low Silicon Iron Powder Atomized TypeProduct Application: Used as a heavy medium in the beneficiation industry, such as in the flotation of recycled aluminum, gold ore, diamond ore, etc.Detailed Parameters:Product Model: FeSi15#1. Chemical Composition:Si: 14-16%, Fe: 80-83%2. Particle Size:A: Fine grade:B: Cyclone 60 grade:3. Packaging: 1000kg double-layer ton bag with inner plastic film.Our company provides heavy media for flotation in the beneficiation industry, including gold ore, diamond ore, recycled aluminum, etc.Main products include:Low Silicon Iron Powder Atomized TypeLow Silicon Iron Powder Ground TypeFerrosilicon Granules, etc.Various models and particle sizesLow silicon iron powder is mainly used in industrial beneficiation, typically through density-based separation methods. It effectively separates materials such as gold ore, diamond ore, and waste aluminum, with strong adaptability. The production process is easy to automate. Process parameters such as slurry density, liquid level, viscosity, and magnetic content can be automatically controlled. more>
Send Inquiry

The EC100 series can serve as a cost-effective alternative to imported mass flow controllers (MFCs) from abroad.
Negotiable
Category: Instruments & Meters/Flow Instruments/Other Flow Instruments
Company: 陕西易度智能科技有限公司
Product Description: ——The preferred choice for industry-supporting customers with higher demands for control accuracy and repeatability.The EC100 series Yidu Intelligent can replace imported mass flow controllers MFC. Through precise compensation from built-in pressure and temperature sensors and core algorithms, it demonstrates outstanding performance in low zero point, temperature, and pressure drift. The robust metal housing ensures durability and strong resistance to electromagnetic interference in complex industrial environments. Additionally, it features built-in settings for multiple gases and gas mixtures, as well as digital and analog communication methods, enabling precise measurement and control of flow.Flow range: 0.5 sccm ~ 5000 slpmFeatures:l Principle: Laminar differential pressure flowmeterl High accuracy: ±0.5% of set valuel High repeatability: ±0.1% F.S.l Wide temperature and pressure range: -20°C ~ 60°C, within 1 MPal Standard: Digital signal RS485; Optional: Analog signal 0-20mA or 0~5Vl Built-in measurement for 70 gases and gas mixturesl Provides PC software for real-time display and data downloadUsage conditions:l Compatible with built-in 70 gases and editable gas mixturesl Valve type: N/C (normally closed)l Operating flow range: 1% ~ 120% F.S.l Medium temperature: -20°C ~ 60°Cl Ambient temperature: -20°C ~ 50°Cl Operating humidity: 0% ~ 98% (non-condensing)l Operating differential pressure range: 100 kPa ~ 700 kPal Operating pressure: 1 MPal Pressure resistance: 1.5 MPal Supply voltage: ﹢(19~29) VDCl Current consumption: more>
Send Inquiry

Food-grade sodium diacetate preservative with 99% purity, suitable for use as a food additive in pastries and puffed foods.
$10
Category: Chemicals/Food & Feed Additives/Defoamers
Company: 郑州超凡化工有限公司
Product Description: Brand: Tongyuan/Kelduo   25kg/bag, 1kg/bagSodium Diacetate can be provided in 1kg aluminum foil bagsModel: Food Grade, Industrial Grade, Feed GradePackaging: 25kg cardboard drum (lined with polyethylene bag)Content: 99.9%Origin: Domestic/ImportedCAS: 126-96-5Appearance: White powderUsage: Preservative, Antifungal Agent, Chelating Agent, Flavoring Agent, pH Regulator, Meat Product Preservative[Product Name] Sodium Diacetate[Common Name] Sodium Diacetate (SDA)[English Name] Sodium diacetate[Molecular Formula] C4H7NaO4•XH2O[Structural Formula] CH3COONaCH3COOH•H2O[Molecular Weight] 142.09[Appearance]Sodium Diacetate is a white crystalline powder or crystalline solid with an acetic acid odor, non-toxic, and easily soluble in water and ethanol.[Product Usage]Sodium Diacetate is a versatile food chemical, primarily used as a preservative, antifungal agent, chelating agent, flavoring agent, pH regulator, and meat product preservative in the food and feed industries. It is also a key raw material for compound antifungal agents. In addition to its excellent antifungal, preservative, and freshness-preserving effects, Sodium Diacetate (SDA) can enhance appetite, promote feed conversion and absorption, and improve the utilization of protein in feed. It is widely used as an antifungal agent, preservative, flavoring agent, disinfectant, and pH regulator. Some examples include:1. Adding 0.1-0.2% (1-2 kg/ton) of SDA to feed can effectively prevent mold growth, extending the storage period of feed by 1-2 months. Adding 0.1-0.3% of SDA to compound feed and silage can preserve the feed for 3-5 months.2. As a nutritional flavoring agent:Adding 0.05-0.2% of SDA to pellet compound feed can increase protein utilization by 11%, improve fish weight gain by over 10%, increase piglet weight gain by 6-8%, enhance weight gain in broilers and ducks by 6-10%, and boost weight gain in beef cattle by 15%. Feed intake generally increases by 10-20%.[Packaging and Storage]1. Sodium Diacetate is packaged with a plastic bag as the inner layer and a woven bag as the outer packaging, with a net weight of 25kg.2. Store Sodium Diacetate in a sealed, cool, dry place, protected from light and moisture. Do not store with other alkaline substances.[Technical Specifications] Sodium DiacetateGrade: Food Grade, Feed GradeSodium Acetate%   58.0-60.056.0-58.0Moisture%  ≤2.0      ≤4.0pH (10% aqueous solution)4.5-5.0  4.5-5.0Formic Acid and Readily Oxidizable Substances%≤0.2  ≤0.2Arsenic (as As)%≤0.0003  ≤0.0006Heavy Metals (as Pb)%≤0.0001  ≤0.002 more>
Send Inquiry