Stainless steel intermittent hydraulic lifting emulsifier
Contact Info
- No.4285 Shendu Highway, Pujiang Town, 200000
- 胡工
- 18001633556
- 15000845544@163.com
Stainless Steel Intermittent Hydraulic Lifting Emulsifier
Product Introduction:
Stainless Steel Intermittent Hydraulic Lifting Emulsifier is used in applications where traditional stirring cannot meet requirements, such as the production of emulsions and suspensions. Effects that traditional stirring would take hours to achieve can be accomplished by batch dispersers in just a few minutes. Its effectiveness is based on the rotor-stator principle. The circumferential speed of the rotor provides the necessary shear force to reduce droplets and solid particles.
Working Principle:
High-shear dispersing emulsifier, high-shear homogenizing emulsifier, intermittent high-shear emulsifying disperser
High-shear dispersion and emulsification is the process of efficiently, rapidly and uniformly bringing one or more phases (liquid, solid, gas) into another immiscible continuous phase (usually liquid). Under normal circumstances, each phase is immiscible. When external energy is input, the two materials recombine into a homogeneous phase. Due to the high tangential speed generated by the high-speed rotation of the rotor and the strong kinetic energy brought by high-frequency mechanical effects, the material is subjected to comprehensive effects such as strong mechanical and hydraulic shear, centrifugal extrusion, liquid layer friction, impact tearing and turbulence in the narrow gap between the stator and rotor, forming a suspension (solid/liquid), emulsion (liquid/liquid) and foam (gas/liquid). Under the combined action of the corresponding mature process and appropriate additives, the immiscible solid phase, liquid phase and gas phase are uniformly and finely dispersed and emulsified instantly. After high-frequency cycles, stable high-quality products are finally obtained.
For decades, the DISPERSING series products have been synonymous with quality and reliability, and can be applied to almost all emulsification, suspension and dissolution processes. Different working head (rotor + stator) structures can meet different mixing, dispersing and emulsification requirements. There are multiple sealing methods, which can be installed at different positions of the container and can work under conditions of 16 bar and 160°C.
Product Parameters:
The EC series offers two flange installations: KT (atmospheric pressure type) and KD (pressure-resistant type). It is suitable for atmospheric pressure, closed, vacuum and pressure working conditions.
· Bearing-supported, modular design, no pollution to materials, making it an ideal choice for industries such as chemicals, food and cosmetics that require high cleanliness.
· Reasonable design, easy to clean and disassemble, meeting GMP hygiene requirements.
· Sealing options available: skeleton seal, mechanical seal.
· Fully realizes high-quality dispersion, emulsification, homogenization, dissolution and reaction, making your production work smoothly.
Recommended Order of Adding Materials
When using a high-shear mixing emulsifier, the recommended material feeding steps are as follows:
1. Add all components with the minimum viscosity to the container and start mixing.
2. Add the remaining liquid or soluble components.
3. Add solids that require vigorous mechanical stirring or solids that require a certain period of chemical reaction.
· Main optional working head types:
Model | Size | Processing Capacity | Motor Power | Standard Speed @60Hz | Linear Speed @60Hz |
Liter L | kW@50Hz | rpm | m/s | ||
EC 80 | 80 | 150 | 2.2 | 3600 | 12 |
EC 115 | 115 | 500 | 3 | 3600 | 17 |
EC 150 | 150 | 1,700 | 5.5 | 3600 | 24 |
EC 220 | 220 | 2,500 | 7.5 | 1800 | 17 |
EC 280 | 280 | 3,500 | 18.5 | 1800 | 22 |
EC 300 | 300 | 4,000 | 22 | 1800 | 24 |
EC 330 | 330 | 5,000 | 30 | 1000 | 27 |
1. The upper limit batch processing capacity in the table is measured with water as the medium;
2. The batch processing capacity depends on the viscosity and solid content of the material. If you encounter difficulties in model selection, please contact Yuedi Company by phone;
3. For special requirements such as high temperature, flammability, explosiveness and corrosion, please confirm and customize in writing to avoid danger and losses;
4. The data in this table may be inconsistent due to technical improvements or customization. Please refer to the actual product.
| Machinery & Equipment/General Mechanical Parts/Mixers & Blenders | |
