Imyidagaduro yo gushyira hamwe no gushyira hanze ya jet ifite umuvuduko mwinshi

Jets High-Speed Mixing and Dispersing Machine

Product Introduction:

     The Jets High-Speed Mixing and Dispersing Machine is used in applications where traditional stirring cannot meet requirements, such as the production of emulsions and suspensions. Effects that traditional stirring takes hours to achieve can be accomplished by batch dispersers in minutes. Its effectiveness is based on the rotor-stator principle. The circumferential speed of the rotor provides the necessary shear force for reducing droplets and solid particles.

Working Principle:

High-shear dispersing emulsifying machine, high-shear homogenizing emulsifying machine, intermittent high-shear emulsifying dispersing machine

High-shear dispersing emulsification is the process of efficiently, rapidly, and uniformly bringing one or more phases (liquid, solid, gas) into another immiscible continuous phase (usually liquid). Under normal circumstances, each phase is immiscible. When external energy is input, the two materials recombine into a uniform phase. Due to the high tangential speed generated by the high-speed rotation of the rotor and the strong kinetic energy brought by high-frequency mechanical effects, the material is subjected to comprehensive effects such as strong mechanical and hydraulic shear, centrifugal extrusion, liquid layer friction, impact tearing, and turbulence in the narrow gap between the stator and rotor, forming suspensions (solid/liquid), emulsions (liquid/liquid), and foams (gas/liquid). Thus, under the combined action of corresponding mature processes and appropriate additives, the immiscible solid, liquid, and gas phases are instantly and uniformly finely dispersed and emulsified. After high-frequency cycles, stable high-quality products are finally obtained. 

For decades, the DISPERSING series products have been synonymous with quality and reliability, applicable to almost all emulsification, suspension, and dissolution processes. Different working head (rotor + stator) structures can meet different mixing, dispersing, and emulsification requirements. There are multiple sealing methods, which can be installed at different positions of the container and can operate under conditions of 16 bar and 160 degrees Celsius.

Product Parameters:

The EC series offers two flange installations: KT (atmospheric pressure type) and KD (pressure-resistant type). It is suitable for atmospheric pressure, closed, vacuum, and pressure working conditions.
· Bearing support, modular combination, no pollution to materials, it is an ideal choice for high-clean requirements in chemical, food, and cosmetics industries.
· Reasonable design, easy to clean and disassemble, meets GMP hygiene requirements.
· Seals available for selection: skeleton seal, mechanical seal.
· Fully realizes high-quality dispersion, emulsification, homogenization, dissolution, and reaction, making your production efficient and smooth.

Recommended feeding sequence

When using a high-shear mixing emulsifier, the recommended material supply process is as follows:

1. Add all components with the minimum viscosity to the container and start mixing.

2. Add the remaining liquid or soluble components.

3. Add solids that require intense mechanical stirring or solids that require a certain period of chemical reaction.

· Main optional working head types:

1. The upper limit batch processing capacity in the table is measured with water as the medium; 
2. The batch processing capacity depends on the viscosity and solid content of the material. If you encounter difficulties in model selection, please contact Yuedi Company by phone; 
3. For special requirements such as high temperature, flammable and explosive, corrosion, etc., please confirm in text form before customization to avoid danger and loss; 
4. The data in this table may not be accurate due to technical improvements and customization, and the actual product shall prevail.