$4
Product Description: Precast Box Girder Release AgentInstructions for using precast box girder release agent:Spray or brush the product directly onto the surface of the item to be released. The recommended dilution ratio for the precast box girder release agent is 3-10 times, and the specific amount used should be adjusted according to the product system.The main functions of the precast box girder release agent include reducing the adhesion between concrete and the formwork, making the concrete surface smooth and even, protecting the formwork from oxidation or corrosion, and facilitating the cleaning of the formwork surface.The precast box girder release agent plays an important role on construction sites. Firstly, it reduces the adhesion between concrete and the formwork, making it easier to separate the formwork from the concrete during demolding, thereby avoiding damage to the concrete surface due to excessive adhesion. Secondly, using the precast box girder release agent helps maintain a smooth and even concrete surface, preventing issues such as adhesion marks and surface roughness, thus improving the appearance quality of the concrete. Additionally, the precast box girder release agent forms a protective film on the formwork surface, preventing oxidation or corrosion and extending the formwork's service life. Finally, the use of the precast box girder release agent makes formwork cleaning more convenient, reducing cleaning time and costs.Precast box girder release agent refers to a substance applied to the construction formwork before concrete pouring to prevent the formwork from sticking to the concrete surface after pouring, making demolding difficult, or affecting the smoothness of the concrete surface. Its main function is to form a film between the formwork and the concrete surface, isolating the two, hence it is also called a release agent.Precast box girder release agent is also a water-soluble release agent, meaning its internal components can completely dissolve in water. Emulsions of compounds such as methyl silicone oil are commonly used in industry. The emulsion is water-soluble and can achieve high heat resistance, easy cleaning, good corrosion resistance, fire resistance, minimal environmental pollution, and relatively safe transportation and storage.Due to its high water content, water-based precast box girder release agents differ in many aspects from traditional oil-based or solvent-based release agents. The demolding effect of the precast box girder release agent depends on a film only a few micrometers thick deposited on the cavity surface after spraying. Therefore, there are higher requirements for component selection and process use. However, its advantages are also evident, favoring automated operation, good cooling effect, no scaling, improved surface quality of castings, reduced internal porosity, safe use, clean production, and reduced environmental pollution.Precautions for using precast box girder release agent:1. Dilute with water (dilution ratio 3-10 times as appropriate), and mix evenly. The dilution ratio can also be adjusted according to on-site needs. Try to use the diluted mixture all at once.2. Apply using a spray gun or roller brush. After applying the precast box girder release agent, wait until the model is completely dry before pouring concrete.3. Clean the surface of the formwork or model before application.4. Store at room temperature, protect from freezing and direct sunlight. After opening, ensure the container is sealed and stored properly.5. Avoid construction during rain. If the applied agent is washed away by rain, reapply before proceeding.6. Packaging specification: 50KG drum.The precast box girder release agent has strong adhesion, allowing it to preferentially adhere to the mold without transferring to the molded part. It can also modify the resin surface, improving resin flowability and surface quality. It is widely used for demolding molds, silicone rubber, plastics, and other products.Advantages of precast box girder release agent:1. Fast film formation, waterproof冲刷 protection for formwork, no residue; waterproof and rust-proof.2. Excellent release performance, resulting in a clean, smooth, and uncontaminated concrete surface.3. Easy demolding. After demolding, the surface remains smooth and even, with neat edges and corners, and no damage.
more>
